543 research outputs found

    A survey on fractional order control techniques for unmanned aerial and ground vehicles

    Get PDF
    In recent years, numerous applications of science and engineering for modeling and control of unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) systems based on fractional calculus have been realized. The extra fractional order derivative terms allow to optimizing the performance of the systems. The review presented in this paper focuses on the control problems of the UAVs and UGVs that have been addressed by the fractional order techniques over the last decade

    Fault Detection and Tolerant Control for Aero2 2DOF Two-rotor Helicopter

    Get PDF
    Stability and satisfactory performance are keycontrol requirements for any Unmanned Aerial Vehicle (UAV)application. Although conventional control systems for UAVsare designed to ensure flight stability and safe operation whileachieving a desired task, a UAV may develop different typesof flight faults that could lead to degradation in performanceor, worse, instability. Unsatisfactory performance or instabilityof a UAV poses threats to lives, properties, and the flyingenvironment. Therefore, it is crucial to design a system thatcan detect the occurrence of faults, identify the location atwhich the fault occurs, determine the severity of the fault, andsubsequently use this information to accommodate the faultso that the vehicle can continue to operate satisfactorily. Eventhough performance analysis of faults is crucial in selecting thebest strategies for fault detection and tolerance, little has beendone in this regard, especially with real systems. Therefore,this paper analyzes the performance of a 2-degree-of-freedom(2DOF) bi-rotor helicopter’s control system in the presenceof various actuator faults. Results from different faultyconditions indicate that faults degrade the performance of aconventional control system on UAVs and introduce vibrationsinto the system. These findings are more apparent whena fault leads to asymmetry or imbalance of the system.However, further experiments have shown that proper faultdiagnosis and accommodation methods could help maintainsatisfactory performance of the system in the presence of faults

    Fault Diagnosis and Fault-Tolerant Control of Unmanned Aerial Vehicles

    Get PDF
    With the increasing demand for unmanned aerial vehicles (UAVs) in both military and civilian applications, critical safety issues need to be specially considered in order to make better and wider use of them. UAVs are usually employed to work in hazardous and complex environments, which may seriously threaten the safety and reliability of UAVs. Therefore, the safety and reliability of UAVs are becoming imperative for development of advanced intelligent control systems. The key challenge now is the lack of fully autonomous and reliable control techniques in face of different operation conditions and sophisticated environments. Further development of unmanned aerial vehicle (UAV) control systems is required to be reliable in the presence of system component faults and to be insensitive to model uncertainties and external environmental disturbances. This thesis research aims to design and develop novel control schemes for UAVs with consideration of all the factors that may threaten their safety and reliability. A novel adaptive sliding mode control (SMC) strategy is proposed to accommodate model uncertainties and actuator faults for an unmanned quadrotor helicopter. Compared with the existing adaptive SMC strategies in the literature, the proposed adaptive scheme can tolerate larger actuator faults without stimulating control chattering due to the use of adaptation parameters in both continuous and discontinuous control parts. Furthermore, a fuzzy logic-based boundary layer and a nonlinear disturbance observer are synthesized to further improve the capability of the designed control scheme for tolerating model uncertainties, actuator faults, and unknown external disturbances while preventing overestimation of the adaptive control parameters and suppressing the control chattering effect. Then, a cost-effective fault estimation scheme with a parallel bank of recurrent neural networks (RNNs) is proposed to accurately estimate actuator fault magnitude and an active fault-tolerant control (FTC) framework is established for a closed-loop quadrotor helicopter system. Finally, a reconfigurable control allocation approach is combined with adaptive SMC to achieve the capability of tolerating complete actuator failures with application to a modified octorotor helicopter. The significance of this proposed control scheme is that the stability of the closed-loop system is theoretically guaranteed in the presence of both single and simultaneous actuator faults

    Fault Tolerant Super Twisting Sliding Mode Control of a Quadrotor UAV Using Control Allocation

    Get PDF
    In this study, a fault-tolerant super-twisting sliding mode controller with a control allocation system for a quadrotor aircraft is proposed. Super twisting sliding mode control is a robust control technique that handles a system with a relative degree equal to one. A super-twisting sliding mode controller is proposed because of its robustness to uncertainties and perturbations. It increases accuracy and reduces chattering. A control allocation algorithm is developed to cope with the actuator fault. Firstly, a nonlinear model of the quadrotor unmanned aerial vehicle (UAV) is presented. Then, the controller design and type of the actuator fault are explained. The control allocation algorithm is used to optimize the trajectory tracking performance of the quadrotor in the presence of an actuator fault. A control allocation algorithm is an effective approach to implementing fault-tolerant control. When actuator faults are identified, they can be modeled as changes in the B matrix of constraints. Various simulations have been made for situations with and without actuator failure. In normal conditions, the quadrotor can accurately track altitude, roll, pitch and yaw references. In faulty conditions, the quadrotor can follow the references with a small error. Simulations prove the effectiveness of the control allocation algorithm, which stabilizes the quadrotor in case of an actuator fault. Overall, this paper presents a novel fault-tolerant controller design for quadrotor aircraft that effectively addresses actuator faults using a super-twisting sliding mode controller and control allocation algorithm

