Wideband and UWB antennas for wireless applications. A comprehensive review

A comprehensive review concerning the geometry, the manufacturing technologies, the materials, and the numerical techniques, adopted for the analysis and design of wideband and ultrawideband (UWB) antennas for wireless applications, is presented. Planar, printed, dielectric, and wearable antennas, achievable on laminate (rigid and flexible), and textile dielectric substrates are taken into account. The performances of small, low-profile, and dielectric resonator antennas are illustrated paying particular attention to the application areas concerning portable devices (mobile phones, tablets, glasses, laptops, wearable computers, etc.) and radio base stations. This information provides a guidance to the selection of the different antenna geometries in terms of bandwidth, gain, field polarization, time-domain response, dimensions, and materials useful for their realization and integration in modern communication systems

UWB Technology

Ultra Wide Band (UWB) technology has attracted increasing interest and there is a growing demand for UWB for several applications and scenarios. The unlicensed use of the UWB spectrum has been regulated by the Federal Communications Commission (FCC) since the early 2000s. The main concern in designing UWB circuits is to consider the assigned bandwidth and the low power permitted for transmission. This makes UWB circuit design a challenging mission in today's community. Various circuit designs and system implementations are published in this book to give the reader a glimpse of the state-of-the-art examples in this field. The book starts at the circuit level design of major UWB elements such as filters, antennas, and amplifiers; and ends with the complete system implementation using such modules

DUAL AND TRI-BAND-NOTCHED ULTRAWIDEBAND (UWB) ANTENNAS USING COMPACT COMPOSITE RESONATORS

Abstract-An ultra-wideband (UWB) antenna with triple bandnotched characteristics is presented in this paper. The triple-notched bands (5. GHz for WLAN, 7.9-8.395 GHz for X-band) are achieved by using only one novel composite resonator with multiple resonant characteristics. The resonator is placed on the back surface of the substrate and connected to the radiation patch through one via-hole. An equivalent circuit model is built for analyzing the band-notched characteristics. Moreover, the notched bands can be adjusted independently, and the resonator structure is very compact

Design a new notched UWB antenna to rejected unwonted band for wireless communication

This paper presents a slotted design for ultra-wideband (UWB) antenna. Design of a rectangular UWB antenna covering the frequency range 3.1-10.6 GHz, to achieve notch characteristics in the bands at 3.1-8.4 GHz and 8.6-10.6 GHz. By changing the direction of distribution of current to apply this technique by inserting three C-shaped holes and two pairs of rectangular notches below the antenna. The simulation results reveal that the proposed structure is in good accord with the simulation results. The proposed UWB antenna size is (100x90x1.6 mm)3. This proposed design could provide a solution to eliminating bands that interfere in a UWB band depending on the aperture design. The simulated findings reveal that the UWB antenna operates in the 8.5 GHz center frequency range and rejects all frequency bands utilizing slits. This antenna design can provide a solution to remove UWB bands from 3.1-10.6 except for 8.5 GHz which only works. By using the notch, we got a large increase in the gain. makes to be a suitable candidate for X-band-UWB applications

Ultra Wideband

Ultra wideband (UWB) has advanced and merged as a technology, and many more people are aware of the potential for this exciting technology. The current UWB field is changing rapidly with new techniques and ideas where several issues are involved in developing the systems. Among UWB system design, the UWB RF transceiver and UWB antenna are the key components. Recently, a considerable amount of researches has been devoted to the development of the UWB RF transceiver and antenna for its enabling high data transmission rates and low power consumption. Our book attempts to present current and emerging trends in-research and development of UWB systems as well as future expectations

Realizing uwb antenna array with dual and wide rejection bands using metamaterial and electromagnetic bandgaps techniques

This research article describes a technique for realizing wideband dual notched functionality in an ultra-wideband (UWB) antenna array based on metamaterial and electromagnetic bandgap (EBG) techniques. For comparison purposes, a reference antenna array was initially designed comprising hexagonal patches that are interconnected to each other. The array was fabricated on standard FR-4 substrate with thickness of 0.8 mm. The reference antenna exhibited an average gain of 1.5 dBi across 5.25-10.1 GHz. To improve the array's impedance bandwidth for application in UWB systems metamaterial (MTM) characteristics were applied it. This involved embedding hexagonal slots in patch and shorting the patch to the ground-plane with metallic via. This essentially transformed the antenna to a composite right/left-handed structure that behaved like series left-handed capacitance and shunt left-handed inductance. The proposed MTM antenna array now operated over a much wider frequency range (2-12 GHz) with average gain of 5 dBi. Notched band functionality was incorporated in the proposed array to eliminate unwanted interference signals from other wireless communications systems that coexist inside the UWB spectrum. This was achieved by introducing electromagnetic bandgap in the array by etching circular slots on the ground-plane that are aligned underneath each patch and interconnecting microstrip-line in the array. The proposed techniques had no effect on the dimensions of the antenna array (20 mm x 20 mm x 0.87 mm). The results presented confirm dual-band rejection at the wireless local area network (WLAN) band (5.15-5.825 GHz) and X-band satellite downlink communication band (7.10-7.76 GHz). Compared to other dual notched band designs previously published the footprint of the proposed technique is smaller and its rejection notches completely cover the bandwidth of interfering signals

A Review on Different Techniques of Mutual Coupling Reduction Between Elements of Any MIMO Antenna. Part 2: Metamaterials and Many More

