Design guidelines for spatial modulation

A new class of low-complexity, yet energyefficient Multiple-Input Multiple-Output (MIMO) transmission techniques, namely the family of Spatial Modulation (SM) aided MIMOs (SM-MIMO) has emerged. These systems are capable of exploiting the spatial dimensions (i.e. the antenna indices) as an additional dimension invoked for transmitting information, apart from the traditional Amplitude and Phase Modulation (APM). SM is capable of efficiently operating in diverse MIMO configurations in the context of future communication systems. It constitutes a promising transmission candidate for large-scale MIMO design and for the indoor optical wireless communication whilst relying on a single-Radio Frequency (RF) chain. Moreover, SM may also be viewed as an entirely new hybrid modulation scheme, which is still in its infancy. This paper aims for providing a general survey of the SM design framework as well as of its intrinsic limits. In particular, we focus our attention on the associated transceiver design, on spatial constellation optimization, on link adaptation techniques, on distributed/ cooperative protocol design issues, and on their meritorious variants

Scaling up MIMO: Opportunities and Challenges with Very Large Arrays

This paper surveys recent advances in the area of very large MIMO systems. With very large MIMO, we think of systems that use antenna arrays with an order of magnitude more elements than in systems being built today, say a hundred antennas or more. Very large MIMO entails an unprecedented number of antennas simultaneously serving a much smaller number of terminals. The disparity in number emerges as a desirable operating condition and a practical one as well. The number of terminals that can be simultaneously served is limited, not by the number of antennas, but rather by our inability to acquire channel-state information for an unlimited number of terminals. Larger numbers of terminals can always be accommodated by combining very large MIMO technology with conventional time- and frequency-division multiplexing via OFDM. Very large MIMO arrays is a new research field both in communication theory, propagation, and electronics and represents a paradigm shift in the way of thinking both with regards to theory, systems and implementation. The ultimate vision of very large MIMO systems is that the antenna array would consist of small active antenna units, plugged into an (optical) fieldbus.Comment: Accepted for publication in the IEEE Signal Processing Magazine, October 201

MIMO-UFMC Transceiver Schemes for Millimeter Wave Wireless Communications

The UFMC modulation is among the most considered solutions for the realization of beyond-OFDM air interfaces for future wireless networks. This paper focuses on the design and analysis of an UFMC transceiver equipped with multiple antennas and operating at millimeter wave carrier frequencies. The paper provides the full mathematical model of a MIMO-UFMC transceiver, taking into account the presence of hybrid analog/digital beamformers at both ends of the communication links. Then, several detection structures are proposed, both for the case of single-packet isolated transmission, and for the case of multiple-packet continuous transmission. In the latter situation, the paper also considers the case in which no guard time among adjacent packets is inserted, trading off an increased level of interference with higher values of spectral efficiency. At the analysis stage, the several considered detection structures and transmission schemes are compared in terms of bit-error-rate, root-mean-square-error, and system throughput. The numerical results show that the proposed transceiver algorithms are effective and that the linear MMSE data detector is capable of well managing the increased interference brought by the removal of guard times among consecutive packets, thus yielding throughput gains of about 10 - 13 $\%$. The effect of phase noise at the receiver is also numerically assessed, and it is shown that the recursive implementation of the linear MMSE exhibits some degree of robustness against this disturbance

Spectral Efficiency of MIMO Millimeter-Wave Links with Single-Carrier Modulation for 5G Networks

Future wireless networks will extensively rely upon bandwidths centered on carrier frequencies larger than 10GHz. Indeed, recent research has shown that, despite the large path-loss, millimeter wave (mmWave) frequencies can be successfully exploited to transmit very large data-rates over short distances to slowly moving users. Due to hardware complexity and cost constraints, single-carrier modulation schemes, as opposed to the popular multi-carrier schemes, are being considered for use at mmWave frequencies. This paper presents preliminary studies on the achievable spectral efficiency on a wireless MIMO link operating at mmWave in a typical 5G scenario. Two different single-carrier modem schemes are considered, i.e. a traditional modulation scheme with linear equalization at the receiver, and a single-carrier modulation with cyclic prefix, frequency-domain equalization and FFT-based processing at the receiver. Our results show that the former achieves a larger spectral efficiency than the latter. Results also confirm that the spectral efficiency increases with the dimension of the antenna array, as well as that performance gets severely degraded when the link length exceeds 100 meters and the transmit power falls below 0dBW. Nonetheless, mmWave appear to be very suited for providing very large data-rates over short distances.Comment: 8 pages, 8 figures, to appear in Proc. 20th International ITG Workshop on Smart Antennas (WSA2016

