Proactive Highly Ambulatory Sensor Routing (PHASeR) protocol for mobile wireless sensor networks

This paper presents a novel multihop routing protocol for mobile wireless sensor networks called PHASeR (Proactive Highly Ambulatory Sensor Routing). The proposed protocol uses a simple hop-count metric to enable the dynamic and robust routing of data towards the sink in mobile environments. It is motivated by the application of radiation mapping by unmanned vehicles, which requires the reliable and timely delivery of regular measurements to the sink. PHASeR maintains a gradient metric in mobile environments by using a global TDMA MAC layer. It also uses the technique of blind forwarding to pass messages through the network in a multipath manner. PHASeR is analysed mathematically based on packet delivery ratio, average packet delay, throughput and overhead. It is then simulated with varying mobility, scalability and traffic loads. The protocol gives good results over all measures, which suggests that it may also be suitable for a wider array of emerging applications

Wireless sensors networks

After studying in depth look at wireless sensor networks are quite clear improvement compared to traditional wireless networks due to several factors as are the durability of the lifetime of the batteries, allowing greater portability of sensor nodes and that can record more events to power stay longer in some places, the routing protocols networks sensors allow gain than in durability also gain in efficiency the avoidance of collisions between packets, which also ensures a lower number of unnecessary network traffic. Because of the great features of such networks are currently using sensor networks in many projects related to different fields such as: environment, health, military, construction and structures, automotive, home automation, agriculture, etc. This type of network currently is leading a technological revolution similar to that had appearance of internet, because the applications appear to be infinite, also speaks global surveillance network on the planet capable of recording and tracking people specific goods and research projects have generated great interest for application in practice

Energy neutral operation of vibration energy-harvesting sensor networks for bridge applications

greatly benefit from the use of wireless sensor networks (WSNs), however energy harvesting for the operation of the network remains a challenge in this setting. While solar and wind power are possible and credible solutions to energy generation, the need for positioning sensor nodes in shaded and sheltered locations, e.g., under a bridge deck, is also often precluding their adoption in real-world deployments. In some scenarios vibration energy harvesting has been shown as an effective solution, instead. This paper presents a multihop vibration energy-harvesting WSN system for bridge applications. The system relies on an ultra-low power wireless sensor node, driven by a novel vibration based energy-harvesting technology. We use a receiver-initiated routing protocol to enable energy-efficient and reliable connectivity between nodes with different energy charging capabilities. By combining real vibration data with an experimentally validated model of the vibration energy harvester, a hardware model, and the COOJA simulator, we develop a framework to conduct realistic and repeatable experiments to evaluate the system before on-site deployment. Simulation results show that the system is able to maintain energy neutral operation, preserving energy with careful management of sleep and communication times. We also validate the system through a laboratory experiment on real hardware against real vibration data collected from a bridge. Besides providing general guidelines and considerations for the development of vibration energy-harvesting systems for bridge applications, this work highlights the limitations of the energy budget made available by traffic-induced vibrations, which clearly shrink the applicability of vibration energy-harvesting technology for WSNs to applications that do not generate an overwhelming amounts of data

Reliable load-balancing routing for resource-constrained wireless sensor networks

Wireless sensor networks (WSNs) are energy and resource constrained. Energy limitations make it advantageous to balance radio transmissions across multiple sensor nodes. Thus, load balanced routing is highly desirable and has motivated a significant volume of research. Multihop sensor network architecture can also provide greater coverage, but requires a highly reliable and adaptive routing scheme to accommodate frequent topology changes. Current reliability-oriented protocols degrade energy efficiency and increase network latency. This thesis develops and evaluates a novel solution to provide energy-efficient routing while enhancing packet delivery reliability. This solution, a reliable load-balancing routing (RLBR), makes four contributions in the area of reliability, resiliency and load balancing in support of the primary objective of network lifetime maximisation. The results are captured using real world testbeds as well as simulations. The first contribution uses sensor node emulation, at the instruction cycle level, to characterise the additional processing and computation overhead required by the routing scheme. The second contribution is based on real world testbeds which comprises two different TinyOS-enabled senor platforms under different scenarios. The third contribution extends and evaluates RLBR using large-scale simulations. It is shown that RLBR consumes less energy while reducing topology repair latency and supports various aggregation weights by redistributing packet relaying loads. It also shows a balanced energy usage and a significant lifetime gain. Finally, the forth contribution is a novel variable transmission power control scheme which is created based on the experience gained from prior practical and simulated studies. This power control scheme operates at the data link layer to dynamically reduce unnecessarily high transmission power while maintaining acceptable link reliability

