Oxidation-resistant reflective surfaces for solar dynamic power generation in near Earth orbit

Reflective surfaces for space station power generation systems are required to withstand the atomic oxygen-dominated environment of near Earth orbit. Thin films of platinum and rhodium, which are corrosion resistant reflective metals, have been deposited by ion beam sputter deposition onto various substrate materials. Solar reflectances were then measured as a function of time of exposure to a RF-generated air plasma. Similarly, various protective coating materials, including MgF2, SiO2, Al2O3, and Si3N4, were deposited onto silver-coated substrates and then exposed to the plasma. Analysis of the films both before and after exposure by both ESCA and Auger spectroscopy was also performed. The results indicate that Pt and Rh do not suffer any loss in reflectance over the duration of the tests. Also, each of the coating materials survived the plasma environment. The ESCA and Auger analyses are discussed as well

Glass in the submarine section of the HSDP2 drill core, Hilo, Hawaii

The Hawaii Scientific Drilling Project recovered ~3 km of basalt by coring into the flank of Mauna Kea volcano at Hilo, Hawaii. Rocks recovered from deeper than ~1 km were deposited below sea level and contain considerable fresh glass. We report electron microprobe analyses of 531 glasses from the submarine section of the core, providing a high-resolution record of petrogenesis over ca. 200 Kyr of shield building of a Hawaiian volcano. Nearly all the submarine glasses are tholeiitic. SiO2 contents span a significant range but are bimodally distributed, leading to the identification of low-SiO2 and high-SiO2 magma series that encompass most samples. The two groups are also generally distinguishable using other major and minor elements and certain isotopic and incompatible trace element ratios. On the basis of distributions of high- and low-SiO2 glasses, the submarine section of the core is divided into four zones. In zone 1 (1079–~1950 mbsl), most samples are degassed high-SiO2 hyaloclastites and massive lavas, but there are narrow intervals of low-SiO2 hyaloclastites. Zone 2 (~1950–2233 mbsl), a zone of degassed pillows and hyaloclastites, displays a continuous decrease in silica content from bottom to top. In zone 3 (2233–2481 mbsl), nearly all samples are undegassed low-SiO2 pillows. In zone 4 (2481–3098 mbsl), samples are mostly high-SiO2 undegassed pillows and degassed hyaloclastites. This zone also contains most of the intrusive units in the core, all of which are undegassed and most of which are low-SiO2. Phase equilibrium data suggest that parental magmas of the low-SiO2 suite could be produced by partial melting of fertile peridotite at 30–40 kbar. Although the high-SiO2 parents could have equilibrated with harzburgite at 15–20 kbar, they could have been produced neither simply by higher degrees of melting of the sources of the low-SiO2 parents nor by mixing of known dacitic melts of pyroxenite/eclogite with the low-SiO2 parents. Our hypothesis for the relationship between these magma types is that as the low-SiO2 magmas ascended from their sources, they interacted chemically and thermally with overlying peridotites, resulting in dissolution of orthopyroxene and clinopyroxene and precipitation of olivine, thereby generating high-SiO2 magmas. There are glasses with CaO, Al2O3, and SiO2 contents slightly elevated relative to most low-SiO2 samples; we suggest that these differences reflect involvement of pyroxene-rich lithologies in the petrogenesis of the CaO-Al2O3-enriched glasses. There is also a small group of low-SiO2 glasses distinguished by elevated K2O and CaO contents; the sources of these samples may have been enriched in slab-derived fluid/melts. Low-SiO2 glasses from the top of zone 3 (2233–2280 mbsl) are more alkaline, more fractionated, and incompatible-element-enriched relative to other glasses from zone 3. This excursion at the top of zone 3, which is abruptly overlain by more silica-rich tholeiitic magmas, is reminiscent of the end of Mauna Kea shield building higher in the core

Tunnel spin polarization of Ni80Fe20/SiO2 probed with a magnetic tunnel transistor

