An algorithm for transistor sizing in CMOS circuits

This paper describes a novel algorithm for automatic transistor sizing which is one technique for improving timing performance in CMOS circuits. The sizing algorithm is used to minimize area and power subject to timing constraints. We define the transistor sizing problem as a graph problem and use a non-linear optimization technique. The algorithm consists of three separate tasks: critical path analysis, transistor sizing and transistor desizing. The main contribution of the presented algorithm is that the delays of all paths in a given design can be tuned simultaneously to satisfy timing constraints. Furthermore, the minimal transistor area and minimal power dissipation under giving timing constraints can be achieved. Experimental results show that this approach has greater control over area/time tradeoffs than traditional sizing algorithms

Loop pipelining with resource and timing constraints

Developing efficient programs for many of the current parallel computers is not easy due to the architectural complexity of those machines. The wide variety of machine organizations often makes it more difficult to port an existing program than to reprogram it completely. Therefore, powerful translators are necessary to generate effective code and free the programmer from concerns about the specific characteristics of the target machine. This work focuses on techniques to be used by an important class of translators, whose objective is to transform sequential programs into equivalent more parallel programs. The transformations are performed at instruction level in order to exploit low level parallelism and increase memory locality.Most of the current applications are programmed in languages which do not allow us to express parallelism between high-level sentences (as Pascal, C or Fortran). Furthermore, a lot of applications written ten or more years ago are still used today, and it is not feasible to rewrite such applications for many reasons (not only technical reasons, but also economic ones). Translators enable programmers to write the application in a familiar sequential programming language, without concerning their selves with the architecture of the target machine. Current compilers for parallel architectures not only translate a program written on a high-level language to the appropriate machine language, but also perform some transformations in the final code in order to execute the program in a more parallel way. The transformations improve the performance in the execution of the program by making use of the knowledge that the compiler has about the machine architecture. The semantics of the program remain intact after any transformation.Experiments show that limiting parallelization to basic blocks not included in loops limits maximum speedup. This is because loops often comprise a large portion of the parallelism available to be exploited in a program. For this reason, a lot of effort has been devoted in the recent years to parallelize loop execution. Several parallel computer architectures and compilation techniques have been proposed to exploit such a parallelism at different granularities. Multiprocessors exploit coarse grained parallelism by distributing entire loop iterations to different processors. Systems oriented to the high-level synthesis (HLS) of VLSI circuits, superscalar processors and very long instruction word (VLIW) processors exploit fine-grained parallelism at instruction level. This work addresses fine-grained parallelization of loops addressed to the HLS of VLSI circuits. Two algorithms are proposed for resource constraints and for timing constraints. An algorithm to reduce the number of registers required to execute a loop in a given architecture is also proposed.Postprint (published version

On Timing Model Extraction and Hierarchical Statistical Timing Analysis

In this paper, we investigate the challenges to apply Statistical Static Timing Analysis (SSTA) in hierarchical design flow, where modules supplied by IP vendors are used to hide design details for IP protection and to reduce the complexity of design and verification. For the three basic circuit types, combinational, flip-flop-based and latch-controlled, we propose methods to extract timing models which contain interfacing as well as compressed internal constraints. Using these compact timing models the runtime of full-chip timing analysis can be reduced, while circuit details from IP vendors are not exposed. We also propose a method to reconstruct the correlation between modules during full-chip timing analysis. This correlation can not be incorporated into timing models because it depends on the layout of the corresponding modules in the chip. In addition, we investigate how to apply the extracted timing models with the reconstructed correlation to evaluate the performance of the complete design. Experiments demonstrate that using the extracted timing models and reconstructed correlation full-chip timing analysis can be several times faster than applying the flattened circuit directly, while the accuracy of statistical timing analysis is still well maintained

G4LTL-ST: Automatic Generation of PLC Programs

G4LTL-ST automatically synthesizes control code for industrial Programmable Logic Controls (PLC) from timed behavioral specifications of input-output signals. These specifications are expressed in a linear temporal logic (LTL) extended with non-linear arithmetic constraints and timing constraints on signals. G4LTL-ST generates code in IEC 61131-3-compatible Structured Text, which is compiled into executable code for a large number of industrial field-level devices. The synthesis algorithm of G4LTL-ST implements pseudo-Boolean abstraction of data constraints and the compilation of timing constraints into LTL, together with a counterstrategy-guided abstraction refinement synthesis loop. Since temporal logic specifications are notoriously difficult to use in practice, G4LTL-ST supports engineers in specifying realizable control problems by suggesting suitable restrictions on the behavior of the control environment from failed synthesis attempts.Comment: This is the full version of the CAV'14 paper. Research concepts developed this paper are mainly from the technical report "Numerical LTL synthesis for cyber-physical systems", coauthored by Chih-Hong Cheng (ABB Research) and Edward A. Lee (UC Berkeley