Space-time coding techniques with bit-interleaved coded modulations for MIMO block-fading channels

The space-time bit-interleaved coded modulation (ST-BICM) is an efficient technique to obtain high diversity and coding gain on a block-fading MIMO channel. Its maximum-likelihood (ML) performance is computed under ideal interleaving conditions, which enables a global optimization taking into account channel coding. Thanks to a diversity upperbound derived from the Singleton bound, an appropriate choice of the time dimension of the space-time coding is possible, which maximizes diversity while minimizing complexity. Based on the analysis, an optimized interleaver and a set of linear precoders, called dispersive nucleo algebraic (DNA) precoders are proposed. The proposed precoders have good performance with respect to the state of the art and exist for any number of transmit antennas and any time dimension. With turbo codes, they exhibit a frame error rate which does not increase with frame length.Comment: Submitted to IEEE Trans. on Information Theory, Submission: January 2006 - First review: June 200

Efficient DSP and Circuit Architectures for Massive MIMO: State-of-the-Art and Future Directions

Massive MIMO is a compelling wireless access concept that relies on the use of an excess number of base-station antennas, relative to the number of active terminals. This technology is a main component of 5G New Radio (NR) and addresses all important requirements of future wireless standards: a great capacity increase, the support of many simultaneous users, and improvement in energy efficiency. Massive MIMO requires the simultaneous processing of signals from many antenna chains, and computational operations on large matrices. The complexity of the digital processing has been viewed as a fundamental obstacle to the feasibility of Massive MIMO in the past. Recent advances on system-algorithm-hardware co-design have led to extremely energy-efficient implementations. These exploit opportunities in deeply-scaled silicon technologies and perform partly distributed processing to cope with the bottlenecks encountered in the interconnection of many signals. For example, prototype ASIC implementations have demonstrated zero-forcing precoding in real time at a 55 mW power consumption (20 MHz bandwidth, 128 antennas, multiplexing of 8 terminals). Coarse and even error-prone digital processing in the antenna paths permits a reduction of consumption with a factor of 2 to 5. This article summarizes the fundamental technical contributions to efficient digital signal processing for Massive MIMO. The opportunities and constraints on operating on low-complexity RF and analog hardware chains are clarified. It illustrates how terminals can benefit from improved energy efficiency. The status of technology and real-life prototypes discussed. Open challenges and directions for future research are suggested.Comment: submitted to IEEE transactions on signal processin

Effi cient algorithms for iterative detection and decoding in Multiple-Input and Multiple-Output Communication Systems

