Statistical Learning Theory for Location Fingerprinting in Wireless LANs

In this paper, techniques and algorithms developed in the framework of statistical learning theory are analyzed and applied to the problem of determining the location of a wireless device by measuring the signal strengths from a set of access points (location fingerprinting). Statistical Learning Theory provides a rich theoretical basis for the development of models starting from a set of examples. Signal strength measurement is part of the normal operating mode of wireless equipment, in particular Wi-Fi, so that no custom hardware is required. The proposed techniques, based on the Support Vector Machine paradigm, have been implemented and compared, on the same data set, with other approaches considered in the literature. Tests performed in a real-world environment show that results are comparable, with the advantage of a low algorithmic complexity in the normal operating phase. Moreover, the algorithm is particularly suitable for classification, where it outperforms the other techniques

Using Bad Learners to find Good Configurations

Finding the optimally performing configuration of a software system for a given setting is often challenging. Recent approaches address this challenge by learning performance models based on a sample set of configurations. However, building an accurate performance model can be very expensive (and is often infeasible in practice). The central insight of this paper is that exact performance values (e.g. the response time of a software system) are not required to rank configurations and to identify the optimal one. As shown by our experiments, models that are cheap to learn but inaccurate (with respect to the difference between actual and predicted performance) can still be used rank configurations and hence find the optimal configuration. This novel \emph{rank-based approach} allows us to significantly reduce the cost (in terms of number of measurements of sample configuration) as well as the time required to build models. We evaluate our approach with 21 scenarios based on 9 software systems and demonstrate that our approach is beneficial in 16 scenarios; for the remaining 5 scenarios, an accurate model can be built by using very few samples anyway, without the need for a rank-based approach.Comment: 11 pages, 11 figure

Sample- and segment-size specific Model Selection in Mixture Regression Analysis

As mixture regression models increasingly receive attention from both theory and practice, the question of selecting the correct number of segments gains urgency. A misspecification can lead to an under- or oversegmentation, thus resulting in flawed management decisions on customer targeting or product positioning. This paper presents the results of an extensive simulation study that examines the performance of commonly used information criteria in a mixture regression context with normal data. Unlike with previous studies, the performance is evaluated at a broad range of sample/segment size combinations being the most critical factors for the effectiveness of the criteria from both a theoretical and practical point of view. In order to assess the absolute performance of each criterion with respect to chance, the performance is reviewed against so called chance criteria, derived from discriminant analysis. The results induce recommendations on criterion selection when a certain sample size is given and help to judge what sample size is needed in order to guarantee an accurate decision based on a certain criterion respectively

3D freeform surfaces from planar sketches using neural networks

A novel intelligent approach into 3D freeform surface reconstruction from planar sketches is proposed. A multilayer perceptron (MLP) neural network is employed to induce 3D freeform surfaces from planar freehand curves. Planar curves were used to represent the boundaries of a freeform surface patch. The curves were varied iteratively and sampled to produce training data to train and test the neural network. The obtained results demonstrate that the network successfully learned the inverse-projection map and correctly inferred the respective surfaces from fresh curves

A novel haptic model and environment for maxillofacial surgical operation planning and manipulation

This paper presents a practical method and a new haptic model to support manipulations of bones and their segments during the planning of a surgical operation in a virtual environment using a haptic interface. To perform an effective dental surgery it is important to have all the operation related information of the patient available beforehand in order to plan the operation and avoid any complications. A haptic interface with a virtual and accurate patient model to support the planning of bone cuts is therefore critical, useful and necessary for the surgeons. The system proposed uses DICOM images taken from a digital tomography scanner and creates a mesh model of the filtered skull, from which the jaw bone can be isolated for further use. A novel solution for cutting the bones has been developed and it uses the haptic tool to determine and define the bone-cutting plane in the bone, and this new approach creates three new meshes of the original model. Using this approach the computational power is optimized and a real time feedback can be achieved during all bone manipulations. During the movement of the mesh cutting, a novel friction profile is predefined in the haptical system to simulate the force feedback feel of different densities in the bone

Nmag micromagnetic simulation tool - software engineering lessons learned

We review design and development decisions and their impact for the open source code Nmag from a software engineering in computational science point of view. We summarise lessons learned and recommendations for future computational science projects. Key lessons include that encapsulating the simulation functionality in a library of a general purpose language, here Python, provides great flexibility in using the software. The choice of Python for the top-level user interface was very well received by users from the science and engineering community. The from-source installation in which required external libraries and dependencies are compiled from a tarball was remarkably robust. In places, the code is a lot more ambitious than necessary, which introduces unnecessary complexity and reduces main- tainability. Tests distributed with the package are useful, although more unit tests and continuous integration would have been desirable. The detailed documentation, together with a tutorial for the usage of the system, was perceived as one of its main strengths by the community.Comment: 7 pages, 5 figures, Software Engineering for Science, ICSE201