    A review of convex approaches for control, observation and safety of linear parameter varying and Takagi-Sugeno systems

    Get PDF
    This paper provides a review about the concept of convex systems based on Takagi-Sugeno, linear parameter varying (LPV) and quasi-LPV modeling. These paradigms are capable of hiding the nonlinearities by means of an equivalent description which uses a set of linear models interpolated by appropriately defined weighing functions. Convex systems have become very popular since they allow applying extended linear techniques based on linear matrix inequalities (LMIs) to complex nonlinear systems. This survey aims at providing the reader with a significant overview of the existing LMI-based techniques for convex systems in the fields of control, observation and safety. Firstly, a detailed review of stability, feedback, tracking and model predictive control (MPC) convex controllers is considered. Secondly, the problem of state estimation is addressed through the design of proportional, proportional-integral, unknown input and descriptor observers. Finally, safety of convex systems is discussed by describing popular techniques for fault diagnosis and fault tolerant control (FTC).Peer ReviewedPostprint (published version

    Fault Diagnosis and Fault Handling for Autonomous Aircraft

    Get PDF

    Flight evaluations of sliding mode fault tolerant controllers

    Get PDF
    This is the author accepted manuscript. The final version is available from the publisher via the DOI in this recordThis paper considers the development of fault tolerant controllers (FTC) and their application to aerospace system. In particular, given the extensive and growing literature in this area, this paper focusses on methods where the schemes have been implemented and flight tested. One thread of the fault tolerant control literature has involved sliding mode controllers. This paper considers a specific class of sliding mode FTC which incorporates control allocation to exploit over-actuation (which is typically present in aerospace systems). The paper describes implementations of these ideas on a small quadrotor UAV and also piloted flight tests on a full-scale twin-engined aircraft

    Fault tolerant control of multi-rotor unmanned aerial vehicles using sliding mode based schemes

    Get PDF
    This thesis investigates fault-tolerant control (FTC) for the specific application of small multirotor unmanned aerial vehicles (Unmanned Aerial Vehicle (UAV)s). The fault-tolerant controllers in this thesis are based on the combination of sliding mode control with control allocation where the control signals are distributed based on motors' health level. This alleviates the need to reconfigure the overall structure of the controllers. The thesis considered both the over actuated (sufficient redundancy) and under-actuated UAVs. Three multirotor UAVs have been considered in this thesis which includes a quadrotor (4 rotors), an Octocopter (8 rotors) and a spherical UAV. The non-linear mathematical models for each of the UAVs are presented. One of the main contributions of this thesis is the hardware implementation of the sliding mode Fault Tolerant Control (FTC) scheme on an open-source autopilot microcontroller called Pixhawk for a quadrotor UAV. The controller was developed in Simulink and implemented on the microcontroller using the Matlab/Simulink support packages. A gimbal- based test rig was developed and built to offer a safe test bed for testing control designs. Actual flight tests were done which showed sound responses during fault-free and faulty scenarios. This work represents one of successful implementation work of sliding mode FTC in the literature. Another key contribution of this thesis is the development of the mathematical model of a unique spherical UAV with highly redundant control inputs. The use of novel 8 flaps and 2 rotors configuration of the spherical UAV considered in this thesis provides a unique fault tolerant capability, especially when combined with the sliding mode-based FTC scheme. A key development in the later chapters of the thesis considers fault-tolerant control strategy when no redundancy is available. Unlike many works which consider FTC on quadrotors in the literature (which can only handle faults), the proposed schemes in the later chapters also include cases when failures also occur converting the system to an under actuated system. In one chapter, a bespoke Linear Parameter Varying (LPV) based controller is developed for a reduced attitude dynamics system by exploiting non-standard equation of motions which relates to position acceleration and load factor dynamics. This is unique as compared to the typical Euler angle control (roll, pitch and yaw angle control). In the last chapter, a fault-tolerant control scheme which can handle both the over and under actuated system is presented. The scheme considers an octocopter and can be used in fault-free, faulty and failure conditions up to two remaining motors. The scheme exploits the differential flatness property, another unique property of multirotor UAVs. This allows both inner loop and outer loop controller to be designed using sliding mode (as opposed to many sliding mode FTC in the literature, which only considers sliding mode for the inner loop control)
    • …
    corecore