This two‐part article presents a review of different techniques of mutual coupling (MC) reduction. MC reduction is a primary concern while designing a compact multiple‐input‐multiple‐output (MIMO) antenna where the separation between the antennas is less than λ0/2, that is, half of the free‐space wavelength. The negative permittivity and permeability of artificially created materials/structures (Metamaterials) significantly help reduce MC among narrow‐band compact MIMO antenna design elements. In this part two of the review paper, we will discuss techniques: Metamaterials; Split‐Ring‐Resonator; Complementary‐Split‐Ring‐Resonator; Frequency Selective Surface, Metasurface, Electromagnetic Band Gap structure, Decoupling and Matching network, Neutralization line, Cloaking Structures, Shorting vias and pins and few more

Analysis and design of antennas for wireless communications using modal methods

El diseño de antenas para los nuevos sistemas de comunicaciones inalámbricas ha suscitado un creciente interés en los últimos años. El principal objetivo de esta Tesis Doctoral es la propuesta de un método general de diseño de antenas para sistemas de comunicaciones inalámbricas que proporcione una visión física del proceso de diseño. Para alcanzar este objetivo, se propone el uso de un método basado en la descomposición modal de la corriente en la superficie del cuerpo conductor. Los modos tienen la ventaja de proporcionar una visión más física del comportamiento radiante de la antena, así como información muy útil para la optimización de la geometría de la antena y para la selección del mecanismo óptimo de alimentación y su localización. En la Tesis se realizará una revisión de los diferentes métodos modales disponibles, así como de los parámetros más importantes a tratar cuando se trabaja con soluciones modales. Además, se investigará un método para obtener expresiones cerradas para las corrientes superficiales en objetos conductores planos abiertos. Como se verá, los objetos planos con formas canónicas se pueden interpretar en muchas ocasiones como deformaciones de objetos tridimensionales cuyas superficies coinciden con las de algunos de los sistemas de coordenadas curvilíneas. De esta forma, se obtendrán expresiones cerradas para los modos vectoriales en un disco conductor circular y una tira plana infinita. Estas funciones se propondrán como funciones base de dominio completo en problemas más complejos que incluyan este tipo de superficies planas. Los modos de corriente definidos a partir de las funciones de onda vectoriales son de naturaleza compleja, lo que dificulta en ocasiones su uso para el diseño de antenas. Por el contrario, la Teoría de los Modos Característicos proporciona una descomposición de la corriente total en la superficie de un cuerpo conductor de forma arbitraria en un conjunto de modos reales, cuyos diagramas de radiación son ortogonalesAntonino Daviu, E. (2008). Analysis and design of antennas for wireless communications using modal methods [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/2188Palanci

Miniaturised and reconfigurable planar filters for ultra-wideband applications

An increasing demand for electromagnetic spectrum has resulted from the emergence of feature-rich and faster throughputs wireless applications. This necessitates the developments of dynamic reconfigurable or multifunctional systems to better exploit the existing spectrum. Future wireless devices will be expected to communicate over several bands with various other devices in order to fine tune the services they provide to the user. Each band may require a separate RF transceiver and such modern wireless multi-band multi-mode communication systems call for high performance, highly integrated compact modules. Since the Federal Communications Commission (FCC) released the unlicensed frequency band 3.1-10.6 GHz for ultra-wideband (UWB) commercial communications, the development race for commercialising UWB technology has seen a dramatic increase around the world. The aim of this research is to develop reconfigurable planar microwave filters for ultrawideband applications. The project investigates some key design issues of reconfigurable filters, which are being observed constantly in the latest development and realisation of microwave filters. Both analytical and numerical methods are performed to construct a realistic and functional design. Two different types of frequency reconfigurability are investigated in this thesis: discrete (e.g. PIN diode, Optical switch) and continuous (e.g. varactor diode). Using the equivalent circuits and considering the direct coupled filter structure in most cases, several topologies with attractive features are developed for future communication systems. The proposed works may be broadly categorised into three sections as follows. The first section explores a square ring shape close loop resonator along with an opencircuited stub in the symmetry plane. To realise a reconfigurable frequency states within the same spectrum, an innovative approach is developed for this case. An optical or photoconductive switch, comprised of a silicon die activated using near infrared light is investigated as a substitute of PIN diode and performances are evaluated to compare the feasibilities. In addition, a in-band interference rejection technique via externally coupled Tshape resonator is shown. However, it is observed that both structures achieve significant size reductions by utilising the inner part of the resonators. To improve the filter selectivity, a convenient design approach generating a pair of transmission zeros between both passband edges and a single zero in the stop band for harmonic suppression is discussed in the second section. Moreover, the development of notched rejection bands are studied and several novel methods to create a single and multiple notched bands employing the square ring shape structure are proposed. On inspection, it is found that the notch structure can be implemented without deteriorating the filter performances. The discussions are supplemented with detailed design examples which are accompanied by theoretical, simulated and experimental results in order to illustrate the filter development process and showcase practical filter performance. The third section reveals a novel highly compact planar dual-mode resonator with sharp rejections characteristics for UWB applications. A bandwidth reconfiguring technique is demonstrated by splitting its even-mode resonance. Filter structure with the dual-mode resonator is shown to have a relatively wide tuning range, significantly low insertion loss and a constant selectivity along with frequency variations in comparison to similar published works. Finally, the earlier dual-mode structure are modified to realise a dual wideband behaviour. A detail analysis with comprehensive design procedures is outlined and a solution for controlling the frequency bandwidths independently according to the application interest is provided. In line with the previous section, experimental verification is presented to support and supplement the discussions