The tunnel spin polarization of Ni80Fe20/SiO2 interfaces has been investigated using a magnetic tunnel transistor (MTT). The MTT with a Ni80Fe20/SiO2 emitter shows a magnetocurrent of 74% at 100 K, corresponding to a tunnel spin polarization of the Ni80Fe20/SiO2 interface of 27%. This is only slightly lower than the value of 34% for Ni80Fe20/Al2O3 interfaces determined in similar MTT structures. This suggests that SiO2 can be applied in semiconductor spintronic devices, for example in ferromagnet/SiO2/Si tunnel contacts for spin injection.\ud \u

Overview of the sensitivity of Ge- and Al-doped silicon dioxide optical fibres to ionizing radiation

This paper reviews the thermoluminescence sensitivity of Ge- and Al- doped SiO2 optical fibre subjected to various ionizing radiations. It is found that the Ge- doped SiO2 optical fiber has the thermoluminescence response superior to Al-doped SiO2 optical fibre at certain energy and dose range in alpha, beta, photon and electron irradiation. High thermoluminescence intensity per unit dose goes to photon and electron irradiation than alpha and beta irradiation of lower energy. This probably due to the linear energy transfer that influence the dose deposition in the material as incident ionizing radiation striking the surface of Ge- and Al- doped SiO2 optical fibre. However, both doped SiO2 optical fibres show good linearity at studied dose range. It has been proven by researchers providing great potential as a dose absorbed measuring devices especially in radiotherapy energy and dose rang

Origin of the n-type and p-type conductivity of MoS2 monolayers on a SiO2 substrate

Ab-initio density functional theory calculations are performed to study the electronic properties of a MoS2 monolayer deposited over a SiO2 substrate in the presence of interface impurities and defects. When MoS2 is placed on a defect-free substrate the oxide plays an insignificant role, since the conduction band top and the valence band minimum of MoS2 are located approximately in the middle of the SiO2 band-gap. However, if Na impurities and O dangling bonds are introduced at the SiO2 surface, these lead to localized states, which modulate the conductivity of the MoS2 monolayer from n- to p-type. Our results show that the conductive properties of MoS2 deposited on SiO2 are mainly determined by the detailed structure of the MoS2 /SiO2 interface, and suggest that doping the substrate can represent a viable strategy for engineering MoS2 -based devices.Comment: 8 pages, 7 figure

Improved graphene blisters by ultrahigh pressure sealing

Graphene is a very attractive material for nanomechanical devices and membrane applications. Graphene blisters based on silicon oxide micro-cavities are a simple but relevant example of nanoactuators. A drawback of this experimental set up is that gas leakage through the graphene-SiO2 interface contributes significantly to the total leak rate. Here we study the diffusion of air from pressurized graphene drumheads on SiO2 micro-cavities and propose a straightforward method to improve the already strong adhesion between graphene and the underlying SiO2 substrate, resulting in reduced leak rates. This is carried out by applying controlled and localized ultrahigh pressure (> 10 GPa) with an Atomic Force Microscopy diamond tip. With this procedure, we are able to significantly approach the graphene layer to the SiO2 surface around the drumheads, thus enhancing the interaction between them allowing us to better seal the graphene-SiO2 interface, which is reflected in up to ~ 4 times lower leakage rates. Our work opens an easy way to improve the performance of graphene as a gas membrane on a technological relevant substrate such as SiO2.Comment: pages 19, 4 figures + supplementary informatio

Microstructural properties of non-supported microporous ceramic membrane top-layers obtained by the sol-gel process

Dried and calcined non-supported membrane top-layers of SiO2, SiO2/TiO2, SiO2/ZrO2 (10, 20 and 30 mol% TiO2 and ZrO2, respectively) and SiO2/Al2O3 (10 mol% AlO1.5) were prepared using acid catalyzed hydrolysis and condensation of alkoxides in ethanol. The microstructure was determined using nitrogen physisorption. The modified Horváth-Kawazoe model for nitrogen adsorption in cylindrical pores was used for pore size assessment. SiO2 non-supported membrane top layers were 100% microporous with an average porosity of 30¿37%, depending on drying conditions. The bimodal pore size distribution shows a maximum at an effective pore diameter of 0.5 nm, and a broader tail with a weaker maximum around 0.75 nm. Microporous non-supported binary systems can be prepared with porosities between 15 and 40%. The high reactivity of the Ti, Zr, Al-alkoxides requires carefully chosen conditions. Too much water results in dense materials. The pore size distributions (PSDs) of the binary systems resemble the PSDs for silica

