238 research outputs found

    Development and Evaluation of a Multistatic Ultrawideband Random Noise Radar

    Get PDF
    This research studies the AFIT noise network (NoNET) radar node design and the feasibility in processing the bistatic channel information of a cluster of widely distributed noise radar nodes. A system characterization is used to predict theoretical localization performance metrics. Design and integration of a distributed and central signal and data processing architecture enables the Matlab®-driven signal data acquisition, digital processing and multi-sensor image fusion. Experimental evaluation of the monostatic localization performance reveals its range measurement error standard deviation is 4.8 cm with a range resolution of 87.2(±5.9) cm. The 16-channel multistatic solution results in a 2-dimensional localization error of 7.7(±3.1) cm and a comparative analysis is performed against the netted monostatic solution. Results show that active sensing with a low probability of intercept (LPI) multistatic radar, like the NoNET, is capable of producing sub-meter accuracy and near meter-resolution imagery

    Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays

    Full text link
    Massive MIMO (multiple-input multiple-output) is no longer a "wild" or "promising" concept for future cellular networks - in 2018 it became a reality. Base stations (BSs) with 64 fully digital transceiver chains were commercially deployed in several countries, the key ingredients of Massive MIMO have made it into the 5G standard, the signal processing methods required to achieve unprecedented spectral efficiency have been developed, and the limitation due to pilot contamination has been resolved. Even the development of fully digital Massive MIMO arrays for mmWave frequencies - once viewed prohibitively complicated and costly - is well underway. In a few years, Massive MIMO with fully digital transceivers will be a mainstream feature at both sub-6 GHz and mmWave frequencies. In this paper, we explain how the first chapter of the Massive MIMO research saga has come to an end, while the story has just begun. The coming wide-scale deployment of BSs with massive antenna arrays opens the door to a brand new world where spatial processing capabilities are omnipresent. In addition to mobile broadband services, the antennas can be used for other communication applications, such as low-power machine-type or ultra-reliable communications, as well as non-communication applications such as radar, sensing and positioning. We outline five new Massive MIMO related research directions: Extremely large aperture arrays, Holographic Massive MIMO, Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin

    Numerical and experimental comparison among a new hybrid FT-music technique and existing algorithms for through-the-wall radar imaging

    Get PDF
    A fast low-cost through-the-wall radar imaging (TWRI) system, based on a vector network analyzer (VNA), a couple of switches and an array of Vivaldi antennas, has been designed, realized, and tested. To solve the TWRI inversion problem, an original theoretical modeling for a class of TWRI techniques whose basic functions are the cross-range Fourier transform (FT) of the scattered field and its covariance operator has been proposed. Using these functions, four conventional algorithms, namely the delay and sum (DAS), the FT, the multiple signal classification (MUSIC), the hybrid DAS-MUSIC and a new algorithm, the hybrid FT-MUSIC, have been derived. All these techniques have been implemented and their accuracy and field of view have been tested on canonical scatterers. Then, the algorithms have been applied to measured data collected in different scenarios constituted by a metallic bar or a human subject in the absence and in the presence of a wall between the antenna and the considered targets. Using the proposed TWRI system, it has been possible to detect a subject located up to 5-m away from the radar antenna array through a tuff wall. The proposed FT-MUSIC algorithm has evidenced performances similar to those of the DAS-MUSIC but with significantly lower execution times. Finally, FT-MUSIC performances in terms of field of view and immunity to disturbances are better compared to those of the MUSIC algorithm

    Experimental Investigation Of Ultrawideband Wireless Systems: Waveform Generation, Propagation Estimation, And Dispersion Compensation

