2,424 research outputs found
Screening of energy efficient technologies for industrial buildings' retrofit
This chapter discusses screening of energy efficient technologies for industrial buildings' retrofit
Recommended from our members
On-chip micro-evaporation: Experimental evaluation of liquid pumping and vapor compression cooling systems
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.Thermal designers of data centers and server manufacturers are showing a great concern regarding the cooling of new generation data centers, which are more compact and dissipate more power than is currently
possible to cool by conventional air conditioning systems. With very large data centers exceeding 100 000 servers,
some consume more than 50 MW [1] of electrical energy to operate, energy which is directly converted to heat and then simply wasted as it is dissipated into the atmosphere. A potentially significantly better solution would be to make use of on-chip two-phase cooling [2], which, besides improving the cooling performance at the chip level, also adds the capability to reuse the waste heat in a convenient manner, since higher evaporating and condensing
temperatures of the two-phase cooling system (from 60-95°C) are possible with such a new green cooling technology. In the present project, two such two-phase cooling cycles using micro-evaporation technology were
experimentally evaluated with specific attention being paid to energy consumption, overall exergetic efficiency and controllability. The main difference between the two cooling cycles is the driver, where both a mini-compressor and a gear pump were considered. The former has the advantage due to its appeal of energy recovery since its exergy potential is higher and the waste heat is exported at a higher temperature for reuse.This study is supported by: the Swiss Commission for Technology and Innovation (CTI) contract number 6862.2; the LTCM laboratory; IBM ZĂĽrich Research
Laboratory (Switzerland) and Embraco (Brazil)
PREDICTIVE CONTROL OF POWER GRID-CONNECTED ENERGY SYSTEMS BASED ON ENERGY AND EXERGY METRICS
Building and transportation sectors account for 41% and 27% of total energy consumption in the US, respectively. Designing smart controllers for Heating, Ventilation and Air-Conditioning (HVAC) systems and Internal Combustion Engines (ICEs) can play a key role in reducing energy consumption. Exergy or availability is based on the First and Second Laws of Thermodynamics and is a more precise metric to evaluate energy systems including HVAC and ICE systems. This dissertation centers on development of exergy models and design of model-based controllers based on exergy and energy metrics for grid-connected energy systems including HVAC and ICEs.
In this PhD dissertation, effectiveness of smart controllers such as Model Predictive Controller (MPC) for HVAC system in reducing energy consumption in buildings has been shown. Given the unknown and varying behavior of buildings parameters, this dissertation proposes a modeling framework for online estimation of states and unknown parameters. This method leads to a Parameter Adaptive Building (PAB) model which is used for MPC.
Exergy destruction/loss in a system or process indicates the loss of work potential. In this dissertation, exergy destruction is formulated as the cost function for MPC problem. Compared to RBC, exergy-based MPC achieve 22% reduction in exergy destruction and 36% reduction in electrical energy consumption by HVAC system. In addition, the results show that exergy-based MPC outperforms energy-based MPC by 12% less energy consumption.
Furthermore, the similar exergy-based approach for building is developed to control ICE operation. A detailed ICE exergy model is developed for a single cylinder engine. Then, an optimal control method based on the exergy model of the ICE is introduced for transient and steady state operations of the ICE. The proposed exergy-based controller can be applied for two applications including (i) automotive (ii) Combined Heat and Power (CHP) systems to produce electric power and thermal energy for heating purposes in buildings. The results show that using the exergy-based optimal control strategy leads to an average of 6.7% fuel saving and 8.3% exergy saving compared to commonly used FLT based combustion control.
