FM-based indoor localization

ABSTRACT The major challenge for accurate fingerprint-based indoor localization is the design of robust and discriminative wireless signatures. Even though WiFi RSSI signatures are widely available indoors, they vary significantly over time and are susceptible to human presence, multipath, and fading due to the high operating frequency. To overcome these limitations, we propose to use FM broadcast radio signals for robust indoor fingerprinting. Because of the lower frequency, FM signals are less susceptible to human presence, multipath and fading, they exhibit exceptional indoor penetration, and according to our experimental study they vary less over time when compared to WiFi signals. In this work, we demonstrate through a detailed experimental study in 3 different buildings across the US, that FM radio signal RSSI values can be used to achieve roomlevel indoor localization with similar or better accuracy to the one achieved by WiFi signals. Furthermore, we propose to use additional signal quality indicators at the physical layer (i.e., SNR, multipath etc.) to augment the wireless signature, and show that localization accuracy can be further improved by more than 5%. More importantly, we experimentally demonstrate that the localization errors of FM and WiFi signals are independent. When FM and WiFi signals are combined to generate wireless fingerprints, the localization accuracy increases as much as 83% (when accounting for wireless signal temporal variations) compared to when WiFi RSSI only is used as a signature

A Robust Zero-Calibration RF-based Localization System for Realistic Environments

Due to the noisy indoor radio propagation channel, Radio Frequency (RF)-based location determination systems usually require a tedious calibration phase to construct an RF fingerprint of the area of interest. This fingerprint varies with the used mobile device, changes of the transmit power of smart access points (APs), and dynamic changes in the environment; requiring re-calibration of the area of interest; which reduces the technology ease of use. In this paper, we present IncVoronoi: a novel system that can provide zero-calibration accurate RF-based indoor localization that works in realistic environments. The basic idea is that the relative relation between the received signal strength from two APs at a certain location reflects the relative distance from this location to the respective APs. Building on this, IncVoronoi incrementally reduces the user ambiguity region based on refining the Voronoi tessellation of the area of interest. IncVoronoi also includes a number of modules to efficiently run in realtime as well as to handle practical deployment issues including the noisy wireless environment, obstacles in the environment, heterogeneous devices hardware, and smart APs. We have deployed IncVoronoi on different Android phones using the iBeacons technology in a university campus. Evaluation of IncVoronoi with a side-by-side comparison with traditional fingerprinting techniques shows that it can achieve a consistent median accuracy of 2.8m under different scenarios with a low beacon density of one beacon every 44m2. Compared to fingerprinting techniques, whose accuracy degrades by at least 156%, this accuracy comes with no training overhead and is robust to the different user devices, different transmit powers, and over temporal changes in the environment. This highlights the promise of IncVoronoi as a next generation indoor localization system.Comment: 9 pages, 13 figures, published in SECON 201