1,675 research outputs found
A Survey of Techniques For Improving Energy Efficiency in Embedded Computing Systems
Recent technological advances have greatly improved the performance and
features of embedded systems. With the number of just mobile devices now
reaching nearly equal to the population of earth, embedded systems have truly
become ubiquitous. These trends, however, have also made the task of managing
their power consumption extremely challenging. In recent years, several
techniques have been proposed to address this issue. In this paper, we survey
the techniques for managing power consumption of embedded systems. We discuss
the need of power management and provide a classification of the techniques on
several important parameters to highlight their similarities and differences.
This paper is intended to help the researchers and application-developers in
gaining insights into the working of power management techniques and designing
even more efficient high-performance embedded systems of tomorrow
3D Stacked Cache Data Management for Energy Minimization of 3D Chip Multiprocessor
In this model a runtime cache data mapping is discussed for 3-D stacked L2 caches to minimize the overall energy of 3-D chip multiprocessors (CMPs). The suggested method considers both temperature distribution and memory traffic of 3-D CMPs. Experimental result shows energy reduction achieving up to 22.88% compared to an existing solution which considers only the temperature distribution. New tendencies envisage 3D Multi-Processor System-On-Chip (MPSoC) design as a promising solution to keep increasing the performance of the next-generation high performance computing (HPC) systems. However, as the power density of HPC systems increases with the arrival of 3D MPSoCs with energy reduction achieving up to 19.55% by supplying electrical power to the computing equipment and constantly removing the generated heat is rapidly becoming the dominant cost in any HPC facility
An Experimental Study of Reduced-Voltage Operation in Modern FPGAs for Neural Network Acceleration
We empirically evaluate an undervolting technique, i.e., underscaling the
circuit supply voltage below the nominal level, to improve the power-efficiency
of Convolutional Neural Network (CNN) accelerators mapped to Field Programmable
Gate Arrays (FPGAs). Undervolting below a safe voltage level can lead to timing
faults due to excessive circuit latency increase. We evaluate the
reliability-power trade-off for such accelerators. Specifically, we
experimentally study the reduced-voltage operation of multiple components of
real FPGAs, characterize the corresponding reliability behavior of CNN
accelerators, propose techniques to minimize the drawbacks of reduced-voltage
operation, and combine undervolting with architectural CNN optimization
techniques, i.e., quantization and pruning. We investigate the effect of
environmental temperature on the reliability-power trade-off of such
accelerators. We perform experiments on three identical samples of modern
Xilinx ZCU102 FPGA platforms with five state-of-the-art image classification
CNN benchmarks. This approach allows us to study the effects of our
undervolting technique for both software and hardware variability. We achieve
more than 3X power-efficiency (GOPs/W) gain via undervolting. 2.6X of this gain
is the result of eliminating the voltage guardband region, i.e., the safe
voltage region below the nominal level that is set by FPGA vendor to ensure
correct functionality in worst-case environmental and circuit conditions. 43%
of the power-efficiency gain is due to further undervolting below the
guardband, which comes at the cost of accuracy loss in the CNN accelerator. We
evaluate an effective frequency underscaling technique that prevents this
accuracy loss, and find that it reduces the power-efficiency gain from 43% to
25%.Comment: To appear at the DSN 2020 conferenc
Multi-criteria optimization for energy-efficient multi-core systems-on-chip
The steady down-scaling of transistor dimensions has made possible the evolutionary progress leading to today’s high-performance multi-GHz microprocessors and core based System-on-Chip (SoC) that offer superior performance, dramatically reduced cost per function, and much-reduced physical size compared to their predecessors. On the negative side, this rapid scaling however also translates to high power densities, higher operating temperatures and reduced reliability making it imperative to address design issues that have cropped up in its wake. In particular, the aggressive physical miniaturization have increased CMOS fault sensitivity to the extent that many reliability constraints pose threat to the device normal operation and accelerate the onset of wearout-based failures. Among various wearout-based failure mechanisms, Negative biased temperature instability (NBTI) has been recognized as the most critical source of device aging.
The urge of reliable, low-power circuits is driving the EDA community to develop new design techniques, circuit solutions, algorithms, and software, that can address these critical issues. Unfortunately, this challenge is complicated by the fact that power and reliability are known to be intrinsically conflicting metrics: traditional solutions to improve reliability such as redundancy, increase of voltage levels, and up-sizing of critical devices do contrast with traditional low-power solutions, which rely on compact architectures, scaled supply voltages, and small devices.
This dissertation focuses on methodologies to bridge this gap and establishes an important link between low-power solutions and aging effects. More specifically, we proposed new architectural solutions based on power management strategies to enable the design of low-power, aging aware cache memories.
Cache memories are one of the most critical components for warranting reliable and timely operation. However, they are also more susceptible to aging effects. Due to symmetric structure of a memory cell, aging occurs regardless of the fact that a cell (or word) is accessed or not. Moreover, aging is a worst-case matric and line with worst-case access pattern determines the aging of the entire cache. In order to stop the aging of a memory cell, it must be put into a proper idle state when a cell (or word) is not accessed which require proper management of the idleness of each atomic unit of power management.
We have proposed several reliability management techniques based on the idea of cache partitioning to alleviate NBTI-induced aging and obtain joint energy and lifetime benefits. We introduce graceful degradation mechanism which allows different cache blocks into which a cache is partitioned to age at different rates. This implies that various sub-blocks become unreliable at different times, and the cache keeps functioning with reduced efficiency. We extended the capabilities of this architecture by integrating the concept of reconfigurable caches to maintain the performance of the cache throughout its lifetime. By this strategy, whenever a block becomes unreliable, the remaining cache is reconfigured to work as a smaller size cache with only a marginal degradation of performance.
Many mission-critical applications require guaranteed lifetime of their operations and therefore the hardware implementing their functionality. Such constraints are usually enforced by means of various reliability enhancing solutions mostly based on redundancy which are not energy-friendly. In our work, we have proposed a novel cache architecture in which a smart use of cache partitions for redundancy allows us to obtain cache that meet a desired lifetime target with minimal energy consumption
Simulating Execution Time and Power Consumption of Real-Time Tasks on Embedded Platforms
In this paper, we present PARTSim, an open-source power/thermal-aware simulator for embedded real-time systems. This tool is a fork of the well-known RTSim simulator, which can simulate the timing behavior of a set of real-time tasks with various characteristics when running on a multi-processor platform in presence of a number of real-time scheduling policies. PARTSim extends the functionality of RTSim by introducing support for power-aware embedded platforms exhibiting frequency scaling and specific architectural patterns like the ARM big.LITTLE and DynamIQ ones. Experimental results that compare simulated data against execution profiles collected on real platforms show a simulation error under 10 % for both execution time and power consumption at 90th percentile when simulating the effects of DVFS
- …