Fast converging robust beamforming for downlink massive MIMO systems in heterogenous networks

Massive multiple-input multiple-output (MIMO) is an emerging technology, which is an enabler for future broadband wireless networks that support high speed connection of densely populated areas. Application of massive MIMO at the macrocell base stations in heterogeneous networks (HetNets) offers an increase in throughput without increasing the bandwidth, but with reduced power consumption. This research investigated the optimisation problem of signal-to-interference-plus-noise ratio (SINR) balancing for macrocell users in a typical HetNet scenario with massive MIMO at the base station. The aim was to present an efficient beamforming solution that would enhance inter-tier interference mitigation in heterogeneous networks. The system model considered the case of perfect channel state information (CSI) acquisition at the transmitter, as well as the case of imperfect CSI at the transmitter. A fast converging beamforming solution, which is applicable to both channel models, is presented. The proposed beamforming solution method applies the matrix stuffing technique and the alternative direction method of multipliers, in a two-stage fashion, to give a modestly accurate and efficient solution. In the first stage, the original optimisation problem is transformed into standard second-order conic program (SOCP) form using the Smith form reformulation and applying the matrix stuffing technique for fast transformation. The second stage uses the alternative direction method of multipliers to solve the SOCP-based optimisation problem. Simulations to evaluate the SINR performance of the proposed solution method were carried out with supporting software-based simulations using relevant MATLAB toolboxes. The simulation results of a typical single cell in a HetNet show that the proposed solution gives performance with modest accuracy, while converging in an efficient manner, compared to optimal solutions achieved by state-of-the-art modelling languages and interior-point solvers. This is particularly for cases when the number of antennas at the base station increases to large values, for both models of perfect CSI and imperfect CSI. This makes the solution method attractive for practical implementation in heterogeneous networks with large scale antenna arrays at the macrocell base station.Dissertation (MEng)--University of Pretoria, 2018.Electrical, Electronic and Computer EngineeringMEngUnrestricte

Robust Channel Estimation in Multiuser Downlink 5G Systems Under Channel Uncertainties

In wireless communication, the performance of the network highly relies on the accuracy of channel state information (CSI). On the other hand, the channel statistics are usually unknown, and the measurement information is lost due to the fading phenomenon. Therefore, we propose a channel estimation approach for downlink communication under channel uncertainty. We apply the Tobit Kalman filter (TKF) method to estimate the hidden state vectors of wireless channels. To minimize the maximum estimation error, a robust minimax minimum estimation error (MSE) estimation approach is developed while the QoS requirements of wireless users is taken into account. We then formulate the minimax problem as a non-cooperative game to find an optimal filter and adjust the best behavior for the worst-case channel uncertainty. We also investigate a scenario in which the actual operating point is not exactly known under model uncertainty. Finally, we investigate the existence and characterization of a saddle point as the solution of the game. Theoretical analysis verifies that our work is robust against the uncertainty of the channel statistics and able to track the true values of the channel states. Additionally, simulation results demonstrate the superiority of the model in terms of MSE value over related techniques

Thirty Years of Machine Learning: The Road to Pareto-Optimal Wireless Networks

Future wireless networks have a substantial potential in terms of supporting a broad range of complex compelling applications both in military and civilian fields, where the users are able to enjoy high-rate, low-latency, low-cost and reliable information services. Achieving this ambitious goal requires new radio techniques for adaptive learning and intelligent decision making because of the complex heterogeneous nature of the network structures and wireless services. Machine learning (ML) algorithms have great success in supporting big data analytics, efficient parameter estimation and interactive decision making. Hence, in this article, we review the thirty-year history of ML by elaborating on supervised learning, unsupervised learning, reinforcement learning and deep learning. Furthermore, we investigate their employment in the compelling applications of wireless networks, including heterogeneous networks (HetNets), cognitive radios (CR), Internet of things (IoT), machine to machine networks (M2M), and so on. This article aims for assisting the readers in clarifying the motivation and methodology of the various ML algorithms, so as to invoke them for hitherto unexplored services as well as scenarios of future wireless networks.Comment: 46 pages, 22 fig

D13.2 Techniques and performance analysis on energy- and bandwidth-efficient communications and networking