    Get PDF
    Ultrawideband (UWB) is an emerging technology for the future high-speed wireless communication systems. Although this technology offers several unique advantages like robustness to fading, large channel capacity and strong anti-jamming ability, there are a number of practical challenges which are topics of current research. One key challenge is the increased multipath dispersion which results because of the fine temporal resolution. The received response consists of different components, which have certain delays and attenuations due to the paths they took in their propagation from the transmitter to the receiver. Although such challenges have been investigated to some extent, they have not been fully explored in connection with sophisticated transmit beamforming techniques in realistic multipath environments. The work presented here spans three main aspects of UWB systems including waveform generation, propagation estimation, and dispersion compensation. We assess the accuracy of the measured impulse responses extracted from the spread spectrum channel sounding over a frequency band spanning 2-12 GHz. Based on the measured responses, different transmit beamforming techniques are investigated to achieve high-speed data transmission in rich multipath channels. We extend our work to multiple antenna systems and implement the first experimental test-bed to investigate practical challenges such as imperfect channel estimation or coherency between the multiple transmitters over the full UWB band. Finally, we introduce a new microwave photonic arbitrary waveform generation technique to demonstrate the first optical-wireless transmitter system for both characterizing channel dispersion and generating predistorted waveforms to achieve spatio-temporal focusing through the multipath channels

    Ultrawideband Antenna Distortion Compensation

    Get PDF
    Abstract-The radiation characteristics of ultrawideband (UWB) antennas vary with frequency, introducing directionally asymmetric bandwidth reduction and waveform dispersion. In this paper, we develop a simple technique to alleviate the distortion due to nonisotropically dispersive antennas, and use indoor channel measurements to verify its performance. The approach is based on multipath direction estimation and therefore involves antenna arrays. We show that antenna distortion can enhance sensor localization ambiguity and introduce errors in its estimate. Antenna compensation mitigates this effect, significantly improving the location estimation accuracy. We further demonstrate that antenna compensation helps reduce the small-scale fading artifacts that arise due to the antennas, thus reducing the channel spatial variability and delay spread. Our technique can also aid empirical channel characterization by providing antenna-independent propagation data

    Evaluation of coding scheme for MIMO radar

    Get PDF
    Multiple Input Multiple Output (MIMO) antenna systems have shown a great potential for wireless communication. These systems support high capacity, increased diversity and interference suppression. Recently it has been proposed MIMO constellations for Radar. MIMO Radar is not only a new research field, but also a very promising approach in terms of overcoming Radar Cross Section (RCS) fluctuations with diversity. This thesis explores the potential of coding schemes for MIMO Radar. The ambiguity functions measures related to MIMO Radar are used to evaluate how much diversity gain can be coherently achieved with certain coding schemes. The results of this analysis show that the cross correlation between the signals from different transmitters hinders achieving the full diversity gain. The code length of the used Gold codes is an important factor for this effect. However, in this thesis a coding scheme related to the Alamouti scheme in Communication is presented, this scheme under some constraints is capable of maintaining orthogonality between the signals from different transmitters and therefore cancels the mutual interference among those signals. In general, MIMO radar is a novel and ingenious approach to improve radar performance which needs to be analyzed and developed. This thesis is the first work exploring the coding schemes and the related aspects for MIMO Radar

    FMCW Signals for Radar Imaging and Channel Sounding

    Get PDF
    A linear / stepped frequency modulated continuous wave (FMCW) signal has for a long time been used in radar and channel sounding. A novel FMCW waveform known as “Gated FMCW” signal is proposed in this thesis for the suppression of strong undesired signals in microwave radar applications, such as: through-the-wall, ground penetrating, and medical imaging radar. In these applications the crosstalk signal between antennas and the reflections form the early interface (wall, ground surface, or skin respectively) are much stronger in magnitude compared to the backscattered signal from the target. Consequently, if not suppressed they overshadow the target’s return making detection a difficult task. Moreover, these strong unwanted reflections limit the radar’s dynamic range and might saturate or block the receiver causing the reflection from actual targets (especially targets with low radar cross section) to appear as noise. The effectiveness of the proposed waveform as a suppression technique was investigated in various radar scenarios, through numerical simulations and experiments. Comparisons of the radar images obtained for the radar system operating with the standard linear FMCW signal and with the proposed Gated FMCW waveform are also made. In addition to the radar work the application of FMCW signals to radio propagation measurements and channel characterisation in the 60 GHz and 2-6 GHz frequency bands in indoor and outdoor environments is described. The data are used to predict the bit error rate performance of the in-house built measurement based channel simulator and the results are compared with the theoretical multipath channel simulator available in Matlab
    • …
    corecore