Contrast Enhancement for Images in Turbid Water

Absorption, scattering, and color distortion are three major degradation factors in underwater optical imaging. Light rays are absorbed while passing through water, and absorption rates depend on the wavelength of the light. Scattering is caused by large suspended particles, which are always observed in an underwater environment. Color distortion occurs because the attenuation ratio is inversely proportional to the wavelength of light when light passes through a unit length in water. Consequently, underwater images are dark, low contrast, and dominated by a bluish tone. In this paper, we propose a novel underwater imaging model that compensates for the attenuation discrepancy along the propagation path. In addition, we develop a robust color lines-based ambient light estimator and a locally adaptive filtering algorithm for enhancing underwater images in shallow oceans. Furthermore, we propose a spectral characteristic-based color correction algorithm to recover the distorted color. The enhanced images have a reasonable noise level after the illumination compensation in the dark regions, and demonstrate an improved global contrast by which the finest details and edges are enhanced significantly

水中イメージングシステムのための画質改善に関する研究

Underwater survey systems have numerous scientific or industrial applications in the fields of geology, biology, mining, and archeology. These application fields involve various tasks such as ecological studies, environmental damage assessment, and ancient prospection. During two decades, underwater imaging systems are mainly equipped by Underwater Vehicles (UV) for surveying in water or ocean. Challenges associated with obtaining visibility of objects have been difficult to overcome due to the physical properties of the medium. In the last two decades, sonar is usually used for the detection and recognition of targets in the ocean or underwater environment. However, because of the low quality of images by sonar imaging, optical vision sensors are then used instead of it for short range identification. Optical imaging provides short-range, high-resolution visual information of the ocean floor. However, due to the light transmission’s physical properties in the water medium, the optical imaged underwater images are usually performance as poor visibility. Light is highly attenuated when it travels in the ocean. Consequence, the imaged scenes result as poorly contrasted and hazy-like obstructions. The underwater imaging processing techniques are important to improve the quality of underwater images. As mentioned before, underwater images have poor visibility because of the medium scattering and light distortion. In contrast to common photographs, underwater optical images suffer from poor visibility owing to the medium, which causes scattering, color distortion, and absorption. Large suspended particles cause scattering similar to the scattering of light in fog or turbid water that contain many suspended particles. Color distortion occurs because different wavelengths are attenuated to different degrees in water; consequently, images of ambient in the underwater environments are dominated by a bluish tone, because higher wavelengths are attenuated more quickly. Absorption of light in water substantially reduces its intensity. The random attenuation of light causes a hazy appearance as the light backscattered by water along the line of sight considerably degrades image contrast. Especially, objects at a distance of more than 10 meters from the observation point are almost unreadable because colors are faded as characteristic wavelengths, which are filtered according to the distance traveled by light in water. So, traditional image processing methods are not suitable for processing them well. This thesis proposes strategies and solutions to tackle the above mentioned problems of underwater survey systems. In this thesis, we contribute image pre-processing, denoising, dehazing, inhomogeneities correction, color correction and fusion technologies for underwater image quality improvement. The main content of this thesis is as follows. First, comprehensive reviews of the current and most prominent underwater imaging systems are provided in Chapter 1. A main features and performance based classification criterion for the existing systems is presented. After that, by analyzing the challenges of the underwater imaging systems, a hardware based approach and non-hardware based approach is introduced. In this thesis, we are concerned about the image processing based technologies, which are one of the non-hardware approaches, and take most recent methods to process the low quality underwater images. As the different sonar imaging systems applied in much equipment, such as side-scan sonar, multi-beam sonar. The different sonar acquires different images with different characteristics. Side-scan sonar acquires high quality imagery of the seafloor with very high spatial resolution but poor locational accuracy. On the contrast, multi-beam sonar obtains high precision position and underwater depth in seafloor points. In order to fully utilize all information of these two types of sonars, it is necessary to fuse the two kinds of sonar data in Chapter 2. Considering the sonar image forming principle, for the low frequency curvelet coefficients, we use the maximum local energy method to calculate the energy of two sonar images. For the high frequency curvelet coefficients, we take absolute maximum method as a measurement. The main attributes are: firstly, the multi-resolution analysis method is well adapted the cured-singularities and point-singularities. It is useful for sonar intensity image enhancement. Secondly, maximum local energy is well performing the intensity sonar images, which can achieve perfect fusion result [42]. In Chapter 3, as analyzed the underwater laser imaging system, a Bayesian Contourlet Estimator of Bessel K Form (BCE-BKF) based denoising algorithm is proposed. We take the BCE-BKF probability density function (PDF) to model neighborhood of contourlet coefficients. After that, according to the proposed PDF model, we design a maximum a posteriori (MAP) estimator, which relies on a Bayesian statistics representation of the contourlet coefficients of noisy images. The denoised laser images have better contrast than the others. There are three obvious virtues of the proposed method. Firstly, contourlet transform decomposition prior to curvelet transform and wavelet transform by using ellipse sampling grid. Secondly, BCE-BKF model is more effective in presentation of the noisy image contourlet coefficients. Thirdly, the BCE-BKF model takes full account of the correlation between coefficients [107]. In Chapter 4, we describe a novel method to enhance underwater images by dehazing. In underwater optical imaging, absorption, scattering, and color distortion are three major issues in underwater optical imaging. Light rays traveling through water are scattered and absorbed according to their wavelength. Scattering is caused by large suspended particles that degrade optical images captured underwater. Color distortion occurs because different wavelengths are attenuated to different degrees in water; consequently, images of ambient underwater environments are dominated by a bluish tone. Our key contribution is to propose a fast image and video dehazing algorithm, to compensate the attenuation discrepancy along the propagation path, and to take the influence of the possible presence of an artificial lighting source into consideration [108]. In Chapter 5, we describe a novel method of enhancing underwater optical images or videos using guided multilayer filter and wavelength compensation. In certain circumstances, we need to immediately monitor the underwater environment by disaster recovery support robots or other underwater survey systems. However, due to the inherent optical properties and underwater complex environment, the captured images or videos are distorted seriously. Our key contributions proposed include a novel depth and wavelength based underwater imaging model to compensate for the attenuation discrepancy along the propagation path and a fast guided multilayer filtering enhancing algorithm. The enhanced images are characterized by a reduced noised level, better exposure of the dark regions, and improved global contrast where the finest details and edges are enhanced significantly [109]. The performance of the proposed approaches and the benefits are concluded in Chapter 6. Comprehensive experiments and extensive comparison with the existing related techniques demonstrate the accuracy and effect of our proposed methods.九州工業大学博士学位論文 学位記番号:工博甲第367号　学位授与年月日:平成26年3月25日CHAPTER 1 INTRODUCTION|CHAPTER 2 MULTI-SOURCE IMAGES FUSION|CHAPTER 3 LASER IMAGES DENOISING|CHAPTER 4 OPTICAL IMAGE DEHAZING|CHAPTER 5 SHALLOW WATER DE-SCATTERING|CHAPTER 6 CONCLUSIONS九州工業大学平成25年

