9,523 research outputs found
Self-Motions of General 3-RPR Planar Parallel Robots
This paper studies the kinematic geometry of general 3-RPR planar parallel
robots with actuated base joints. These robots, while largely overlooked, have
simple direct kinematics and large singularity-free workspace. Furthermore,
their kinematic geometry is the same as that of a newly developed parallel
robot with SCARA-type motions. Starting from the direct and inverse kinematic
model, the expressions for the singularity loci of 3-RPR planar parallel robots
are determined. Then, the global behaviour at all singularities is
geometrically described by studying the degeneracy of the direct kinematic
model. Special cases of self-motions are then examined and the degree of
freedom gained in such special configurations is kinematically interpreted.
Finally, a practical example is discussed and experimental validations
performed on an actual robot prototype are presented
Learning Singularity Avoidance
With the increase in complexity of robotic systems and the rise in non-expert
users, it can be assumed that task constraints are not explicitly known. In
tasks where avoiding singularity is critical to its success, this paper
provides an approach, especially for non-expert users, for the system to learn
the constraints contained in a set of demonstrations, such that they can be
used to optimise an autonomous controller to avoid singularity, without having
to explicitly know the task constraints. The proposed approach avoids
singularity, and thereby unpredictable behaviour when carrying out a task, by
maximising the learnt manipulability throughout the motion of the constrained
system, and is not limited to kinematic systems. Its benefits are demonstrated
through comparisons with other control policies which show that the constrained
manipulability of a system learnt through demonstration can be used to avoid
singularities in cases where these other policies would fail. In the absence of
the systems manipulability subject to a tasks constraints, the proposed
approach can be used instead to infer these with results showing errors less
than 10^-5 in 3DOF simulated systems as well as 10^-2 using a 7DOF real world
robotic system
Design of Calibration Experiments for Identification of Manipulator Elastostatic Parameters
The paper is devoted to the elastostatic calibration of industrial robots,
which is used for precise machining of large-dimensional parts made of
composite materials. In this technological process, the interaction between the
robot and the workpiece causes essential elastic deflections of the manipulator
components that should be compensated by the robot controller using relevant
elastostatic model of this mechanism. To estimate parameters of this model, an
advanced calibration technique is applied that is based on the non-linear
experiment design theory, which is adopted for this particular application. In
contrast to previous works, it is proposed a concept of the user-defined
test-pose, which is used to evaluate the calibration experiments quality. In
the frame of this concept, the related optimization problem is defined and
numerical routines are developed, which allow generating optimal set of
manipulator configurations and corresponding forces/torques for a given number
of the calibration experiments. Some specific kinematic constraints are also
taken into account, which insure feasibility of calibration experiments for the
obtained configurations and allow avoiding collision between the robotic
manipulator and the measurement equipment. The efficiency of the developed
technique is illustrated by an application example that deals with elastostatic
calibration of the serial manipulator used for robot-based machining.Comment: arXiv admin note: substantial text overlap with arXiv:1211.573
Method and apparatus for configuration control of redundant robots
A method and apparatus to control a robot or manipulator configuration over the entire motion based on augmentation of the manipulator forward kinematics is disclosed. A set of kinematic functions is defined in Cartesian or joint space to reflect the desirable configuration that will be achieved in addition to the specified end-effector motion. The user-defined kinematic functions and the end-effector Cartesian coordinates are combined to form a set of task-related configuration variables as generalized coordinates for the manipulator. A task-based adaptive scheme is then utilized to directly control the configuration variables so as to achieve tracking of some desired reference trajectories throughout the robot motion. This accomplishes the basic task of desired end-effector motion, while utilizing the redundancy to achieve any additional task through the desired time variation of the kinematic functions. The present invention can also be used for optimization of any kinematic objective function, or for satisfaction of a set of kinematic inequality constraints, as in an obstacle avoidance problem. In contrast to pseudoinverse-based methods, the configuration control scheme ensures cyclic motion of the manipulator, which is an essential requirement for repetitive operations. The control law is simple and computationally very fast, and does not require either the complex manipulator dynamic model or the complicated inverse kinematic transformation. The configuration control scheme can alternatively be implemented in joint space
The dynamic control of robotic manipulators in space
Described briefly is the work done during the first half year of a three-year study on dynamic control of robotic manipulators in space. The research focused on issues for advanced control of space manipulators including practical issues and new applications for the Virtual Manipulator. In addition, the development of simulations and graphics software for space manipulators, begun during the first NASA proposal in the area, has continued. The fabrication of the Vehicle Emulator System (VES) is completed and control algorithms are in process of development
A spatial impedance controller for robotic manipulation
Mechanical impedance is the dynamic generalization of stiffness, and determines interactive behavior by definition. Although the argument for explicitly controlling impedance is strong, impedance control has had only a modest impact on robotic manipulator control practice. This is due in part to the fact that it is difficult to select suitable impedances given tasks. A spatial impedance controller is presented that simplifies impedance selection. Impedance is characterized using ¿spatially affine¿ families of compliance and damping, which are characterized by nonspatial and spatial parameters. Nonspatial parameters are selected independently of configuration of the object with which the robot must interact. Spatial parameters depend on object configurations, but transform in an intuitive, well-defined way. Control laws corresponding to these compliance and damping families are derived assuming a commonly used robot model. While the compliance control law was implemented in simulation and on a real robot, this paper emphasizes the underlying theor
Modelling of the gravity compensators in robotic manufacturing cells
The paper deals with the modeling and identification of the gravity
compensators used in heavy industrial robots. The main attention is paid to the
geometrical parameters identification and calibration accuracy. To reduce
impact of the measurement errors, the design of calibration experiments is
used. The advantages of the developed technique are illustrated by experimental
result
- …