Wireless Sensor Networks

The aim of this book is to present few important issues of WSNs, from the application, design and technology points of view. The book highlights power efficient design issues related to wireless sensor networks, the existing WSN applications, and discusses the research efforts being undertaken in this field which put the reader in good pace to be able to understand more advanced research and make a contribution in this field for themselves. It is believed that this book serves as a comprehensive reference for graduate and undergraduate senior students who seek to learn latest development in wireless sensor networks

Routing protocol optimization in challenged multihop wireless networks

Durant ces dernières années, de nombreux travaux de recherches ont été menés dans le domaine des réseaux multi-sauts sans fil à contraintes (MWNs: Multihop Wireless Networks). Grâce à l'évolution de la technologie des systèmes mico-electro-méchaniques (MEMS) et, depuis peu, les nanotechnologies, les MWNs sont une solution de choix pour une variété de problèmes. Le principal avantage de ces réseaux est leur faible coût de production qui permet de développer des applications ayant un unique cycle de vie. Cependant, si le coût de fabrication des nœuds constituant ce type de réseaux est assez faible, ces nœuds sont aussi limités en capacité en termes de: rayon de transmission radio, bande passante, puissance de calcul, mémoire, énergie, etc. Ainsi, les applications qui visent l'utilisation des MWNs doivent être conçues avec une grande précaution, et plus spécialement la conception de la fonction de routage, vu que les communications radio constituent la tâche la plus consommatrice d'énergie.Le but de cette thèse est d'analyser les différents défis et contraintes qui régissent la conception d'applications utilisant les MWNs. Ces contraintes se répartissent tout le long de la pile protocolaire. On trouve au niveau application des contraintes comme: la qualité de service, la tolérance aux pannes, le modèle de livraison de données au niveau application, etc. Au niveau réseau, on peut citer les problèmes de la dynamicité de la topologie réseau, la présence de trous, la mobilité, etc. Nos contributions dans cette thèse sont centrées sur l'optimisation de la fonction de routage en considérant les besoins de l'application et les contraintes du réseau. Premièrement, nous avons proposé un protocole de routage multi-chemin "en ligne" pour les applications orientées QoS utilisant des réseaux de capteurs multimédia. Ce protocole repose sur la construction de multiples chemins durant la transmission des paquets vers leur destination, c'est-à-dire sans découverte et construction des routes préalables. En permettant des transmissions parallèles, ce protocole améliore la transmission de bout-en-bout en maximisant la bande passante du chemin agrégé et en minimisant les délais. Ainsi, il permet de répondre aux exigences des applications orientées QoS.Deuxièmement, nous avons traité le problème du routage dans les réseaux mobiles tolérants aux délais. Nous avons commencé par étudier la connectivité intermittente entre les différents et nous avons extrait un modèle pour les contacts dans le but pouvoir prédire les future contacts entre les nœuds. En se basant sur ce modèle, nous avons proposé un protocole de routage, qui met à profit la position géographique des nœuds, leurs trajectoires, et la prédiction des futurs contacts dans le but d'améliorer les décisions de routage. Le protocole proposé permet la réduction des délais de bout-en-bout tout en utilisant d'une manière efficace les ressources limitées des nœuds que ce soit en termes de mémoire (pour le stockage des messages dans les files d'attentes) ou la puissance de calcul (pour l'exécution de l'algorithme de prédiction).Finalement, nous avons proposé un mécanisme de contrôle de la topologie avec un algorithme de routage des paquets pour les applications orientés évènement et qui utilisent des réseaux de capteurs sans fil statiques. Le contrôle de la topologie est réalisé à travers l'utilisation d'un algorithme distribué pour l'ordonnancement du cycle de service (sleep/awake). Les paramètres de l'algorithme proposé peuvent être réglés et ajustés en fonction de la taille du voisinage actif