477 research outputs found
A model for calculating EM field in layered medium with application to biological implants
This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University.Modern wireless telecommunication devices (GSM Mobile system) (cellular telephones and wireless modems on laptop computers) have the potential to interfere with implantable medical devices/prostheses and cause possible malfunction. An implant of resonant dimensions within a homogeneous dielectric lossy sphere can enhance local values of SAR (the specific absorption rate). Also antenna radiation pattern and other characteristics are significantly altered by the presence of the composite dielectric entities such as the human body. Besides, the current safety limits do not take into account the possible effect of hot spots arising from metallic implants resonant at mobile phone frequencies. Although considerable attention has been given to study and measurement of scattering from a dielectric sphere, no rigorous treatment using electromagnetic theory has been given to the implanted dielectric spherical head/cylindrical body.
This thesis aims to deal with the scattering of a plane electromagnetic wave from a perfectly conducting or dielectric spherical/cylindrical implant of electrically small radius (of resonant length), embedded eccentrically into a dielectric spherical head model. The method of dyadic Green's function (DGF) for spherical vector wave functions is used. Analytical expressions for the scattered fields of both cylindrical and spherical implants as well as layered spherical head and cylindrical torso models are obtained separately in different chapters. The whole structure is assumed to be uniform along the propagation direction.
To further check the accuracy of the proposed solution, the numerical results from the analytical expressions computed for the problem of implanted head/body are compared with the numerical results from the Finite-Difference Time-Domain (FDTD) method using the EMU-FDTD Electromagnetic simulator. Good agreement is observed between the numerical results based on the proposed method and the FDTD numerical technique.
This research presents a new approach, away from simulation work, to the study of exact computation of EM fields in biological systems. Its salient characteristics are its simplicity, the saving in memory and CPU computational time and speed.Cochlear UK Limited and EPSR
Modeling EMI Resulting from a Signal Via Transition Through Power/Ground Layers
Signal transitioning through layers on vias are very common in multi-layer printed circuit board (PCB) design. For a signal via transitioning through the internal power and ground planes, the return current must switch from one reference plane to another reference plane. The discontinuity of the return current at the via excites the power and ground planes, and results in noise on the power bus that can lead to signal integrity, as well as EMI problems. Numerical methods, such as the finite-difference time-domain (FDTD), Moment of Methods (MoM), and partial element equivalent circuit (PEEC) method, were employed herein to study this problem. The modeled results are supported by measurements. In addition, a common EMI mitigation approach of adding a decoupling capacitor was investigated with the FDTD method
The physics of negative refraction and transformation optics
Whilst optics is one of the oldest field in science, there are still aspects of electromagnetism
that we are only beginning to uncover. For instance, it was demonstrated
that materials with simultaneously negative permittivity and permeability exhibit
certain exotic behavior; where familiar physical phenomena, such as refraction, are
reversed. As such, these materials came to be known as negative refractive index
materials (NRIM) and their collective properties as negative refraction. One of the
most important and remarkable property of NRIM is perfect lensing - the ability to
transport both supra and sub-wavelength optical information from one surface (object
plane) to another (image plane), forming images with unprecedented resolution,
beyond the diffraction limit. Perfect lensing itself is a consequence of deeper symmetries
in electromagnetism, encapsulated in the language of transformation optics
- with which we have both a descriptive tool to unify diverse electromagnetic configuarations,
as well as a prescriptive tool to design media which bends light at will.
While, such transformation medium and NRIM have been demonstrably realised
using metamaterials, several challenges remain, of which loss is the major challenge.