This thesis fits into the Multiple-Input Multiple-Output (MIMO) communication systems. Nowadays, these schemes are the most promising technology in the field of wireless communications. The use of this technology allows to increase the rate and the quality of the transmission through the use of multiple antennas at the transmitter and receiver sides. Furthermore, the MIMO technology can also be used in a multiuser scenario, where a Base Station (BS) equipped with several antennas serves several users that share the spatial dimension causing interference. However, employing precoding algorithms the signal of the multiuser interference can be mitigated. For these reasons, the MIMO technology has become an essential key in many new generation communications standards. On the other hand, Massive MIMO technology or Large MIMO, where the BS is equipped with very large number of antennas (hundreds or thousands) serves many users in the same time-frequency resource. Nevertheless, the advantages provided by the MIMO technology entail a substantial increase in the computational cost. Therefore the design of low-complexity receivers is an important issue which is tackled throughout this thesis. To this end, one of the main contributions of this dissertation is the implementation of efficient soft-output detectors and precoding schemes. First, the problem of efficient soft detection with no iteration at the receiver has been addressed. A detailed overview of the most employed soft detectors is provided. Furthermore, the complexity and performance of these methods are evaluated and compared. Additionally, two low-complexity algorithms have been proposed. The first algorithm is based on the efficient Box Optimization Hard Detector (BOHD) algorithm and provides a low-complexity implementation achieving a suitable performance. The second algorithm tries to reduce the computational cost of the Subspace Marginalization with Interference Suppression (SUMIS) algorithm. Second, soft-input soft-output (SISO) detectors, which are included in an iterative receiver structure, have been investigated. An iterative receiver improves the performance with respect to no iteration, achieving a performance close to the channel capacity. In contrast, its computational cost becomes prohibitive. In this context, three algorithms are presented. Two of them achieve max-log performance reducing the complexity of standard SISO detectors. The last one achieves near max-log performance with low complexity. The precoding problem has been addressed in the third part of this thesis. An analysis of some of the most employed precoding techniques has been carried out. The algorithms have been compared in terms of performance and complexity. In this context, the impact of the channel matrix condition number on the performance of the precoders has been analyzed. This impact has been exploited to propose an hybrid precoding scheme that reduces the complexity of the previously proposed precoders. In addition, in Large MIMO systems, an alternative precoder scheme is proposed. In the last part of the thesis, parallel implementations of the SUMIS algorithm are presented. Several strategies for the parallelization of the algorithm are proposed and evaluated on two different platforms: multicore central processing unit (CPU) and graphics processing unit (GPU). The parallel implementations achieve a significant speedup compared to the CPU version. Therefore, these implementations allow to simulate a scalable quasi optimal soft detector in a Large MIMO system much faster than by conventional simuLa presente tesis se enmarca dentro de los sistemas de comunicaciones de múltiples antenas o sistemas MIMO. Hoy en día, estos sistemas presentan una de las tecnologías más prometedoras dentro de los sistemas comunicaciones inalámbricas. A través del uso de múltiples antenas en ambos lados, transmisor y receptor, la tasa de transmisión y la calidad de la misma es aumentada. Por otro lado, la tecnología MIMO puede ser utilizada en un escenario multiusuario, donde una estación base (BS) la cual está equipada con varias antenas, sirve a varios usuarios al mismo tiempo, estos usuarios comparten dimensión espacial causando interferencias multiusuario. Por todas estas razones, la tecnología MIMO ha sido adoptada en muchos de los estándares de comunicaciones de nueva generación. Por otro lado, la tecnología MIMO Masivo, en la cual la estación base está equipada con un gran número de antenas (cientos o miles) que sirve a muchos usuarios en el mismo recurso de tiempo-frecuencia. Sin embargo, las ventajas proporcionadas por los sistemas MIMO implican un aumento en el coste computacional requerido. Por ello, el diseño de receptores de baja complejidad es una cuestión importante en estos sistemas. Para conseguir esta finalidad, las principales contribuciones de la tesis se basan en la implementación de algoritmos de detección soft y esquemas de precodificación eficientes. En primer lugar, el problema de la detección soft eficiente en un sistema receptor sin iteración es abordado. Una descripción detallada sobre los detectores soft más empleados es presentada. Por otro lado, han sido propuestos dos algoritmos de bajo coste. El primer algoritmo está basado en el algoritmo Box Optimization Hard Detector (BOHD) y proporciona una baja complejidad de implementación logrando un buen rendimiento. El segundo de los algoritmos propuestos intenta reducir el coste computacional del conocido algoritmo Subspace Marginalization