A survey of digital television broadcast transmission techniques

This paper is a survey of the transmission techniques used in digital television (TV) standards worldwide. With the increase in the demand for High-Definition (HD) TV, video-on-demand and mobile TV services, there was a real need for more bandwidth-efficient, flawless and crisp video quality, which motivated the migration from analogue to digital broadcasting. In this paper we present a brief history of the development of TV and then we survey the transmission technology used in different digital terrestrial, satellite, cable and mobile TV standards in different parts of the world. First, we present the Digital Video Broadcasting standards developed in Europe for terrestrial (DVB-T/T2), for satellite (DVB-S/S2), for cable (DVB-C) and for hand-held transmission (DVB-H). We then describe the Advanced Television System Committee standards developed in the USA both for terrestrial (ATSC) and for hand-held transmission (ATSC-M/H). We continue by describing the Integrated Services Digital Broadcasting standards developed in Japan for Terrestrial (ISDB-T) and Satellite (ISDB-S) transmission and then present the International System for Digital Television (ISDTV), which was developed in Brazil by adopteding the ISDB-T physical layer architecture. Following the ISDTV, we describe the Digital Terrestrial television Multimedia Broadcast (DTMB) standard developed in China. Finally, as a design example, we highlight the physical layer implementation of the DVB-T2 standar

MBMS—IP Multicast/Broadcast in 3G Networks

In this article, the Multimedia Broadcast and Multicast Service (MBMS) as standardized in 3GPP is presented. With MBMS, multicast and broadcast capabilities are introduced into cellular networks. After an introduction into MBMS technology, MBMS radio bearer realizations are presented. Different MBMS bearer services like broadcast mode, enhanced broadcast mode and multicast mode are discussed. Streaming and download services over MBMS are presented and supported media codecs are listed. Service layer components as defined in Open Mobile Alliance (OMA) are introduced. For a Mobile TV use case capacity improvements achieved by MBMS are shown. Finally, evolution of MBMS as part of 3GPP standardization is presented

Adaptive subframe allocation for next generation multimedia delivery over hybrid LTE unicast broadcast

The continued global roll-out of long term evolution (LTE) networks is providing mobile users with perpetually increasing ubiquitous access to a rich selection of high quality multimedia. Interactive viewing experiences including 3-D or free-viewpoint video require the synchronous delivery of multiple video streams. This paper presents a novel hybrid unicast broadcast synchronisation (HUBS) framework to synchronously deliver multi-stream content. Previous techniques on hybrid LTE implementations include staggered modulation and coding scheme grouping, adaptive modulation coding or implementing error recover techniques; the work presented here instead focuses on dynamic allocation of resources between unicast and broadcast, improving stream synchronisation as well as overall cell resource usage. Furthermore, the HUBS framework has been developed to work within the limitations imposed by the LTE specification. Performance evaluation of the framework is performed through the simulation of probable future scenarios, where a popular live event is broadcast with stereo 3-D or multi-angle companion views interactively offered to capable users. The proposed framework forms a ``HUBS group'' that monitors the radio bearer queues to establish a time lead or lag between broadcast and unicast streams. Since unicast and broadcast share the same radio resources, the number of subframes allocated to the broadcast transmission are then dynamically increased or decreased to minimise the average lead/lag time offset between the streams. Dynamic allocation showed improvements for all services across the cell, whilst keeping streams synchronised despite increased user loading

A two-way interactive broadband satellite architecture to break the digital divide barrier

September 24-26, 2007, Turin, Ital

TV-Centric technologies to provide remote areas with two-way satellite broadband access

October 1-2, 2007, Rome, Italy TV-Centric Technologies To Provide Remote Areas With Two-Way Satellite Broadband Acces

A Novel Local and Hyper-Local Multicast Services Transmission Scheme for Beyond 5G Networks

The efficiency of the broadcast network is impacted by the different types of services that may be transmitted over it. Global services serve users across the entire network, while local services cater to specific regions, and hyper-local services have even narrower coverage. Multimedia Broadcast over a Single-Frequency Network (MBSFN) is typically used for global service transmission while existing literature extensively discusses schemes for transmitting local or hyper-local services with or without Single Frequency Network (SFN) gain. However, these schemes fall short when network-wide requests for only local and hyper-local services are made, leading operators to scale down to either Single Cell-Point to Multipoint (SCPtM) or Multi-Frequency Network (MFN). SCPtM is highly susceptible to interference, and MFN requires substantial amounts of valuable spectrum. They both employ the Least Channel Gain (LCG) strategy for transmitting hyper-local services without SFN gain. Our proposed Local and Hyper-Local Services (LHS) transmission scheme utilizes the knowledge of user distribution and their corresponding radio link channel quality to schedule single or multi-resolution, local or hyper-local services within a three-cell cluster and aims to enhance spectral efficiency and maximize system throughput. It leverages Scalable Video Coding (SVC) in conjunction with Hierarchical Modulation (HM) for transmitting multi-resolution multimedia content to address the problem of heterogeneity amongst the multicast group users. The proposed scheme also employs macro-diversity combining with optimal HM parameters for each gNB catering to a local service area in order to minimize the service outage. System-level simulation results testify to the better performance achieved by the proposed LHS transmission scheme with respect to SCPtM.Comment: 12 pages, 18 figures, 2 tables, 3 algorithm

On Transmission System Design for Wireless Broadcasting

This thesis considers aspects related to the design and standardisation of transmission systems for wireless broadcasting, comprising terrestrial and mobile reception. The purpose is to identify which factors influence the technical decisions and what issues could be better considered in the design process in order to assess different use cases, service scenarios and end-user quality. Further, the necessity of cross-layer optimisation for efficient data transmission is emphasised and means to take this into consideration are suggested. The work is mainly related terrestrial and mobile digital video broadcasting systems but many of the findings can be generalised also to other transmission systems and design processes. The work has led to three main conclusions. First, it is discovered that there are no sufficiently accurate error criteria for measuring the subjective perceived audiovisual quality that could be utilised in transmission system design. Means for designing new error criteria for mobile TV (television) services are suggested and similar work related to other services is recommended. Second, it is suggested that in addition to commercial requirements there should be technical requirements setting the frame work for the design process of a new transmission system. The technical requirements should include the assessed reception conditions, technical quality of service and service functionalities. Reception conditions comprise radio channel models, receiver types and antenna types. Technical quality of service consists of bandwidth, timeliness and reliability. Of these, the thesis focuses on radio channel models and errorcriteria (reliability) as two of the most important design challenges and provides means to optimise transmission parameters based on these. Third, the thesis argues that the most favourable development for wireless broadcasting would be a single system suitable for all scenarios of wireless broadcasting. It is claimed that there are no major technical obstacles to achieve this and that the recently published second generation digital terrestrial television broadcasting system provides a good basis. The challenges and opportunities of a universal wireless broadcasting system are discussed mainly from technical but briefly also from commercial and regulatory aspectSiirretty Doriast