It is therefore under this trinity of concepts: metamaterials, negative refraction
and transformation optics that this thesis is presented. In particular, this thesis
illustrates the convergence of the later two concepts, giving rise to a novel class
of perfect lens - the compact perfect lens. Here, we shall investigate, their unique
properties, construction, challenges, and the dynamics of these lenses. In particular
the formulation to study dynamics and effects of losses, is universal; applicable to
lenses of any geometry. Finally we shall also propose an alternative universal, top-down
approach to overcome losses in perfect lenses using phase conjugation, and
demonstrate the capacity of such lenses to see through lossy, translucent obstacles
Optimizing the Plasmonic Enhancement of Light in Metallic Nanogap Structures for Surface-Enhanced Raman Spectroscopy
Technology based on the interaction between light and matter has entered something of a renaissance over the past few decades due to improved control over the creation of nanoscale patterns. Tunable nanofabrication has benefitted optical sensing, by which light is used to detect the presence or quantity of various substances. Through methods such as Raman spectroscopy, the optical spectra of solid, liquid, or gaseous samples act as fingerprints which help identify a single type of molecule amongst a background of potentially many other chemicals. This technique therefore offers great benefit to applications such as biomedical sensors, airport security, industrial waste management, water treatment, art/jewelry validation, and more. The primary setback of such techniques has been the difficulty of signal measurement, especially when the detected molecules are very sparse within a surrounding material, such as trace levels of a harmful chemical in a gas or liquid sample.
The ability to enhance light signals from such samples is key to developing affordable solutions to bring this type of optical sensing from being a research lab tool to an every-day technology. It has been found that local electric fields increase significantly by incorporating nanostructures onto surfaces containing the detected substances, thus increasing the signal strength measured at the detector. Using specially engineered metal nanostructures and their plasmonic resonance properties, signals such as Raman scattering from particles of interest can be enhanced to much more useable detection limits. This dissertation work employs two nanofabrication methods to engineer light enhancement to understand and improve real surface-enhanced Raman spectroscopy substrates that can predictably boost the identifying signals measured for probe molecules.
A lithography-based technique and a self-assembly process were studied for producing plasmonic nanostructures with at least one tunable geometrical parameter. These variable nanoscale features were the tuning knobs used during design engineering of optimal light enhancement through computational physics studies. Experimental enhanced Raman spectra were measured using plasmonic metasurfaces, with the signal enhancement found to corroborate theoretical calculations. The results demonstrated the effectiveness of the tunable devices as surface-enhanced sensing devices worthy of further development and study
Simulation and analysis of airborne antenna radiation patterns
The objective is to develop an accurate and efficient analytic solution for predicting high frequency radiation patterns of fuselage-mounted airborne antennas. This is an analytic study of airborne antenna patterns using the Uniform Geometrical Theory of Diffraction (UTD). The aircraft is modeled in its most basic form so that the solution is applicable to general-type aircraft. The fuselage is modeled as a perfectly conducting composite ellipsoid; whereas, the wings, stabilizers, nose, fuel tanks, and engines, are simulated as perfectly conducting flat plates that can be attached to the fuselage and/or to each other. The composite-ellipsoid fuselage model is necessary to successfully simulate the wide variety of real world fuselage shapes. Since the antenna is mounted on the fuselage, it has a dominant effect on the resulting radiation pattern so it must be simulated accurately, especially near the antenna. Various radiation patterns are calculated for commercial, private, and military aircraft, and the Space Shuttle Orbiter. The application of this solution to numerous practical airborne antenna problems illustrates its versatility and design capability. In most cases, the solution accuracy is verified by the comparisons between the calculated and measured data
Large Area Conformal Infrared Frequency Selective Surfaces