with Interference Suppression (SUMIS). En segundo lugar, han sido investidados detectores de entrada y salida soft (SISO, soft-input soft-output) los cuales son ejecutados en estructuras de recepción iterativa. El empleo de un receptor iterativo mejora el rendimiento del sistema con respecto a no realizar realimentación, pudiendo lograr la capacidad óptima. Por el contrario, el coste computacional se vuelve prohibitivo. En este contexto, tres algoritmos han sido presentados. Dos de ellos logran un rendimiento óptimo, reduciendo la complejidad de los detectores SISO óptimos que normalmente son empleados. Por el contrario, el otro algoritmo logra un rendimiento casi óptimo a baja complejidad. En la tercera parte, se ha abordado el problema de la precodificación. Se ha llevado a cabo un análisis de algunas de las técnicas de precodificación más usadas. En este contexto, se ha evaluado el impacto que el número de condición de la matriz de canal tiene en el rendimiento de los precodificadores. Además, se ha aprovechado este impacto para proponer un precodificador hibrido. Por otro lado, en MIMO Masivo, se ha propuesto un esquema precodificador. En la última parte de la tesis, la implementación paralela del algoritmo SUMIS es presentada. Varias estrategias sobre la paralelización del algoritmo han sido propuestas y evaluadas en dos plataformas diferentes: Unidad Central de Procesamiento multicore (multicore CPU) y Unidad de Procesamiento Gráfico (GPU). Las implementaciones paralelas consiguen una mejora de speedup. Estas implementaciones permiten simular para MIMO Masivo y de forma más rápida que por simulación convencional, un algoLa present tesi s'emmarca dins dels sistemes de comunicacions de múltiples antenes o sistemes MIMO. Avui dia, aquestos sistemes presenten una de les tecnologies més prometedora dins dels sistemes de comunicacions inalàmbriques. A través de l'ús de múltiples antenes en tots dos costats, transmissor y receptor, es pot augmentar la taxa de transmissió i la qualitat de la mateixa. D'altra banda, la tecnologia MIMO es pot utilitzar en un escenari multiusuari, on una estació base (BS) la qual està equipada amb diverses antenes serveix a diversos usuaris al mateix temps, aquests usuaris comparteixen dimensió espacial causant interferències multiusuari. Per totes aquestes raons, la tecnologia MIMO ha sigut adoptada en molts dels estàndars de comunicacions de nova generació. D'altra banda, la tecnologia MIMO Massiu, en la qual l'estació base està equipada amb un gran nombre d'antenes (centenars o milers) que serveix a molts usuaris en el mateix recurs de temps-freqüència. No obstant això, els avantatges proporcionats pels sistemes MIMO impliquen un augment en el cost computacional requerit. Per això, el disseny de receptors de baixa complexitat és una qüestió important en aquests sistemes. Per tal d'aconseguir esta finalitat, les principals contribucions de la tesi es basen en la implementació d'algoritmes de detecció soft i esquemes de precodificació eficients. En primer lloc, és abordat el problema de la detecció soft eficient en un sistema receptor sense interacció. Una descripció detallada dels detectors soft més emprats és presentada. D'altra banda, han sigut proposats dos algorismes de baix cost. El primer algorisme està basat en l'algorisme Box Optimization Hard Decoder (BOHD) i proporciona una baixa complexitat d'implementació aconseguint un bon resultat. El segon dels algorismes proposats intenta reduir el cost computacional del conegut algoritme Subspace Marginalization with Interference Suppression (SUMIS). En segon lloc, detectors d'entrada i eixidia soft (SISO, soft-input soft-output) els cuals són executats en estructures de recepció iterativa han sigut investigats. L'ocupació d'un receptor iteratiu millora el rendiment del sistema pel que fa a no realitzar realimentació, podent aconseguir la capacitat òptima. Per contra, el cost computacional es torna prohibitiu. En aquest context, tres algorismes han sigut presentats. Dos d'ells aconsegueixen un rendiment òptim, reduint la complexitat dels detectors SISO òptims que normalment són emprats. Per contra, l'altre algorisme aconsegueix un rendiment quasi òptim a baixa complexitat. En la tercera part, s'ha abordat el problema de la precodificació. S'ha dut a terme una anàlisi d'algunes de les tècniques de precodificació més usades, prestant especial atenció al seu rendiment i a la seua complexitat. Dins d'aquest context, l'impacte que el nombre de condició de la matriu de canal té en el rendiment dels precodificadors ha sigut avaluat. A més, aquest impacte ha sigut aprofitat per a proposar un precodificador híbrid , amb la finalitat de reduir la complexitat d'algorismes prèviament proposats. D'altra banda, en MIMO Massiu, un esquema precodificador ha sigut proposat. En l'última part, la implementació paral·lela de l'algorisme SUMIS és presentada. Diverses estratègies sobre la paral·lelizació de l'algorisme han sigut proposades i avaluades en dues plataformes diferents: multicore CPU i GPU. Les implementacions paral·leles aconsegueixen una millora de speedup quan el nombre d'àntenes o l'ordre de la constel·lació incrementen. D'aquesta manera, aquestes implementacions permeten simular per a MIMO Massiu, i de forma més ràpida que la simulació convencional.Simarro Haro, MDLA. (2017). Effi cient algorithms for iterative detection and decoding in Multiple-Input and Multiple-Output Communication Systems [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/86186TESI