4,155 research outputs found
Optimization Based Self-localization for IoT Wireless Sensor Networks
In this paper we propose an embedded optimization framework for the simultaneous self-localization of all sensors in wireless sensor networks making use of range measurements from ultra-wideband (UWB) signals. Low-power UWB radios, which provide time-of-arrival measurements with decimeter accuracy over large distances, have been increasingly envisioned for realtime localization of IoT devices in GPS-denied environments and large sensor networks. In this work, we therefore explore different non-linear least-squares optimization problems to formulate the localization task based on UWB range measurements. We solve the resulting optimization problems directly using non-linear-programming algorithms that guarantee convergence to locally optimal solutions. This optimization framework allows the consistent comparison of different optimization methods for sensor localization. We propose and demonstrate the best optimization approach for the self-localization of sensors equipped with off-the-shelf microcontrollers using state-of-the-art code generation techniques for the plug-and-play deployment of the optimal localization algorithm. Numerical results indicate that the proposed approach improves localization accuracy and decreases computation times relative to existing iterative methods
Accurate TOA-Based UWB Localization System in Coal Mine Based on WSN
AbstractOver the last years, there has been a great deal of interest in Ultra Wideband (UWB) wireless communication and Wireless Sensor Networks(WSN), especially following the proposing of the internet of things by the MIT (Massachusetts Institute of Technology) in 1999, hich is also result in an increasing research on UWB and WSN applications. This article mainly introduced the accurate UWB Localization System based on WSN in coal mine. Firstly, we briefly introduced UWB and WSN Localization technology. Secondly, the advantages and disadvantages of the previous personnel localization technology in coal mine was analyzed and contrasted, and then the suitable personnel localization system in coal mine based on UWB signal and TOA estimate positioning scheme are presented. At last the rationality and feasibility of this scheme was proved through the simulation results
Cooperative Relative Positioning of Mobile Users by Fusing IMU Inertial and UWB Ranging Information
Relative positioning between multiple mobile users is essential for many
applications, such as search and rescue in disaster areas or human social
interaction. Inertial-measurement unit (IMU) is promising to determine the
change of position over short periods of time, but it is very sensitive to
error accumulation over long term run. By equipping the mobile users with
ranging unit, e.g. ultra-wideband (UWB), it is possible to achieve accurate
relative positioning by trilateration-based approaches. As compared to vision
or laser-based sensors, the UWB does not need to be with in line-of-sight and
provides accurate distance estimation. However, UWB does not provide any
bearing information and the communication range is limited, thus UWB alone
cannot determine the user location without any ambiguity. In this paper, we
propose an approach to combine IMU inertial and UWB ranging measurement for
relative positioning between multiple mobile users without the knowledge of the
infrastructure. We incorporate the UWB and the IMU measurement into a
probabilistic-based framework, which allows to cooperatively position a group
of mobile users and recover from positioning failures. We have conducted
extensive experiments to demonstrate the benefits of incorporating IMU inertial
and UWB ranging measurements.Comment: accepted by ICRA 201
Locating the information: applications, technologies and future aspects
In today’s world, the demand for information is growing rapidly with respect to the human curiosity to explore the inside and the outside of our planet. In a simple analogy, the human body has thousands of sensors called receptor neurons to obtain information such as temperature or pressure from the environment. Similarly, recent developments in electronics and wireless communications lead engineers to the design of small-sized, low-power, low-cost sensor nodes which have the ability to communicate with each other over short distances and collect the information that is gathered
D-SLATS: Distributed Simultaneous Localization and Time Synchronization
Through the last decade, we have witnessed a surge of Internet of Things
(IoT) devices, and with that a greater need to choreograph their actions across
both time and space. Although these two problems, namely time synchronization
and localization, share many aspects in common, they are traditionally treated
separately or combined on centralized approaches that results in an ineffcient
use of resources, or in solutions that are not scalable in terms of the number
of IoT devices. Therefore, we propose D-SLATS, a framework comprised of three
different and independent algorithms to jointly solve time synchronization and
localization problems in a distributed fashion. The First two algorithms are
based mainly on the distributed Extended Kalman Filter (EKF) whereas the third
one uses optimization techniques. No fusion center is required, and the devices
only communicate with their neighbors. The proposed methods are evaluated on
custom Ultra-Wideband communication Testbed and a quadrotor, representing a
network of both static and mobile nodes. Our algorithms achieve up to three
microseconds time synchronization accuracy and 30 cm localization error
Joint Ultra-wideband and Signal Strength-based Through-building Tracking for Tactical Operations
Accurate device free localization (DFL) based on received signal strength
(RSS) measurements requires placement of radio transceivers on all sides of the
target area. Accuracy degrades dramatically if sensors do not surround the
area. However, law enforcement officers sometimes face situations where it is
not possible or practical to place sensors on all sides of the target room or
building. For example, for an armed subject barricaded in a motel room, police
may be able to place sensors in adjacent rooms, but not in front of the room,
where the subject would see them. In this paper, we show that using two
ultra-wideband (UWB) impulse radios, in addition to multiple RSS sensors,
improves the localization accuracy, particularly on the axis where no sensors
are placed (which we call the x-axis). We introduce three methods for combining
the RSS and UWB data. By using UWB radios together with RSS sensors, it is
still possible to localize a person through walls even when the devices are
placed only on two sides of the target area. Including the data from the UWB
radios can reduce the localization area of uncertainty by more than 60%.Comment: 9 pages, conference submissio
- …