Application of Supercomputer Technologies for Simulation of Socio-Economic Systems

To date, an extensive experience has been accumulated in investigation of problems related to quality, assessment of management systems, modeling of economic system sustainability. The studies performed have created a basis for formation of a new research area — Economics of Quality. Its tools allow to use opportunities of model simulation for construction of the mathematical models adequately reflecting the role of quality in natural, technical, social regularities of functioning of the complex socioeconomic systems. Extensive application and development of models, and also system modeling with use of supercomputer technologies, on our deep belief, will bring the conducted researches of social and economic systems to essentially new level. Moreover, the current scientific research makes a significant contribution to model simulation of multi-agent social systems and that isn’t less important, it belongs to the priority areas in development of science and technology in our country. This article is devoted to the questions of supercomputer technologies application in public sciences, first of all, — regarding technical realization of the large-scale agent-focused models (AFM). The essence of this tool is that owing to increase in power of computers it became possible to describe the behavior of many separate fragments of a difficult system, as social and economic systems represent. The article also deals with the experience of foreign scientists and practicians in launching the AFM on supercomputers, and also the example of AFM developed in CEMI RAS, stages and methods of effective calculating kernel display of multi-agent system on architecture of a modern supercomputer will be analyzed. The experiments on the basis of model simulation on forecasting the population of St. Petersburg according to three scenarios as one of the major factors influencing the development of social and economic system and quality of life of the population are presented in the conclusion

LIDAR obstacle warning and avoidance system for unmanned aerial vehicle sense-and-avoid

The demand for reliable obstacle warning and avoidance capabilities to ensure safe low-level flight operations has led to the development of various practical systems suitable for fixed and rotary wing aircraft. State-of-the-art Light Detection and Ranging (LIDAR) technology employing eye-safe laser sources, advanced electro-optics and mechanical beam-steering components delivers the highest angular resolution and accuracy performances in a wide range of operational conditions. LIDAR Obstacle Warning and Avoidance System (LOWAS) is thus becoming a mature technology with several potential applications to manned and unmanned aircraft. This paper addresses specifically its employment in Unmanned Aircraft Systems (UAS) Sense-and-Avoid (SAA). Small-to-medium size Unmanned Aerial Vehicles (UAVs) are particularly targeted since they are very frequently operated in proximity of the ground and the possibility of a collision is further aggravated by the very limited see-and-avoid capabilities of the remote pilot. After a brief description of the system architecture, mathematical models and algorithms for avoidance trajectory generation are provided. Key aspects of the Human Machine Interface and Interaction (HMI2) design for the UAS obstacle avoidance system are also addressed. Additionally, a comprehensive simulation case study of the avoidance trajectory generation algorithms is presented. It is concluded that LOWAS obstacle detection and trajectory optimisation algorithms can ensure a safe avoidance of all classes of obstacles (i.e., wire, extended and point objects) in a wide range of weather and geometric conditions, providing a pathway for possible integration of this technology into future UAS SAA architectures

An investigation into the validity of utilising the CDRAD 2.0 phantom for optimisation studies in digital radiography

Objectives: To determine if a relationship exists between low contrast detail (LCD) detectability using the CDRAD 2.0 phantom, visual measures of image quality (IQ) and simulated lesion visibility (LV) when performing digital chest radiography (CXR). Methods: Using a range of acquisition parameters, a CDRAD 2.0 phantom was used to acquire a set of images with different levels of image quality. LCD detectability using the CDRAD 2.0 phantom, represented by an image quality figure inverse (IQFinv) metric, was determined using the phantom analyser software. A Lungman chest phantom was loaded with two simulated lesions, of different sizes / placed in different locations, and was imaged using the same acquisition factors as the CDRAD phantom. A relative visual grading analysis (VGA) was used by seven observers for IQ and LV evaluation of the Lungman images. Correlations between IQFinv, IQ and LV were investigated. Results: Pearson’s correlation demonstrated a strong positive correlation (r=0.91; p<0.001) between the IQ and the IQFinv. Spearman’s correlation showed a good positive correlation (r=0.79; p<0.001) and (r=0.68; p<0.001) between the IQFinv and the LV for the first lesion (left upper lobe) and the second lesion (right middle lobe), respectively. Conclusions: From results presented in this study, the automated evaluation of LCD detectability using CDRAD 2.0 phantom is likely to be a suitable option for IQ and LV evaluation in digital CXR optimisation studies

Simulation and BIM in building design, commissioning and operation: a comparison with the microelectronics industry

Analogy between the Microelectronics and Building industries is explored with the focus on design, commissioning and operation processes. Some issues found in the realisation of low energy buildings are highlighted and techniques gleaned from microelectronics proposed as possible solutions. Opportunities identified include: adoption of a more integrated process, use of standard cells, inclusion of controls and operational code in the design, generation of building commissioning tests from simulation, generation of building operational control code (including self-test) from simulation, inclusion of variation and uncertainties in the design process, use of quality processes such as indices to represent design robustness and formal continuous improvement methods. The possible integration of these techniques within a building information model (BIM) flow is discussed and some examples of enabling technologies given

Single-photon emitting diode in silicon carbide

Electrically driven single-photon emitting devices have immediate applications in quantum cryptography, quantum computation and single-photon metrology. Mature device fabrication protocols and the recent observations of single defect systems with quantum functionalities make silicon carbide (SiC) an ideal material to build such devices. Here, we demonstrate the fabrication of bright single photon emitting diodes. The electrically driven emitters display fully polarized output, superior photon statistics (with a count rate of $>$300 kHz), and stability in both continuous and pulsed modes, all at room temperature. The atomic origin of the single photon source is proposed. These results provide a foundation for the large scale integration of single photon sources into a broad range of applications, such as quantum cryptography or linear optics quantum computing.Comment: Main: 10 pages, 6 figures. Supplementary Information: 6 pages, 6 figure

Case study based approach to integration of sustainable design analysis, performance and building information modelling

This paper presents a case study based research of both the method and technology for integration of sustainable design analysis (SDA) and building information modelling (BIM) within smart built environments (SBE). Level 3 BIM federation and integration challenges are recognised and improvements suggested, including issues with combining geometry and managing attribute data. The research defines SDA as rapid and quantifiable analysis of diverse sustainable alternatives and ‘what if’ scenarios posed by a design team and client during the early stages of the project, where the benefits of correct decisions can significantly exceed the actual investment required. The SDA concept and BIM integration findings are explained through a convergence from conceptualisation to calculation stages, emphasising the importance of an iterative over a linear approach. The approach allowed for a multitude of “what if” scenarios to be analysed, leading to more informed sustainable solutions at the right stages of the project development, with a generally lower level of detail (LOD) and computational/modelling effort required. In addition, the final stage of Building Regulations Part L compliance calculations was reached with a lot greater level of certainty, in terms of its requirements. Finally, a strategy for long term performance monitoring and evaluation of the building design in terms of its environmental sustainability is presented, via integration between BIM and SBE (Smart Built Environment) technologies