5,007 research outputs found
Minimum Expected Distortion in Gaussian Layered Broadcast Coding with Successive Refinement
A transmitter without channel state information (CSI) wishes to send a
delay-limited Gaussian source over a slowly fading channel. The source is coded
in superimposed layers, with each layer successively refining the description
in the previous one. The receiver decodes the layers that are supported by the
channel realization and reconstructs the source up to a distortion. In the
limit of a continuum of infinite layers, the optimal power distribution that
minimizes the expected distortion is given by the solution to a set of linear
differential equations in terms of the density of the fading distribution. In
the optimal power distribution, as SNR increases, the allocation over the
higher layers remains unchanged; rather the extra power is allocated towards
the lower layers. On the other hand, as the bandwidth ratio b (channel uses per
source symbol) tends to zero, the power distribution that minimizes expected
distortion converges to the power distribution that maximizes expected
capacity. While expected distortion can be improved by acquiring CSI at the
transmitter (CSIT) or by increasing diversity from the realization of
independent fading paths, at high SNR the performance benefit from diversity
exceeds that from CSIT, especially when b is large.Comment: To appear in the proceedings of the 2007 IEEE International Symposium
on Information Theory, Nice, France, June 24-29, 200
Distortion Minimization in Gaussian Layered Broadcast Coding with Successive Refinement
A transmitter without channel state information (CSI) wishes to send a
delay-limited Gaussian source over a slowly fading channel. The source is coded
in superimposed layers, with each layer successively refining the description
in the previous one. The receiver decodes the layers that are supported by the
channel realization and reconstructs the source up to a distortion. The
expected distortion is minimized by optimally allocating the transmit power
among the source layers. For two source layers, the allocation is optimal when
power is first assigned to the higher layer up to a power ceiling that depends
only on the channel fading distribution; all remaining power, if any, is
allocated to the lower layer. For convex distortion cost functions with convex
constraints, the minimization is formulated as a convex optimization problem.
In the limit of a continuum of infinite layers, the minimum expected distortion
is given by the solution to a set of linear differential equations in terms of
the density of the fading distribution. As the bandwidth ratio b (channel uses
per source symbol) tends to zero, the power distribution that minimizes
expected distortion converges to the one that maximizes expected capacity.
While expected distortion can be improved by acquiring CSI at the transmitter
(CSIT) or by increasing diversity from the realization of independent fading
paths, at high SNR the performance benefit from diversity exceeds that from
CSIT, especially when b is large.Comment: Accepted for publication in IEEE Transactions on Information Theor
Distortion Metrics of Composite Channels with Receiver Side Information
We consider transmission of stationary ergodic sources over non-ergodic composite channels with channel state information at the receiver (CSIR). Previously we introduced alternative capacity definitions to Shannon capacity, including outage and expected capacity. These generalized definitions relax the constraint of Shannon capacity that all transmitted information must be decoded at the receiver. In this work alternative end- to-end distortion metrics such as outage and expected distortion are introduced to relax the constraint that a single distortion level has to be maintained for all channel states. Through the example of transmission of a Gaussian source over a slow-fading Gaussian channel, we illustrate that the end-to-end distortion metrics dictate whether the source and channel coding can be separated for a communication system. We also show that the source and channel need to exchange information through an appropriate interface to facilitate separate encoding and decoding
Distortion Exponent in MIMO Fading Channels with Time-Varying Source Side Information
Transmission of a Gaussian source over a time-varying multiple-input
multiple-output (MIMO) channel is studied under strict delay constraints.
Availability of a correlated side information at the receiver is assumed, whose
quality, i.e., correlation with the source signal, also varies over time. A
block-fading model is considered for the states of the time-varying channel and
the time-varying side information; and perfect state information at the
receiver is assumed, while the transmitter knows only the statistics. The high
SNR performance, characterized by the \textit{distortion exponent}, is studied
for this joint source-channel coding problem. An upper bound is derived and
compared with lowers based on list decoding, hybrid digital-analog
transmission, as well as multi-layer schemes which transmit successive
refinements of the source, relying on progressive and superposed transmission
with list decoding. The optimal distortion exponent is characterized for the
single-input multiple-output (SIMO) and multiple-input single-output (MISO)
scenarios by showing that the distortion exponent achieved by multi-layer
superpositon encoding with joint decoding meets the proposed upper bound. In
the MIMO scenario, the optimal distortion exponent is characterized in the low
bandwidth ratio regime, and it is shown that the multi-layer superposition
encoding performs very close to the upper bound in the high bandwidth expansion
regime.Comment: Submitted to IEEE Transactions on Information Theor
Physical Layer Service Integration in 5G: Potentials and Challenges
High transmission rate and secure communication have been identified as the
key targets that need to be effectively addressed by fifth generation (5G)
wireless systems. In this context, the concept of physical-layer security
becomes attractive, as it can establish perfect security using only the
characteristics of wireless medium. Nonetheless, to further increase the
spectral efficiency, an emerging concept, termed physical-layer service
integration (PHY-SI), has been recognized as an effective means. Its basic idea
is to combine multiple coexisting services, i.e., multicast/broadcast service
and confidential service, into one integral service for one-time transmission
at the transmitter side. This article first provides a tutorial on typical
PHY-SI models. Furthermore, we propose some state-of-the-art solutions to
improve the overall performance of PHY-SI in certain important communication
scenarios. In particular, we highlight the extension of several concepts
borrowed from conventional single-service communications, such as artificial
noise (AN), eigenmode transmission etc., to the scenario of PHY-SI. These
techniques are shown to be effective in the design of reliable and robust
PHY-SI schemes. Finally, several potential research directions are identified
for future work.Comment: 12 pages, 7 figure
- …