Frequency selective surfaces (FSS) were originally developed for electromagnetic filtering applications at microwave frequencies. Electron-beam lithography has enabled the extension of FSS to infrared frequencies; however, these techniques create sample sizes that are seldom appropriate for real world applications due to the size and rigidity of the substrate. A new method of fabricating large area conformal infrared FSS is introduced, which involves releasing miniature FSS arrays from a substrate for implementation in a coating. A selective etching process is proposed and executed to create FSS particles from crossed-dipole and square-loop FSS arrays. When the fill-factor of the particles in the measurement area is accounted for, the spectral properties of the FSS flakes are similar to the full array from which they were created. As a step toward scalability of the process, a square-patch design is presented and formed into FSS flakes with geometry within the capability of ultraviolet optical lithography. Square-loop infrared FSS designs are investigated both in quasi-infinite arrays and in truncated sub-arrays. First, scattering-scanning near-field optical microscopy (s-SNOM) is introduced as a characterization method for square-loop arrays, and the near-field amplitude and phase results are discussed in terms of the resonant behavior observed in far-field measurements. Since the creation of FSS particles toward a large area coating inherently truncates the arrays, array truncation effects are investigated for square-loop arrays both in the near- and far-field. As an extension of the truncation study, small geometric changes in the design of square-loop arrays are introduced as a method to tune the resonant far-field wavelength back to that of the quasi-infinite arrays
Stochastic Models of Surface Limited Electronic and Heat Transport in Metal and Semiconductor Contacts, Wires, and Sheets — Micro to Nano
We introduce novel statistical simulation approaches to include the e ect of
surface roughness in coupled mechanical, electronic and thermal processes
in N/MEMS and semiconductor devices in the 10 nm - 1 m range. A model
is presented to estimate roughness rms and autocorrelation L from experimental
surfaces and edges, and subsequently generate statistical series
of rough geometrical devices from these observable parameters. Using such
series of rough electrodes under Holm's theory, we present a novel simulation
framework which predicts a contact resistance of 80 m
in MEMS
gold-gold micro-contacts, for applied pressures above 0.3 mN on 1 m 1
m surfaces. The non-contacting state of such devices is simulated through
statistical Monte Carlo iterations on percolative networks to derive a time
to electro-thermal failure through electrical discharges in the gas insulating
metal electrodes. The observable parameters L and are further integrated
in semi-classical solutions to the electronic and thermal Boltzman transport
equation (BTE), and we show roughness limited heat and electronic transport
in rough semiconductor nanowires and nano-ribbons. In this scope, we
model for the rst time electrostatically con ned nanowires, where a reduction
of electron - surface scattering leads to enhanced mobility in comparison
to geometrical nanowires. In addition, we show extremely low thermal conductivity
in Si, GaAs, and Ge nanowires down to 0.1 W/m/K for thin Ge
wires with 56 nm width and = 3 nm. The dependency of thermal conductivity
in (D= )2 leads to possible application in the eld of thermoelectric
devices. For rough channels of width below 10 nm, electronic transport is
additionally modeled using a novel non-parabolic 3D recursive Green function
scheme, leading to an estimation of reduced electronic transmission in
rough semiconductor wires based on the quantum nature of charge carriers.
Electronic and thermal simulation schemes are nally extended to such 2D
semiconductor materials as graphene, where low thermal conductivity is approximated
below 1000 W/m/K for rough suspended graphene ribbons in
accordance with recent experiments
From Photons to Atoms - The Electromagnetic Nature of Matter
Motivated by a revision of the classical equations of electromagnetism that
allow for the inclusion of solitary waves in the solution space, the material
collected in these notes examines the consequences of adopting the modified
model in the description of atomic structures. The possibility of handling
"photons" in a deterministic way opens indeed a chance for reviewing the
foundations of quantum physics. Atoms and molecules are described as
aggregations of nuclei and electrons joined through organized photon layers
resonating at various frequencies, explaining how matter can absorb or emit
light quanta. Some established viewpoints are subverted, offering an
alternative scenario. The analysis seeks to provide an answer to many technical
problems in physical chemistry and, at the same time, to raise epistemological
questions.Comment: The earlier version contains a number of flaws and typos. A
throughout revision is neede
Recommended from our members
Annual report 2006 // Institute of Safety Research
[no abstract available
Recommended from our members
Annual report 2006 // Institute of Safety Research
[no abstract available
- …