Case study based approach to integration of sustainable design analysis, performance and building information modelling

This paper presents a case study based research of both the method and technology for integration of sustainable design analysis (SDA) and building information modelling (BIM) within smart built environments (SBE). Level 3 BIM federation and integration challenges are recognised and improvements suggested, including issues with combining geometry and managing attribute data. The research defines SDA as rapid and quantifiable analysis of diverse sustainable alternatives and ‘what if’ scenarios posed by a design team and client during the early stages of the project, where the benefits of correct decisions can significantly exceed the actual investment required. The SDA concept and BIM integration findings are explained through a convergence from conceptualisation to calculation stages, emphasising the importance of an iterative over a linear approach. The approach allowed for a multitude of “what if” scenarios to be analysed, leading to more informed sustainable solutions at the right stages of the project development, with a generally lower level of detail (LOD) and computational/modelling effort required. In addition, the final stage of Building Regulations Part L compliance calculations was reached with a lot greater level of certainty, in terms of its requirements. Finally, a strategy for long term performance monitoring and evaluation of the building design in terms of its environmental sustainability is presented, via integration between BIM and SBE (Smart Built Environment) technologies

Knowledge society arguments revisited in the semantic technologies era

In the light of high profile governmental and international efforts to realise the knowledge society, I review the arguments made for and against it from a technology standpoint. I focus on advanced knowledge technologies with applications on a large scale and in open- ended environments like the World Wide Web and its ambitious extension, the Semantic Web. I argue for a greater role of social networks in a knowledge society and I explore the recent developments in mechanised trust, knowledge certification, and speculate on their blending with traditional societal institutions. These form the basis of a sketched roadmap for enabling technologies for a knowledge society

IAMS framework: a new framework for acceptable user experiences for integrating physical and virtual identity access management systems

The modern world is populated with so many virtual and physical Identity Access Management Systems (IAMSs) that individuals are required to maintain numerous passwords and login credentials. The tedious task of remembering multiple login credentials can be minimised through the utilisation of an innovative approach of single sign-in mechanisms. During recent times, several systems have been developed to provide physical and virtual identity management systems; however, most have not been very successful. Many of the available systems do not provide the feature of virtual access on mobile devices via the internet; this proves to be a limiting factor in the usage of the systems. Physical spaces, such as offices and government entities, are also favourable places for the deployment of interoperable physical and virtual identity management systems, although this area has only been explored to a minimal level. Alongside increasing the level of awareness for the need to deploy interoperable physical and virtual identity management systems, this paper addresses the immediate need to establish clear standards and guidelines for successful integration of the two medium

Towards an Ontology Metadata Standard

In this poster, we present (i) a proposal for a metadata standard, known as Ontology Metadata Vocabulary (OMV) which is based on discussions in the EU IST thematic network of excellence Knowledge Web1 and (ii) two complementary reference implementations which show the benefit of such a standard in decentralized and centralized scenarios, i.e. the Oyster P2P system and the Onthology metadata portal

Sensory semantic user interfaces (SenSUI)

Rapid evolution of the World Wide Web with its underlying sources of data, knowledge, services and applications continually attempts to support a variety of users, with different backgrounds, requirements and capabilities. In such an environment, it is highly unlikely that a single user interface will prevail and be able to fulfill the requirements of each user adequately. Adaptive user interfaces are able to adapt information and application functionalities to the user context. In contrast, pervasive computing and sensor networks open new opportunities for context aware platforms, one that is able to improve user interface adaptation reacting to environmental and user sensors. Semantic web technologies and ontologies are able to capture sensor data and provide contextual information about the user, their actions, required applications and environment. This paper investigates the viability of an approach where semantic web technologies are used to maximize the efficacy of interface adaptation through the use of available ontology

Conceptual modelling and the quality of ontologies: A comparison between object-role modelling and the object paradigm

Ontologies are key enablers for sharing precise and machine-understandable semantics among different applications and parties. Yet, for ontologies to meet these expectations, their quality must be of a good standard. The quality of an ontology is strongly based on the design method employed. This paper addresses the design problems related to the modelling of ontologies, with specific concentration on the issues related to the quality of the conceptualisations produced. The paper aims to demonstrate the impact of the modelling paradigm adopted on the quality of ontological models and, consequently, the potential impact that such a decision can have in relation to the development of software applications. To this aim, an ontology that is conceptualised based on the Object Role Modelling (ORM) approach is re-engineered into a one modelled on the basis of the Object Paradigm (OP). Next, the two ontologies are analytically compared using the specified criteria. The conducted comparison highlights that using the OP for ontology conceptualisation can provide more expressive, reusable, objective and temporal ontologies than those conceptualised on the basis of the ORM approach

Towards automated knowledge-based mapping between individual conceptualisations to empower personalisation of Geospatial Semantic Web

Geospatial domain is characterised by vagueness, especially in the semantic disambiguation of the concepts in the domain, which makes defining universally accepted geo- ontology an onerous task. This is compounded by the lack of appropriate methods and techniques where the individual semantic conceptualisations can be captured and compared to each other. With multiple user conceptualisations, efforts towards a reliable Geospatial Semantic Web, therefore, require personalisation where user diversity can be incorporated. The work presented in this paper is part of our ongoing research on applying commonsense reasoning to elicit and maintain models that represent users' conceptualisations. Such user models will enable taking into account the users' perspective of the real world and will empower personalisation algorithms for the Semantic Web. Intelligent information processing over the Semantic Web can be achieved if different conceptualisations can be integrated in a semantic environment and mismatches between different conceptualisations can be outlined. In this paper, a formal approach for detecting mismatches between a user's and an expert's conceptual model is outlined. The formalisation is used as the basis to develop algorithms to compare models defined in OWL. The algorithms are illustrated in a geographical domain using concepts from the SPACE ontology developed as part of the SWEET suite of ontologies for the Semantic Web by NASA, and are evaluated by comparing test cases of possible user misconceptions

Digital curation and the cloud

Digital curation involves a wide range of activities, many of which could benefit from cloud deployment to a greater or lesser extent. These range from infrequent, resource-intensive tasks which benefit from the ability to rapidly provision resources to day-to-day collaborative activities which can be facilitated by networked cloud services. Associated benefits are offset by risks such as loss of data or service level, legal and governance incompatibilities and transfer bottlenecks. There is considerable variability across both risks and benefits according to the service and deployment models being adopted and the context in which activities are performed. Some risks, such as legal liabilities, are mitigated by the use of alternative, e.g., private cloud models, but this is typically at the expense of benefits such as resource elasticity and economies of scale. Infrastructure as a Service model may provide a basis on which more specialised software services may be provided. There is considerable work to be done in helping institutions understand the cloud and its associated costs, risks and benefits, and how these compare to their current working methods, in order that the most beneficial uses of cloud technologies may be identified. Specific proposals, echoing recent work coordinated by EPSRC and JISC are the development of advisory, costing and brokering services to facilitate appropriate cloud deployments, the exploration of opportunities for certifying or accrediting cloud preservation providers, and the targeted publicity of outputs from pilot studies to the full range of stakeholders within the curation lifecycle, including data creators and owners, repositories, institutional IT support professionals and senior manager