Ultra Wide Swath Imaging With Multi-Channel SAR Systems

Multi-channel radar systems allow for overcoming the inherent limitation of conventional synthetic aperture radar (SAR). An example is the combination of digital beamforming on receive in elevation with multi-aperture SAR signal reconstruction in azimuth which enables high-resolution wide-swath. As a next step, focus is turned to advanced concepts for the imaging of even wider swaths with high azimuth resolution. In this regard, the paper investigates the operation of multi-channel SAR systems in burst modes like ScanSAR or TOPS-SAR and analyses aspects of applying the multi-aperture reconstruction algorithm in combination with burst mode operation. The impact of the digital processing network on the SNR and the azimuth ambiguity-to-signal-ratio in multi-channel burst mode systems are considered and embedded in the design example of a ScanSAR system that enables the imaging of a 400 km wide swath with a geometric resolution of 5

Advanced Concepts for Ultra-Wide-Swath SAR Imaging

This paper reviews advanced multi-channel SAR system concepts for the imaging of ultra-wide swaths with high azimuth resolution. Novel system architectures and operational modes are introduced and compared to each other with regard to their performance

Advanced Synthetic Aperture Radar Based on Digital Beamforming and Waveform Diversity

This paper introduces innovative SAR system concepts for the acquisition of high resolution radar images with wide swath coverage from spaceborne platforms. The new concepts rely on the combination of advanced multi-channel SAR front-end architectures with novel operational modes. The architectures differ regarding their implementation complexity and it is shown that even a low number of channels is already well suited to significantly improve the imaging performance and to overcome fundamental limitations inherent to classical SAR systems. The more advanced concepts employ a multidimensional encoding of the transmitted waveforms to further improve the performance and to enable a new class of hybrid SAR imaging modes that are well suited to satisfy hitherto incompatible user requirements for frequent monitoring and detailed mapping. Implementation specific issues will be discussed and examples demonstrate the potential of the new techniques for different remote sensing applications

Ultra-Wide Swath SAR Imaging With Continuous PRF Variation

Innovative multi-channel synthetic aperture radar (SAR) concepts enable high-resolution wide-swath imaging, but the antenna length typically restricts the achievable swath width. This limitation can be overcome by a novel technique which is based on a single azimuth channel but operates the system with a continuously varied pulse repetition frequency (PRF) by this allowing in principle for arbitrary wide swaths. This paper introduces the basic principles and discusses design constraints for such a PRF variation. Further, a systematic performance analysis of an L-band reflector antenna system is carried out with focus on the sensitivity versus different input parameters

A Modified SweepSAR Mode with Dual Channels for High Resolution and Wide Swath

In this study, an imaging mode of the modified SweepSAR is proposed with performance analysis for a high-resolution and wide swath coverage. To reduce the overall antenna size required for the solution of the azimuth ambiguity problem, different pulse repetition frequencies (PRFs) are utilized for different transmitters, respectively. For each imaging mode, system performance parameters are used for simulation, analysis, wide swath prediction, and comparison between conventional ScanSAR mode and SweepSAR mode based on scan-on-receive (SCORE). The system parameters of AASR, RASR, and NESZ will be estimated and suggested on the imaging mode by using appropriate reflector antenna with the effectiveness of a modified SweepSAR employing dual channels

Opportunistic radar imaging using a multichannel receiver

Bistatic Synthetic Aperture Radars have a physically separated transmitter and receiver where one or both are moving. Besides the advantages of reduced procurement and maintenance costs, the receiving system can sense passively while remaining covert which offers obvious tactical advantages. In this work, spaceborne monostatic SARs are used as emitters of opportunity with a stationary ground-based receiver. The imaging mode of SAR systems over land is usually a wide-swath mode such as ScanSAR or TOPSAR in which the antenna scans the area of interest in range to image a larger swath at the expense of degraded cross-range resolution compared to the conventional stripmap mode. In the bistatic geometry considered here, the signals from the sidelobes of the scanning beams illuminating the adjacent sub-swath are exploited to produce images with high cross-range resolution from data obtained from a SAR system operating in wide-swath mode. To achieve this, the SAR inverse problem is rigorously formulated and solved using a Maximum A Posteriori estimation method providing enhanced cross-range resolution compared to that obtained by classical burst-mode SAR processing. This dramatically increases the number of useful images that can be produced using emitters of opportunity. Signals from any radar satellite in the receiving band of the receiver can be used, thus further decreasing the revisit time of the area of interest. As a comparison, a compressive sensing-based method is critically analysed and proves more sensitive to off-grid targets and only suited to sparse scene. The novel SAR imaging method is demonstrated using simulated data and real measurements from C-band satellites such as RADARSAT-2 and ESA’s satellites ERS-2, ENVISAT and Sentinel-1A. In addition, this thesis analyses the main technological issues in bistatic SAR such as the azimuth-variant characteristic of bistatic data and the effect of imperfect synchronisation between the non-cooperative transmitter and the receiver

Design Options For Low Cost, Low Power Microsatellite Based SAR.