Deliverable D13.2 del projecte europeu NEWCOM#The report presents the status of the research work of the various Joint Research Activities (JRA) in WP1.3 and the results that were developed up to the second year of the project. For each activity there is a description, an illustration of the adherence to and relevance with the identified fundamental open issues, a short presentation of the main results, and a roadmap for the future joint research. In the Annex, for each JRA, the main technical details on specific scientific activities are described in detail.Peer ReviewedPostprint (published version

Cloud Based Small Cell Networks: System Model, Performance Analysis and Resource Allocation

In cloud-based small cell networks (C-SCNs), radio resource allocation at the base station (BS) is moved to a cloud data centre for centralised optimisation. In the centre, multiple processors referred to as the cloud computational unit (CCU), is used for the optimisation. As the cell size and networks become respectively smaller and denser, the number of BSs to be optimised grows exponentially, resulting in high computational complexity and latency at CCUs. This thesis propose belief propagation (BP) based power allocation schemes for C-SCNs that can be used for any network optimisation objectives such as energy efficiency at the centre and BSs; and spectral efficiency (SE). The computation for the schemes is done in parallel, leading to very low latency and computational complexity with increasing number of BSs. The transmission-latency depends on the number of bits used to quantise the received signal from terminals at the remote radio head (RRH). The computational-latency depend on the speed of resource allocation procedure at the CCU. BP based joint SE and latency optimisation scheme that compute the optimum terminal’s uplink power and number of quantisation bits for each RRHs. The results indicate a significant reduction in transmission and computational-latencies compared to other schemes. This thesis further investigates a user association (UA) to the BS and subcarrier allocation (SCA) where a BS allocates different number of SC to different users associated to it. In jointly optimising the UA and SCA, the Sharpe Ratio (SR) is used as the utility function, which is defined as the ratio between the mean of user achievable rates to its standard deviation. Thus, the achieved user rates will be closer to each other, leading to a fair network access. By using binary BP algorithm, the results show that the achievable user rates are doubled in comparison with other schemes

Planning Wireless Cellular Networks of Future: Outlook, Challenges and Opportunities

Cell planning (CP) is the most important phase in the life cycle of a cellular system as it determines the operational expenditure, capital expenditure, as well as the long-term performance of the system. Therefore, it is not surprising that CP problems have been studied extensively for the past three decades for all four generations of cellular systems. However, the fact that small cells, a major component of future networks, are anticipated to be deployed in an impromptu fashion makes CP for future networks vis-a-vis 5G a conundrum. Furthermore, in emerging cellular systems that incorporate a variety of different cell sizes and types, heterogeneous networks (HetNets), energy efficiency, self-organizing network features, control and data plane split architectures (CDSA), massive multiple input multiple out (MIMO), coordinated multipoint (CoMP), cloud radio access network, and millimetre-wave-based cells plus the need to support Internet of Things (IoT) and device-to-device (D2D) communication require a major paradigm shift in the way cellular networks have been planned in the past. The objective of this paper is to characterize this paradigm shift by concisely reviewing past developments, analyzing the state-of-the-art challenges, and identifying future trends, challenges, and opportunities in CP in the wake of 5G. More specifically, in this paper, we investigate the problem of planning future cellular networks in detail. To this end, we first provide a brief tutorial on the CP process to identify the peculiarities that make CP one of the most challenging problems in wireless communications. This tutorial is followed by a concise recap of past research in CP. We then review key findings from recent studies that have attempted to address the aforementioned challenges in planning emerging networks. Finally, we discuss the range of technical factors that need to be taken into account while planning future networks and the promising research directions that necessitates the paradigm shift to do so

Next-Generation Environment-Aware Cellular Networks: Modern Green Techniques and Implementation Challenges

Over the last decade, mobile communications have been witnessing a noteworthy increase of data traffic demand that is causing an enormous energy consumption in cellular networks. The reduction of their fossil fuel consumption in addition to the huge energy bills paid by mobile operators is considered as the most important challenges for the next-generation cellular networks. Although most of the proposed studies were focusing on individual physical layer power optimizations, there is a growing necessity to meet the green objective of fifth-generation cellular networks while respecting the user's quality of service. This paper investigates four important techniques that could be exploited separately or together in order to enable wireless operators achieve