24,540 research outputs found
Use of nonintrusive sensor-based information and communication technology for real-world evidence for clinical trials in dementia
Cognitive function is an important end point of treatments in dementia clinical trials. Measuring cognitive function by standardized tests, however, is biased toward highly constrained environments (such as hospitals) in selected samples. Patient-powered real-world evidence using information and communication technology devices, including environmental and wearable sensors, may help to overcome these limitations. This position paper describes current and novel information and communication technology devices and algorithms to monitor behavior and function in people with prodromal and manifest stages of dementia continuously, and discusses clinical, technological, ethical, regulatory, and user-centered requirements for collecting real-world evidence in future randomized controlled trials. Challenges of data safety, quality, and privacy and regulatory requirements need to be addressed by future smart sensor technologies. When these requirements are satisfied, these technologies will provide access to truly user relevant outcomes and broader cohorts of participants than currently sampled in clinical trials
SCADA System Testbed for Cybersecurity Research Using Machine Learning Approach
This paper presents the development of a Supervisory Control and Data
Acquisition (SCADA) system testbed used for cybersecurity research. The testbed
consists of a water storage tank's control system, which is a stage in the
process of water treatment and distribution. Sophisticated cyber-attacks were
conducted against the testbed. During the attacks, the network traffic was
captured, and features were extracted from the traffic to build a dataset for
training and testing different machine learning algorithms. Five traditional
machine learning algorithms were trained to detect the attacks: Random Forest,
Decision Tree, Logistic Regression, Naive Bayes and KNN. Then, the trained
machine learning models were built and deployed in the network, where new tests
were made using online network traffic. The performance obtained during the
training and testing of the machine learning models was compared to the
performance obtained during the online deployment of these models in the
network. The results show the efficiency of the machine learning models in
detecting the attacks in real time. The testbed provides a good understanding
of the effects and consequences of attacks on real SCADA environmentsComment: E-Preprin
Wireless communication, identification and sensing technologies enabling integrated logistics: a study in the harbor environment
In the last decade, integrated logistics has become an important challenge in
the development of wireless communication, identification and sensing
technology, due to the growing complexity of logistics processes and the
increasing demand for adapting systems to new requirements. The advancement of
wireless technology provides a wide range of options for the maritime container
terminals. Electronic devices employed in container terminals reduce the manual
effort, facilitating timely information flow and enhancing control and quality
of service and decision made. In this paper, we examine the technology that can
be used to support integration in harbor's logistics. In the literature, most
systems have been developed to address specific needs of particular harbors,
but a systematic study is missing. The purpose is to provide an overview to the
reader about which technology of integrated logistics can be implemented and
what remains to be addressed in the future
Recommended from our members
Integrating Smart Ceiling Fans and Communicating Thermostats to Provide Energy-Efficient Comfort
The project goal was to identify and test the integration of smart ceiling fans and communicating thermostats. These highly efficient ceiling fans use as much power as an LED light bulb and have onboard temperature and occupancy sensors for automatic operationbased on space conditions. The Center for the Environment (CBE) at UC Berkeley led the research team including TRC, Association for Energy Affordability (AEA), and Big Ass Fans (BAF). The research team conducted laboratory tests, installed99 ceiling fans and 12 thermostats in four affordable multifamily housing sites in California’s Central Valley, interviewed stakeholders to develop a case study, developed an online design tool and design guide, outlined codes and standards outreach, and published several papers.The project team raised indoor cooling temperature setpoints and used ceiling fans as the first stage of cooling; this sequencing of ceiling fans and air conditioningreducesenergy consumption, especially during peak periods, while providing thermal comfort.The field demonstration resulted in 39% measured compressor energy savings during the April–October cooling seasoncompared to baseline conditions, normalized for floor area. Weather-normalized energy use varied from a 36% increase to 71% savings, withmedian savings of 15%.This variability reflects the diversity in buildings, mechanical systems, prior operation settings, space types, andoccupants’ schedules,preferences, and motivations. All commercial spaces with regular occupancy schedules (and twoof the irregularly-occupied commercial spaces and one of the homes) showed energy savings on an absolute basis before normalizing for warmer intervention temperatures,and 10 of 13 sites showed energy savings on a weather-normalized basis. The ceiling fans provided cooling for one site for months during hot weather when the coolingequipment failed.Occupants reported high satisfaction with the ceiling fans and improved thermal comfort. This technology can apply to new and retrofit residential and commercial buildings
A comparison of processing techniques for producing prototype injection moulding inserts.