This research aims at providing a system design that reduces the mass and cost of spaceborne Synthetic Aperture Radar (SAR) missions by a factor of two compared to current (TecSAR - 300 kg, ~ £ 127 M) or planned (NovaSAR-S — 400 kg, ~ £ 50 M) mission. This would enable the cost of a SAR constellation to approach that of the current optical constellation such as Disaster Monitoring Constellation (DMC). This research has identified that the mission cost can be reduced significantly by: focusing on a narrow range of applications (forestry and disasters monitoring); ensuring the final design has a compact stowage volume, which facilitates a shared launch; and building the payload around available platforms, rather than the platform around the payload. The central idea of the research has been to operate the SAR at a low instantaneous power level—a practical proposition for a micro-satellite based SAR. The use of a simple parabolic reflector with a single horn at L-band means that a single, reliable and efficient Solid State Power Amplifier (SSPA) can be used to lower the overall system cost, and to minimise the impact on the spacecraft power system. A detailed analysis of basic pulsed (~ 5 - 10 % duty cycle) and Continuous Wave (CW) SAR (100 % duty cycle) payloads has shown their inability to fit directly into existing microsatellite buses without involving major changes, or employing more than one platform. To circumvent the problems of pulsed and CW techniques, two approaches have been formulated. The first shows that a CW SAR can be implemented in a mono-static way with a single antenna on a single platform. In this technique, the SAR works in an Interrupted CW (ICW) mode, but these interruptions introduce periodic gaps in the raw data. On processing, these gapped data result in artefacts in the reconstructed images. By applying data based statistical estimation techniques to “fill in the gaps” in the simulated raw SAR data, this research has shown the possibility of minimising the effects of these artefacts. However, once the same techniques are applied to the real SAR data (in this case derived from RADARSAT-1), the artefacts are shown to be problematic. Because of this the ICW SAR design technique it is—set aside. The second shows that an extended chirp mode pulsed (ECMP) SAR (~ 20 - 54 % duty cycle) can be designed with a lowered peak power level which enables a single SSPA to feed a parabolic Cassegrain antenna. The detailed analysis shows the feasibility of developing a microsatellite based SAR design at a comparable price to those of optical missions

On a Dual-Sequence Stripmap Imaging Mode as Alternative for High-Resolution Wide-Swath SAR

Future spaceborne synthetic aperture radar (SAR) systems are subject to conflicting high-resolution and wideswath imaging requirements. As several studies show, this fundamental conflict can be resolved by advanced instrument modes employing multiple receive channels in elevation and/or azimuth (MAPS). Currently, SAR system concepts include MAPS-ScanSAR systems and Staggered-SAR systems with Scan-on-Receive (SCORE). These show disadvantages: either scalloping or increased sampling rate/on-board complexity need to be tolerated. This paper discusses a method to achieve high-resolution imaging using complementary coverage of a wide swath with two (interleaved) constant-PRI sequences, motivated by the goal of avoiding Doppler spectral gaps but also limiting system-complexity

Multifrequency Subpulse SAR: Exploiting Chirp Bandwidth for an Increased Coverage

Spatial resolution and swath width are fundamental quality parameters for spaceborne synthetic aperture radar (SAR) products. They have driven the research on new spaceborne SAR system concepts in the last decades, and a new generation of SAR systems is emerging. Main feature of these future systems is the use of multiple digital channels and new SAR processing techniques. A further characteristic is that they can resort to a large radar signal bandwidth. In this paper, a novel SAR operational mode is presented, denoted as multifrequency subpulse (MFSP). The MFSP exploits the available radar signal bandwidth to increase the imaged swath extension, without the emergence of range ambiguities. The proposed approach is explained both theoretically and by a design example, based on the future German X-band SAR system, High-Resolution Wide-Swath (HRWS). Moreover, the achievable SAR imaging quality is investigated