On the limits of perceptual quality measures for enhanced underwater images

The appearance of objects in underwater images is degraded by the selective attenuation of light, which reduces contrast and causes a colour cast. This degradation depends on the water environment, and increases with depth and with the distance of the object from the camera. Despite an increasing volume of works in underwater image enhancement and restoration, the lack of a commonly accepted evaluation measure is hindering the progress as it is difficult to compare methods. In this paper, we review commonly used colour accuracy measures, such as colour reproduction error and CIEDE2000, and no-reference image quality measures, such as UIQM, UCIQE and CCF, which have not yet been systematically validated. We show that none of the no-reference quality measures satisfactorily rates the quality of enhanced underwater images and discuss their main shortcomings. Images and results are available at https://puiqe.eecs.qmul.ac.uk.Comment: Accepted in ICIP 202

Generation and processing of simulated underwater images for infrastructure visual inspection with UUVs

The development of computer vision algorithms for navigation or object detection is one of the key issues of underwater robotics. However, extracting features from underwater images is challenging due to the presence of lighting defects, which need to be counteracted. This requires good environmental knowledge, either as a dataset or as a physic model. The lack of available data, and the high variability of the conditions, makes difficult the development of robust enhancement algorithms. A framework for the development of underwater computer vision algorithms is presented, consisting of a method for underwater imaging simulation, and an image enhancement algorithm, both integrated in the open-source robotics simulator UUV Simulator. The imaging simulation is based on a novel combination of the scattering model and style transfer techniques. The use of style transfer allows a realistic simulation of different environments without any prior knowledge of them. Moreover, an enhancement algorithm that successfully performs a correction of the imaging defects in any given scenario for either the real or synthetic images has been developed. The proposed approach showcases then a novel framework for the development of underwater computer vision algorithms for SLAM, navigation, or object detection in UUV