désiré (le nombre moyen de voisin actifs pour chaque nœud). Le mécanisme proposé assure un compromis entre le délai pour la notification d'un événement et la consommation d'énergie globale dans le réseau.Great research efforts have been carried out in the field of challenged multihop wireless networks (MWNs). Thanks to the evolution of the Micro-Electro-Mechanical Systems (MEMS) technology and nanotechnologies, multihop wireless networks have been the solution of choice for a plethora of problems. The main advantage of these networks is their low manufacturing cost that permits one-time application lifecycle. However, if nodes are low-costly to produce, they are also less capable in terms of radio range, bandwidth, processing power, memory, energy, etc. Thus, applications need to be carefully designed and especially the routing task because radio communication is the most energy-consuming functionality and energy is the main issue for challenged multihop wireless networks.The aim of this thesis is to analyse the different challenges that govern the design of challenged multihop wireless networks such as applications challenges in terms of quality of service (QoS), fault-tolerance, data delivery model, etc., but also networking challenges in terms of dynamic network topology, topology voids, etc. Our contributions in this thesis focus on the optimization of routing under different application requirements and network constraints. First, we propose an online multipath routing protocol for QoS-based applications using wireless multimedia sensor networks. The proposed protocol relies on the construction of multiple paths while transmitting data packets to their destination, i.e. without prior topology discovery and path establishment. This protocol achieves parallel transmissions and enhances the end-to-end transmission by maximizing path bandwidth and minimizing the delays, and thus meets the requirements of QoS-based applications. Second, we tackle the problem of routing in mobile delay-tolerant networks by studying the intermittent connectivity of nodes and deriving a contact model in order to forecast future nodes' contacts. Based upon this contact model, we propose a routing protocol that makes use of nodes' locations, nodes' trajectories, and inter-node contact prediction in order to perform forwarding decisions. The proposed routing protocol achieves low end-to-end delays while using efficiently constrained nodes' resources in terms of memory (packet queue occupancy) and processing power (forecasting algorithm). Finally, we present a topology control mechanism along a packet forwarding algorithm for event-driven applications using stationary wireless sensor networks. Topology control is achieved by using a distributed duty-cycle scheduling algorithm. Algorithm parameters can be tuned according to the desired node's awake neighbourhood size. The proposed topology control mechanism ensures trade-off between event-reporting delay and energy consumption.BORDEAUX1-Bib.electronique (335229901) / SudocSudocFranceF

Applications of Repeated Games in Wireless Networks: A Survey

A repeated game is an effective tool to model interactions and conflicts for players aiming to achieve their objectives in a long-term basis. Contrary to static noncooperative games that model an interaction among players in only one period, in repeated games, interactions of players repeat for multiple periods; and thus the players become aware of other players' past behaviors and their future benefits, and will adapt their behavior accordingly. In wireless networks, conflicts among wireless nodes can lead to selfish behaviors, resulting in poor network performances and detrimental individual payoffs. In this paper, we survey the applications of repeated games in different wireless networks. The main goal is to demonstrate the use of repeated games to encourage wireless nodes to cooperate, thereby improving network performances and avoiding network disruption due to selfish behaviors. Furthermore, various problems in wireless networks and variations of repeated game models together with the corresponding solutions are discussed in this survey. Finally, we outline some open issues and future research directions.Comment: 32 pages, 15 figures, 5 tables, 168 reference