Control of flexible joint robotic manipulator using tuning functions design

The goal of this thesis is to design the controller for a single arm manipulator having a flexible joint for the tracking problem in two different cases. A controller is designed for a deterministic case wherein the plant parameters are assumed to be known while another is designed for an adaptive case where all the plant parameters are assumed to be unknown. In general the tracking problem is; given a smooth reference trajectory, the end effector has to track the reference while maintaining the stability. It is assumed that only the output of the manipulator, which is the link angle, is available for measurement. Also without loss of generality, the fast dynamics, that is the dynamics of the driver side of the system are neglected for the sake of simplicity; In the first case, the design procedure adopted is called observer backstepping. Since the states of the system are unavailable for measurement, an observer is designed that estimates the system states. These estimates are fed to the controller which in turn produces the control input to the system; The second case employs a design procedure called tuning functions design. In this case, since the plant parameters are unknown, the observer designed in case one cannot be used for determining the state estimates. For this purpose, parameter update laws and filters are designed for estimation of plant parameters. The filters employed are k-filters. The k-filters and the parameter update laws are given as input to the controller, which generates the control input to the system; For both cases, the mathematical models are simulated using Matlab/Simulink, and the results are verified

Advanced Strategies for Robot Manipulators

Amongst the robotic systems, robot manipulators have proven themselves to be of increasing importance and are widely adopted to substitute for human in repetitive and/or hazardous tasks. Modern manipulators are designed complicatedly and need to do more precise, crucial and critical tasks. So, the simple traditional control methods cannot be efficient, and advanced control strategies with considering special constraints are needed to establish. In spite of the fact that groundbreaking researches have been carried out in this realm until now, there are still many novel aspects which have to be explored

Industrial Robotics

This book covers a wide range of topics relating to advanced industrial robotics, sensors and automation technologies. Although being highly technical and complex in nature, the papers presented in this book represent some of the latest cutting edge technologies and advancements in industrial robotics technology. This book covers topics such as networking, properties of manipulators, forward and inverse robot arm kinematics, motion path-planning, machine vision and many other practical topics too numerous to list here. The authors and editor of this book wish to inspire people, especially young ones, to get involved with robotic and mechatronic engineering technology and to develop new and exciting practical applications, perhaps using the ideas and concepts presented herein

A robust adaptive controller for robot manipulators

The authors propose a globally convergent adaptive control scheme for robot motion control with the following features: first, the adaptation law processes enhanced robustness with respect to noisy velocity measurements; secondly, the controller does not require the inclusion of high-gain loops that may excite the unmodeled dynamics and amplify the noise level; thirdly the authors derive for the known parameter design a relationship between compensator gains and closed-loop convergence rates which is independent of the robot task. This helps the designer to carry out the gain tuning with an analysis of the robustness-performance tradeoff

Dynamic modeling, property investigation, and adaptive controller design of serial robotic manipulators modeled with structural compliance

Research results on general serial robotic manipulators modeled with structural compliances are presented. Two compliant manipulator modeling approaches, distributed and lumped parameter models, are used in this study. System dynamic equations for both compliant models are derived by using the first and second order influence coefficients. Also, the properties of compliant manipulator system dynamics are investigated. One of the properties, which is defined as inaccessibility of vibratory modes, is shown to display a distinct character associated with compliant manipulators. This property indicates the impact of robot geometry on the control of structural oscillations. Example studies are provided to illustrate the physical interpretation of inaccessibility of vibratory modes. Two types of controllers are designed for compliant manipulators modeled by either lumped or distributed parameter techniques. In order to maintain the generality of the results, neither linearization is introduced. Example simulations are given to demonstrate the controller performance. The second type controller is also built for general serial robot arms and is adaptive in nature which can estimate uncertain payload parameters on-line and simultaneously maintain trajectory tracking properties. The relation between manipulator motion tracking capability and convergence of parameter estimation properties is discussed through example case studies. The effect of control input update delays on adaptive controller performance is also studied

Task-space dynamic control of underwater robots

This thesis is concerned with the control aspects for underwater tasks performed by marine robots. The mathematical models of an underwater vehicle and an underwater vehicle with an onboard manipulator are discussed together with their associated properties. The task-space regulation problem for an underwater vehicle is addressed where the desired target is commonly specified as a point. A new control technique is proposed where the multiple targets are defined as sub-regions. A fuzzy technique is used to handle these multiple sub-region criteria effectively. Due to the unknown gravitational and buoyancy forces, an adaptive term is adopted in the proposed controller. An extension to a region boundary-based control law is then proposed for an underwater vehicle to illustrate the flexibility of the region reaching concept. In this novel controller, a desired target is defined as a boundary instead of a point or region. For a mapping of the uncertain restoring forces, a least-squares estimation algorithm and the inverse Jacobian matrix are utilised in the adaptive control law. To realise a new tracking control concept for a kinematically redundant robot, subregion tracking control schemes with a sub-tasks objective are developed for a UVMS. In this concept, the desired objective is specified as a moving sub-region instead of a trajectory. In addition, due to the system being kinematically redundant, the controller also enables the use of self-motion of the system to perform sub-tasks (drag minimisation, obstacle avoidance, manipulability and avoidance of mechanical joint limits)