Defects in SiO2 as the possible origin of near interface traps in the SiC∕SiO2 system: A systematic theoretical study

A systematic study of the level positions of intrinsic and carbon defects in SiO2 is presented, based on density functional calculations with a hybrid functional in an alpha-quartz supercell. The results are analyzed from the point of view of the near interface traps (NIT), observed in both SiC/SiO2 and Si/SiO2 systems, and assumed to have their origins in the oxide. It is shown that the vacancies and the oxygen interstitial can be excluded as the origin of such NIT, while the silicon interstitial and carbon dimers give rise to gap levels in the energy range inferred from experiments. The properties of these defects are discussed in light of the knowledge about the SiC/SiO2 interface

Surface modification of an Al2O3/SiO2 based ceramic treated with CO2, Nd:YAG, excimer and high power diode lasers for altered wettability characteristics

Interaction of CO2, Nd:YAG, excimer and high power diode laser (HPDL) radiation with the surface of an Al2O3/SiO2 based ceramic was found to affect significant changes in the wettability characteristics of the material. It was observed that interaction with CO2, Nd:YAG and HPDL radiation reduced the enamel contact angle from 1180 to 310, 340 and 330 respectively. In contrast, interaction with excimer laser radiation resulted an increase in the contact angle to 1210. Such changes were identified as being due to: (i) the melting and partial vitrification of the Al2O3/SiO2 based ceramic surface as a result of interaction with CO2, Nd:YAG HPDL radiation. (ii) the surface roughness of the Al2O3/SiO2 based ceramic increasing after interaction with excimer laser radiation. (iii) the relative surface oxygen content of the Al2O3/SiO2 based ceramic increasing after interaction with CO2, Nd:YAG and HPDL radiation. The work has shown that the wettability characteristics of the Al2O3/SiO2 based ceramic could be controlled and/or modified with laser surface treatment. Moreover, it was found that changes in the wettability characteristics of the Al2O3/SiO2 based ceramic are related to the effects of laser wavelength, that is whether the wavelength of the laser radiation has the propensity to cause surface melting

Ternary biogenic silica/magnetite/graphene oxide composite for the hyperactivation of Candida rugosa lipase in the esterification production of ethyl valerate

Oil palm leaves (OPL) silica (SiO2) can replace the energy-intensive, commercially produced SiO2. Moreover, the agronomically sourced biogenic SiO2 is more biocompatible and cost-effective enzyme support, which properties could be improved by the addition of magnetite (Fe3O4) and graphene oxide (GO) to yield better ternary support to immobilize enzymes, i.e., Candida rugosa lipase (CRL). This study aimed to optimize the Candida rugosa lipase (CRL immobilization onto the ternary OPL-silica-magnetite (Fe3O4)-GO (SiO2/Fe3O4/GO) support, for use as biocatalyst for ethyl valerate (EV) production. Notably, this is the first study detailing the CRL/SiO2/Fe3O4/GO biocatalyst preparation for rapid and high yield production of ethyl valerate (EV). AFM and FESEM micrographs revealed globules of CRL covalently bound to GL-A-SiO2/Fe3O4/GO; similar to Raman and UV–spectroscopy results. FTIR spectra revealed amide bonds at 3478 cm–1 and 1640 cm–1 from covalent interactions between CRL and GL-A-SiO2/Fe3O4/GO. Optimum immobilization conditions were 4% (v/v) glutaraldehyde, 8 mg/mL CRL, at 16 h stirring in 150 mM NaCl at 30 °C, offering 24.78 ± 0.26 mg/g protein (specific activity = 65.24 ± 0.88 U/g). The CRL/SiO2/Fe3O4/GO yielded 77.43 ± 1.04 % of EV compared to free CRL (48.75 ± 0.70 %), verifying the suitability of SiO2/Fe3O4/GO to hyperactivate and stabilize CRL for satisfactory EV production