2,574 research outputs found

    Network emulation focusing on QoS-Oriented satellite communication

    Get PDF
    This chapter proposes network emulation basics and a complete case study of QoS-oriented Satellite Communication

    A high speed Tri-Vision system for automotive applications

    Get PDF
    Purpose: Cameras are excellent ways of non-invasively monitoring the interior and exterior of vehicles. In particular, high speed stereovision and multivision systems are important for transport applications such as driver eye tracking or collision avoidance. This paper addresses the synchronisation problem which arises when multivision camera systems are used to capture the high speed motion common in such applications. Methods: An experimental, high-speed tri-vision camera system intended for real-time driver eye-blink and saccade measurement was designed, developed, implemented and tested using prototype, ultra-high dynamic range, automotive-grade image sensors specifically developed by E2V (formerly Atmel) Grenoble SA as part of the European FP6 project – sensation (advanced sensor development for attention stress, vigilance and sleep/wakefulness monitoring). Results : The developed system can sustain frame rates of 59.8 Hz at the full stereovision resolution of 1280 × 480 but this can reach 750 Hz when a 10 k pixel Region of Interest (ROI) is used, with a maximum global shutter speed of 1/48000 s and a shutter efficiency of 99.7%. The data can be reliably transmitted uncompressed over standard copper Camera-Link® cables over 5 metres. The synchronisation error between the left and right stereo images is less than 100 ps and this has been verified both electrically and optically. Synchronisation is automatically established at boot-up and maintained during resolution changes. A third camera in the set can be configured independently. The dynamic range of the 10bit sensors exceeds 123 dB with a spectral sensitivity extending well into the infra-red range. Conclusion: The system was subjected to a comprehensive testing protocol, which confirms that the salient requirements for the driver monitoring application are adequately met and in some respects, exceeded. The synchronisation technique presented may also benefit several other automotive stereovision applications including near and far-field obstacle detection and collision avoidance, road condition monitoring and others.Partially funded by the EU FP6 through the IST-507231 SENSATION project.peer-reviewe

    EVALUATING THE CYBER SECURITY IN THE INTERNET OF THINGS: SMART HOME VULNERABILITIES

    Get PDF
    The need for advanced cyber security measures and strategies is attributed to modern sophistication of cyber-attacks and intense media attention when attacks and breaches occur. In May 2014, a congressional report suggested that Americans used approximately 500 million Internet-capable devices at home, including, but not limited to Smartphones, tablets, and other Internet-connected devices, which run various unimpeded applications. Owing to this high level of connectivity, our home environment is not immune to the cyber-attack paradigm; rather, the home has evolved to become one of the most influenced markets where the Internet of Things has had extensive surfaces, vectors for attacks, and unanswered security concerns. Thus, the aim of the present research was to investigate behavioral heuristics of the Internet of Things by adopting an exploratory multiple case study approach. A controlled Internet of Things ecosystem was constructed consisting of real-life data observed during a typical life cycle of initial configuration and average use. The information obtained during the course of this study involved the systematic acquisition and analysis of Smart Home ecosystem link-layer protocol data units (PDUs). The methodology employed during this study involved a recursive multiple case study evaluation of the Smart Home ecosystem data-link layer PDUs and aligned the case studies to the existing Intrusion Kill Chain design model. The proposed solution emerging from the case studies builds the appropriate data collection template while concurrently developing a Security as a Service (SECaaS) capability to evaluate collected results

    TechNews digests: Jan - Nov 2009

    Get PDF
    TechNews is a technology, news and analysis service aimed at anyone in the education sector keen to stay informed about technology developments, trends and issues. TechNews focuses on emerging technologies and other technology news. TechNews service : digests september 2004 till May 2010 Analysis pieces and News combined publish every 2 to 3 month

    A Framework for Controlling Quality of Sessions in Multimedia Systems

    Get PDF
    Collaborative multimedia systems demand overall session quality control beyond the level of quality of service (QoS) pertaining to individual connections in isolation of others. At every instant in time, the quality of the session depends on the actual QoS offered by the system to each of the application streams, as well as on the relative priorities of these streams according to the application semantics. We introduce a framework for achieving QoSess control and address the architectural issues involved in designing a QoSess control laver that realizes the proposed framework. In addition, we detail our contributions for two main components of the QoSess control layer. The first component is a scalable and robust feedback protocol, which allows for determining the worst case state among a group of receivers of a stream. This mechanism is used for controlling the transmission rates of multimedia sources in both cases of layered and single-rate multicast streams. The second component is a set of inter-stream adaptation algorithms that dynamically control the bandwidth shares of the streams belonging to a session. Additionally, in order to ensure stability and responsiveness in the inter-stream adaptation process, several measures are taken, including devising a domain rate control protocol. The performance of the proposed mechanisms is analyzed and their advantages are demonstrated by simulation and experimental results

    Voice over IP

    Get PDF
    The area that this thesis covers is Voice over IP (or IP Telephony as it is sometimes called) over Private networks and not over the Internet. There is a distinction to be made between the two even though the term is loosely applied to both. IP Telephony over Private Networks involve calls made over private WANs using IP telephony protocols while IP Telephony over the Internet involve calls made over the public Internet using IP telephony protocols. Since the network is private, service is reliable because the network owner can control how resources are allocated to various applications, such as telephony services. The public Internet on the other hand is a public, largely unmanaged network that offers no reliable service guarantee. Calls placed over the Internet can be low in quality, but given the low price, some find this solution attractive. What started off as an Internet Revolution with free phone calls being offered to the general public using their multimedia computers has turned into a telecommunication revolution where enterprises are beginning to converge their data and voice networks into one network. In retrospect, an enterprise\u27s data networks are being leveraged for telephony. The communication industry has come full circle. Earlier in the decade data was being transmitted over the public voice networks and now voice is just another application which is/will be run over the enterprises existing data networks. We shall see in this thesis the problems that are encountered while sending Voice over Data networks using the underlying IP Protocol and the corrective steps taken by the Industry to resolve these multitudes of issues. Paul M. Zam who is collaborating in this Joint Thesis/project on VoIP will substantiate this theoretical research with his practical findings. On reading this paper the reader will gain an insight in the issues revolving the implementation of VoIP in an enterprises private network as well the technical data, which sheds more light on the same. Thus the premise of this joint thesis/project is to analyze the current status of the technology and present a business case scenario where an organization will be able to use this information

