Qualitative model-based diagnostics for rocket systems

A diagnostic software package is currently being developed at NASA LeRC that utilizes qualitative model-based reasoning techniques. These techniques can provide diagnostic information about the operational condition of the modeled rocket engine system or subsystem. The diagnostic package combines a qualitative model solver with a constraint suspension algorithm. The constraint suspension algorithm directs the solver's operation to provide valuable fault isolation information about the modeled system. A qualitative model of the Space Shuttle Main Engine's oxidizer supply components was generated. A diagnostic application based on this qualitative model was constructed to process four test cases: three numerical simulations and one actual test firing. The diagnostic tool's fault isolation output compared favorably with the input fault condition

Model-based sensor supervision inland navigation networks: Cuinchy-Fontinettes case study

In recent years, inland navigation networks benefit from the innovation of the instrumentation and SCADA systems. These data acquisition and control systems lead to the improvement of the manage- ment of these networks. Moreover, they allow the implementation of more accurate automatic control to guarantee the navigation requirements. However, sensors and actuators are subject to faults due to the strong effects of the environment, aging, etc. Thus, before implementing automatic control strate- gies that rely on the fault-free mode, it is necessary to design a fault diagnosis scheme. This fault diagnosis scheme has to detect and isolate possible faults in the system to guarantee fault-free data and the efficiency of the automatic control algorithms. Moreover, the proposed supervision scheme could predict future incipient faults that are necessary to perform predictive maintenance of the equipment. In this paper, a general architecture of sensor fault detection and isolation using model-based approaches will be proposed for inland navigation networks. The proposed approach will be particularized for the Cuinchy-Fontinettes reach located in the north of France. The preliminary results show the effectiveness of the proposed fault diagnosis methodologies using a realistic simulator and fault scenarios.In recent years, inland navigation networks bene¿t from the innovation of the instrumentation and SCADA systems. These data acquisition and control systems lead to the improvement of the management of these networks. Moreover, they allow the implementation of more accurate automatic control to guarantee the navigation requirements. However, sensors and actuators are subject to faults due to the strong effects of the environment, aging, etc. Thus, before implementing automatic control strategies that rely on the fault-free mode, it is necessary to design a fault diagnosis scheme. This fault diagnosis scheme has to detect and isolate possible faults in the system to guarantee fault-free data and the efficiency of the automatic control algorithms. Moreover, the proposed supervision scheme could predict future incipient faults that are necessary to perform predictive maintenance of the equipment. In this paper, a general architecture of sensor fault detection and isolation using model-based approaches will be proposed for inland navigation networks. The proposed approach will be particularized for the Cuinchy-Fontinettes reach located in the north of France. The preliminary results show the effectiveness of the proposed fault diagnosis methodologies using a realistic simulator and fault scenarios.Peer ReviewedPostprint (author's final draft

Process: program for research on operator control in an experimental simulated setting

An experimental tool for the investigation of human control behavior of slowly responding dynamic systems is described. Process (Program for Research on Operator Control in an Experimental Simulated Setting) is a simulation of a dynamic water-alcohol distillation system that is especially useful in research on operator training. In particular, Process was developed to conduct research on fault management skill

Multi-agent framework based on smart sensors/actuators for machine tools control and monitoring

Throughout the history, the evolutions of the requirements for manufacturing equipments have depended on the changes in the customers' demands. Among the present trends in the requirements for new manufacturing equipments, there are more flexible and more reactive machines. In order to satisfy those requirements, this paper proposes a control and monitoring framework for machine tools based on smart sensor, on smart actuator and on agent concepts. The proposed control and monitoring framework achieves machine monitoring, process monitoring and adapting functions that are not usually provided by machine tool control systems. The proposed control and monitoring framework has been evaluated by the means of a simulated operative part of a machine tool. The communication between the agents is achieved thanks to an Ethernet network and CORBA protocol. The experiments (with and without cooperation between agents for accommodating) give encouraging results for implementing the proposed control framework to operational machines. Also, the cooperation between the agents of control and monitoring framework contributes to the improvement of reactivity by adapting cutting parameters to the machine and process states and to increase productivity

Distributed machining control and monitoring using smart sensors/actuators

The study of smart sensors and actuators led, during the past few years, to the development of facilities which improve traditional sensors and actuators in a necessary way to automate production systems. In an other context, many studies are carried out aiming at defining a decisional structure for production activity control and the increasing need of reactivity leads to the autonomization of decisional levels close to the operational system. We suggest in this paper to study the natural convergence between these two approaches and we propose an integration architecture dealing with machine tool and machining control that enables the exploitation of distributed smart sensors and actuators in the decisional system

