Terminal Orientation in OFDM-based LiFi Systems

Light-fidelity (LiFi) is a wireless communication technology that employs both infrared and visible light spectra to support multiuser access and user mobility. Considering the small wavelength of light, the optical channel is affected by the random orientation of a user equipment (UE). In this paper, a random process model for changes in the UE orientation is proposed based on data measurements. We show that the coherence time of the random orientation is in the order of hundreds of milliseconds. Therefore, an indoor optical wireless channel can be treated as a slowly-varying channel as its delay spread is typically in the order of nanoseconds. A study of the orientation model on the performance of direct-current-biased orthogonal frequency-division multiplexing (DC-OFDM) is also presented. The performance analysis of the DC-OFDM system incorporates the effect of diffuse link due to reflection and blockage by the user. The results show that the diffuse link and the blockage have significant effects, especially if the UE is located relatively far away from an access point (AP). It is shown that the effect is notable if the horizontal distance between the UE and the AP is greater than $1.5$ m in a typical $5\times3.5\times3$ m$^3$ indoor room.Comment: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessibl

Light-Fidelity as Next Generation Network Technology: A Bibliometric Survey and Analysis

This paper delivers a systematic review and a bibliometric survey analysis of Light-Fidelity (Li-Fi) indoor implementation in Next Generation Network (NGN). The main objective of this study is to design a communication network based on NGN-Li-Fi for the indoor implementation which aims to increase user Quality of Service (QoS). The main merits and contributions of this study are the thorough and detailed analysis of the review, both in literature surveys and bibliometric analysis, as well as the discussion of the implementation model challenges of Li-Fi in both indoor and outdoor environments. The issue articulated in an indoor communication network is the possibility of intermittent connectivity due to barriers caused by line-of-sight (LOS) between the LED transmitter and receiver, handover due to channel overlap, and other network reliability issues. To realize the full potential and significant benefits of the Next Generation Network, challenges in indoor communication such as load-balancing and anticipating network congestion (traffic congestion) must be addressed. The main benefit of this study is the in-depth investigation of surveys in both selected critical literatures and bibliometric approach. This study seeks to comprehend the implications of Next Generation networks for indoor communication networks, particularly for visible light communication channels

PAPR reduction in multicarrier modulation techniques based visible light communication systems

Visible light communication (VLC) is an optical wireless communication (OWC) technology that has the potential to provide high data rate transmission for indoor applications. VLC is a promising alternative technology with a large and unlicensed spectrum to complement the congested radio frequency (RF) based communication in order to meet the exponential growth and popularity of smart devices, data intensive services and applications. The use of low-cost commercially available front-end devices further highlights the attraction of VLC system. However, nonlinear dynamic range of front-end devices and optical channel impairments limit full exploitation of VLC available modulation bandwidth. To fully benefit from the inherent resources and mitigate these limitations, multicarrier modulation (MCM) techniques are adopted. However, these techniques are affected by high peak-to-average power ratio (PAPR) which imposes constraints on the limited dynamic range of the front-end devices and the average radiated optical power. The main focus throughout this thesis is to reduce the high PAPR of MCM modulation techniques-based VLC system by implementing pilot-assisted (PA) technique. Additionally, performance of PAPR reduced modulation techniques is investigated through analytical, simulation, and experimentally. This thesis first presents background of VLC system principles including the front-end devices, VLC channel, system impairments and challenges, and employed solutions. The principles, limitations, and performance of MCM modulation variants that are implemented in this work are presented. Moreover, principles of PAPR challenge in MCM based VLC, PAPR evaluation, impact on the transmitted signal as well as the existing PAPR reduction techniques are discussed. Looking at the gap, a PA is implemented as PAPR reduction technique which is presented in this work including its implementation and performance. Following that, multiple experimental studies on PAPR reduction of PA technique are presented. Two experimental demonstrations on the efficacy of PA PAPR reduction for PAM-DMT and DCO-OFDM based VLC using a single blue LED are presented. These studies are comparing the bit-error-rate (BER) performance of the proposed systems with conventional counterparts over a range of sampling rate. This shows that, the proposed systems perform better than conventional systems without PAPR reduction. The results are validated through simulation. Other two experimental studies on the previous systems with parameters optimisation and available modulation bandwidth utilisation are presented, which show that the proposed systems outperform the conventional systems in terms of BER. This is followed by investigating the PA PAPR reduction effect on the achievable data rate of a wavelength division multiplexing (WDM) based VLC system using three different LEDs for PAPR reduced DCO-OFDM and PAM-DMT systems. The proposed systems have achieved more than 8% data rate higher than that of conventional systems without BER performance degradation. Finally, analytical investigation of clipping noise that leads to distortion in a VLC system due to front-end devices limitations is presented. To mitigate the clipping noise, PAPR of the system is reduced by the PA technique. The analytical BER performance of the system with PAPR reduction is verified through simulation and then compared to that of the conventional system without PAPR reduction at similar clipping levels. The PA proposed system shows better BER performance at all clipping levels