    Congestion Control for Network-Aware Telehaptic Communication

    Full text link
    Telehaptic applications involve delay-sensitive multimedia communication between remote locations with distinct Quality of Service (QoS) requirements for different media components. These QoS constraints pose a variety of challenges, especially when the communication occurs over a shared network, with unknown and time-varying cross-traffic. In this work, we propose a transport layer congestion control protocol for telehaptic applications operating over shared networks, termed as dynamic packetization module (DPM). DPM is a lossless, network-aware protocol which tunes the telehaptic packetization rate based on the level of congestion in the network. To monitor the network congestion, we devise a novel network feedback module, which communicates the end-to-end delays encountered by the telehaptic packets to the respective transmitters with negligible overhead. Via extensive simulations, we show that DPM meets the QoS requirements of telehaptic applications over a wide range of network cross-traffic conditions. We also report qualitative results of a real-time telepottery experiment with several human subjects, which reveal that DPM preserves the quality of telehaptic activity even under heavily congested network scenarios. Finally, we compare the performance of DPM with several previously proposed telehaptic communication protocols and demonstrate that DPM outperforms these protocols.Comment: 25 pages, 19 figure

    Bandwidth management and quality of service

    Get PDF
    With the advent of bandwidth-hungry video and audio applications, demand for bandwidth is expected to exceed supply. Users will require more bandwidth and, as always, there are likely to be more users. As the Internet user base becomes more diverse, there is an increasing perception that Internet Service Providers (ISPs) should be able to differentiate between users, so that the specific needs of different types of users can be met. Differentiated services is seen as a possible solution to the bandwidth problem. Currently, however, the technology used on the Internet differentiates neither between users, nor between applications. The thesis focuses on current and anticipated bandwidth shortages on the Internet, and on the lack of a differentiated service. The aim is to identify methods of managing bandwidth and to investigate how these bandwidth management methods can be used to provide a differentiated service. The scope of the study is limited to networks using both Ethernet technology and the Internet Protocol (IP). Tile study is significant because it addresses current problems confronted by network managers. The key terms, Quality of Service (QoS) and bandwidth management, are defined. “QoS” is equated to a differentiating system. Bandwidth management is defined as any method of controlling and allocating bandwidth. Installing more capacity is taken to be a method of bandwidth management. The review of literature concentrates on Ethernet/IP networks. It begins with a detailed examination of definitions and interpretations of the term Quality of Service and shows how the meaning changed over the last decade. The review then examines congestion control, including a survey of queuing methods. Priority queuing implemented in hardware is examined in detail, followed by a review of the ReSource reserVation Protocol (RSVP) and a new version of IP (lPv6). Finally, the new standards IEEE 802.1p and IEEE 802.1Q are outlined, and parts of ISO/IEC 15802-3 are analysed. The Integrated Services Architecture (ISA), Differentiated Services (DiffServ) and MultiProtocol Label Switching (MPLS) are seen as providing a theoretical framework for QoS development. The Open Systems Interconnection Reference Model (OSI model) is chosen as the preferred framework for investigating bandwidth management because it is more comprehensive than the alternative US Department of Defence Model (DoD model). A case study of the Edith Cowan University (ECU) data network illustrates current practice in network management. It provides concrete examples of some of the problems, methods and solutions identified in the literary review. Bandwidth management methods are identified and categorised based on the OSI layers in which they operate. Suggestions are given as to how some of these bandwidth management methods are, or can be used within current QoS architectures. The experimental work consists of two series of tests on small, experimental LANs. The tests are aimed at evaluating the effectiveness of IEEE 802.1 p prioritisation. The results suggest that in small Local Area Networks (LANs) prioritisation provides no benefit when Ethernet switches are lightly loaded

    Delivering video services over IP networks

    Get PDF
    The main goal pursued in this Thesis is to contribute towards the design and development of an end-to-end solution/system that would assist in reliable, consistence, less packet-loss delivery of high-quality video signals of pre-recorded presentations, training lectures, live events such as seminars over standard IP networks. This Thesis will focus on the existing Internet Service Provider, Oman Telecommunications Company (Omantel) and its best delivery of high-bandwidth data such as video to its Local and regional offices and departments over IP networks. This video-over-IP system aims to accumulate the technical scientific knowledge required to be able to offer high-quality video, which is fully scalable over IP networks. It aims to convert this knowledge into experimental prototypes, which, after the Thesis, can be developed into an integrated generic environment for Video-over-IP service development and content production. The objective is to initially define the functionality of content Services that can be incorporated into the operations of Oman telecommunications company networks. Then define the functional characteristics and system requirements necessary for the deployment of content streaming services over Omantel IP based networks. The design of this system would be combined with streaming high-quality video, while maintaining scalability and bandwidth efficiencies required for large-scale enterprise deployment. The design would encompass various components that are needed to capture, store and deliver streaming video to desktops. It will investigate on what is required to deliver quality video over Omantel IP networks and will recommend the actual products and solutions for achieving the end result
    corecore