Comparison of nonlinear dynamic inversion and inverse simulation

No abstract available

Investigation of the Heating Processes and Temperature Field of the Frequency-controlled Asynchronous Engine Based on Mathematical Models

The study of the temperature field of the engine for non-stationary modes is done. A numerical simulation of a non-stationary thermal process using dynamic EHD, the characteristic of the rate of rise of temperatures is done. An increase in the temperature of individual parts in the idle interval, when the power of heat release is significantly reduced, is established, and the reverse of the heat flow through the air gap is established. It is shown that the EHD method, in contrast to the FEM, is self-sufficient, which determines its practical value. In various parts of the speed control range in the implementation of various laws of regulation. At the same time, the main electrical, magnetic and additional losses associated with the fundamental voltage harmonics (FVH), and mechanical losses, as well as additional electrical and magnetic losses associated with the higher voltage harmonics, change. When using serial asynchronous engines as frequency-controlled. Permissible under the conditions of heating power is significantly reduced by the power of serial engines. Depending on the synchronous speed, the reduction is from 10 % to 20 %. Given the additional overheating due to higher voltage harmonics, as well as the deterioration of the cooling conditions when adjusting the rotational speed "down" from the nominal, it seems very relevant

Inverse Simulation as a Tool for Fault Detection and Isolation in Planetary Rovers

With manned expeditions to planetary bodies beyond our own and the Moon currently intractable, the onus falls upon robotic systems to explore and analyse extraterrestrial environments such as Mars. These systems typically take the form of wheeled rovers, designed to navigate the difficult terrain of other worlds. Rovers have been used in this role since Lunokhod 1 landed on the Moon in 1970. While early rovers were remote controlled, communication latency with bodies beyond the Moon and the desire to improve mission effectiveness have resulted in increasing autonomy in planetary rovers. With an increase in autonomy, however, comes an increase in complexity. This can have a negative impact on the reliability of the rover system. With a fault-free system an unlikely prospect and human assistance millions of miles away, the rover must have a robust fault detection, isolation and recovery (FDIR) system. The need for comprehensive FDIR is demonstrated by the recent Chinese lunar rover, Yutu (or “Jade Rabbit”). Yutu was rendered immobile 42 days after landing and remained so for the duration of its operational life: 31 months. While its lifespan far exceeded its expected value, Yutu's inability to move severely impaired its ability to perform its mission. This clearly highlights the need for robust FDIR. A common approach to FDIR is through the generation and analysis of residuals. Output residuals may be obtained by comparing the outputs of the system with predictions of those outputs, obtained from a mathematical model of the system which is supplied with the system inputs. Output residuals allow simple detection and isolation of faults at the output of the system. Faults in earlier stages of the system, however, propagate through the system dynamics and can disperse amongst several of the outputs. This problem is exemplified by faults at the input, which can potentially excite every system state and thus manifest in every output residual. Methods exist for decoupling and analysing output residuals such that input faults may be isolated, however, these methods are complex and require comprehensive development and testing. A conceptually simpler approach is presented in this paper. Inverse simulation (InvSim) is a numerical method by which the inputs of a system are obtained for a desired output. It does so by using a Newton-Raphson algorithm to solve a non-linear model of the system for the input. When supplied with the outputs of a fault-afflicted system, InvSim produces the input required to drive a fault-free system to this output. The fault therefore manifests itself in this generated input signal. The InvSim-generated input may then be compared to the true system input to generate input residuals. Just as a fault at an output manifests itself in the residual for that output alone, a fault at an input similarly manifests itself only in the residual for that input. InvSim may also be used to generate residuals at other locations in the system, by considering distinct subsystems with their own inputs and outputs. This ability is tested comprehensively in this paper. Faults are applied to a simulated rover at a variety of locations within the system structure and residuals generated using both InvSim and conventional forward simulation. Residuals generated using InvSim are shown to facilitate detection and isolation of faults in several locations using simple analyses. By contrast, forward simulation requires the use of complex analytical methods such as structured residuals or adaptive thresholds

Communication Subsystems for Emerging Wireless Technologies

The paper describes a multi-disciplinary design of modern communication systems. The design starts with the analysis of a system in order to define requirements on its individual components. The design exploits proper models of communication channels to adapt the systems to expected transmission conditions. Input filtering of signals both in the frequency domain and in the spatial domain is ensured by a properly designed antenna. Further signal processing (amplification and further filtering) is done by electronics circuits. Finally, signal processing techniques are applied to yield information about current properties of frequency spectrum and to distribute the transmission over free subcarrier channels