This project involves the investigation of processing techniques for producing low-cost moulding inserts used in the particulate injection moulding (PIM) process. Prototype moulds were made from both additive and subtractive processes as well as a combination of the two. The general motivation for this was to reduce the entry cost of users when considering PIM.
PIM cavity inserts were first made by conventional machining from a polymer block using the pocket NC desktop mill. PIM cavity inserts were also made by fused filament deposition modelling using the Tiertime UP plus 3D printer.
The injection moulding trials manifested in surface finish and part removal defects. The feedstock was a titanium metal blend which is brittle in comparison to commodity polymers. That in combination with the mesoscale features, small cross-sections and complex geometries were considered the main problems. For both processing methods, fixes were identified and made to test the theory. These consisted of a blended approach that saw a combination of both the additive and subtractive processes being used.
The parts produced from the three processing methods are investigated and their respective merits and issues are
discussed
Raising awareness for water polution based on game activities using internet of things
Awareness among young people regarding the environment and its resources and comprehension of the various factors that interplay, is key to changing human behaviour towards achieving a sustainable planet. In this paper IoT equipment, utilizing sensors for measuring various parameters of water quality, is used in an educational context targeting at a deeper understanding of the use of natural resources towards the adoption of environmentally friendly behaviours. We here note that the use of water sensors in STEM gameful learning is an area which has not received a lot of attention in the previous years. The IoT water sensing and related scenaria and practices, addressing children via discovery, gamification, and educational activities, are discussed in detail
Ontology-based data semantic management and application in IoT- and cloud-enabled smart homes
The application of emerging technologies of Internet of Things (IoT) and cloud computing have increasing the popularity of smart homes, along with which, large volumes of heterogeneous data have been generating by home entities. The representation, management and application of the continuously increasing amounts of heterogeneous data in the smart home data space have been critical challenges to the further development of smart home industry. To this end, a scheme for ontology-based data semantic management and application is proposed in this paper. Based on a smart home system model abstracted from the perspective of implementing users’ household operations, a general domain ontology model is designed by defining the correlative concepts, and a logical data semantic fusion model is designed accordingly. Subsequently, to achieve high-efficiency ontology data query and update in the implementation of the data semantic fusion model, a relational-database-based ontology data decomposition storage method is developed by thoroughly investigating existing storage modes, and the performance is demonstrated using a group of elaborated ontology data query and update operations. Comprehensively utilizing the stated achievements, ontology-based semantic reasoning with a specially designed semantic matching rule is studied as well in this work in an attempt to provide accurate and personalized home services, and the efficiency is demonstrated through experiments conducted on the developed testing system for user behavior reasoning
Reducing risk in pre-production investigations through undergraduate engineering projects.
This poster is the culmination of final year Bachelor of Engineering Technology (B.Eng.Tech) student projects
in 2017 and 2018. The B.Eng.Tech is a level seven qualification that aligns with the Sydney accord for a three-year engineering degree and hence is internationally benchmarked. The enabling mechanism of these projects is the industry connectivity that creates real-world projects and highlights the benefits of the investigation of process at the technologist level.
The methodologies we use are basic and transparent, with enough depth of technical knowledge to ensure the industry partners gain from the collaboration process. The process we use minimizes the disconnect between the student and the industry supervisor while maintaining the academic freedom of the student and the commercial sensitivities of the supervisor.
The general motivation for this approach is the reduction of the entry cost of the industry to enable consideration of new technologies and thereby reducing risk to core business and shareholder profits.
The poster presents several images and interpretive dialogue to explain the positive and negative aspects of the student process
- …