After developing thermal and exergy models for building and ICE testbeds, a framework is proposed for bilevel optimization in a system of commercial buildings integrated to smart distribution grid. The proposed framework optimizes the operation of both entities involved in the building-to-grid (B2G) integration. The framework achieves two objectives: (i) increases load penetration by maximizing the distribution system load factor and (ii) reduces energy cost for the buildings. The results show that this framework reduces commercial buildings electricity cost by 25% compared to the unoptimized case, while improving the system load factor up to 17%
Second law of thermodynamics and urban green infrastructure – A knowledge synthesis to address spatial planning strategies
Planning strategies driven by the second law of
thermodynamics (SLT) are innovative approaches to
sustainability but they are still in seminal phase. In this
article, a coupled review of SLT within spatial planning
is accomplished looking at the main applications in
urban green infrastructure (UGI) planning. In particular,
a systemic review of UGI planning and thermodynamics
has been carried out to identify all the occurrences to
date in the scientific literature. Secondly, a scoping
review of SLT-related concepts of exergy, entropy and
urban metabolism is presented in order to investigate
the main applications of, and gaps in, urban spatial
planning. Results indicate that UGI and ecosystem
service planning based on SLT is a relatively new field
of research. Moreover, some general indications are
derived for the development of spatial UGI planning
strategies based on SLT. The work then aims to
contribute to the improvement and/or development of
even more solid planning strategies supporting a SLTconscious
green transition of cities
Energy and Exergy Analysis of Data Center Economizer Systems
Electrical consumption for data centers is on the rise as more and more of them are being built. Data center owners and operators are looking for methods to reduce energy consumption and electrical costs. One method of reducing facility costs for a chilled water plant is by adding an economizer. Most studies concerning economizer systems are conducted largely by looking at energy alone since the primary focus is reducing electrical costs. Understanding how much exergy is destroyed, where it is destroyed, and why it is destroyed provides a more complete view on how environmental impacts can be minimized while reducing energy usage.
The purpose of this study is to develop energy and exergy-based models of the most common economizer systems. A normal chiller plant without an economizer and a chiller plant with an indirect wet-side economizer (the most common type of economizer system) are compared. Results show outdoor conditions influence facility energy consumption and exergy destruction. For a chiller plant operating with an economizer, the CRAH is found to be the largest source for exergy destruction. For a chiller plant without an economizer, the chiller is the largest source for exergy destruction
Selected Papers from SDEWES 2017: The 12th Conference on Sustainable Development of Energy, Water and Environment Systems
EU energy policy is more and more promoting a resilient, efficient and sustainable energy system. Several agreements have been signed in the last few months that set ambitious goals in terms of energy efficiency and emission reductions and to reduce the energy consumption in buildings. These actions are expected to fulfill the goals negotiated at the Paris Agreement in 2015. The successful development of this ambitious energy policy needs to be supported by scientific knowledge: a huge effort must be made in order to develop more efficient energy conversion technologies based both on renewables and fossil fuels. Similarly, researchers are also expected to work on the integration of conventional and novel systems, also taking into account the needs for the management of the novel energy systems in terms of energy storage and devices management. Therefore, a multi-disciplinary approach is required in order to achieve these goals. To ensure that the scientists belonging to the different disciplines are aware of the scientific progress in the other research areas, specific Conferences are periodically organized. One of the most popular conferences in this area is the Sustainable Development of Energy, Water and Environment Systems (SDEWES) Series Conference. The 12th Sustainable Development of Energy, Water and Environment Systems Conference was recently held in Dubrovnik, Croatia. The present Special Issue of Energies, specifically dedicated to the 12th SDEWES Conference, is focused on five main fields: energy policy and energy efficiency in smart energy systems, polygeneration and district heating, advanced combustion techniques and fuels, biomass and building efficiency
Heat Transfer in Energy Conversion Systems
In recent years, the scientific community’s interest towards efficient energy conversion systems has significantly increased. One of the reasons is certainly related to the change in the temperature of the planet, which appears to have increased by 0.76 °C with respect to pre-industrial levels, according to the Intergovernmental Panel on Climate Change (IPCC), and this trend has not yet been stopped. The European Union considers it vital to prevent global warming from exceeding 2 °C with respect to pre-industrial levels, since this phenomenon has been proven to result in irreversible and potentially catastrophic changes. These climate changes are mainly caused by the emissions of greenhouse gasses related to human activities, and can be drastically reduced by employing energy systems, for both heating and cooling of buildings and for power production, characterized by high efficiency levels and/or based on renewable energy sources. This Special Issue, published in the journal Energies, includes 12 contributions from across the world, including a wide range of applications, such as HT-PEMFC, district heating systems, a thermoelectric generator for industrial waste, artificial ground freezing, nanofluids, and others
Exergy-based Planning and Thermography-based Monitoring for energy efficient buildings - Progress Report (KIT Scientific Reports ; 7632)
Designing and monitoring energy efficiency of buildings is vital since they account for up to 40% of end-use energy. In this study, exergy analysis is investigated as a life cycle design tool to strike a balance between thermodynamic efficiency of energy conversion and economic and environmental costs of construction. Quantitative geo-referenced thermography is proposed for monitoring and quantitative assessment via continued simulation and parameter estimation during the operating phase
- …