155 research outputs found

    Radio resource management for V2V multihop communication considering adjacent channel interference

    Get PDF
    This paper investigates schemes for multihop scheduling and power control for vehicle-to-vehicle (V2V) multicast communication, taking into account the effects of both co-channel interference and adjacent channel interference, such that requirements on latency or age of information (AoI) are satisfied. Optimal performance can be achieved by formulating and solving mixed Boolean linear programming (MBLP) optimization problems for various performance metrics, including network throughput and connectivity. Fairness among network nodes (vehicles) is addressed by considering formulations that maximizes the worst-case network node performance. Solving the optimization problem comes at the cost of significant computational complexity for large networks and requires that (slow) channel state information is gathered at a central point. To address these issues, a clustering method is proposed to partition the optimization problem into a set of smaller problems, which reduces the overall computational complexity, and a decentralized algorithm that does not need channel state information is provided

    On Adjacent Channel Interference-Aware Radio Resource Management for Vehicle-to-Vehicle Communication

    Get PDF
    Safety applications play an essential role in supporting traffic safety and efficiency in next generation vehicular networks. Typical safety applications require vehicle-to-vehicle (V2V) communication with high reliability and low latency. The reliability of a communication link is mainly determined by the received interference, and broadly speaking, there are two types of interferences: co-channel interference (CCI) and adjacent channel interference (ACI). The CCI is cross-talk between transmitters scheduled in the same time-frequency slot, whereas ACI is interference due to leakage of transmit power outside the intended frequency slot. The ACI is typically not a problem in cellular communication since interference is dominated by CCI due to spectrum re-usage. However, ACI is a significant problem in near-far situations, i.e., when the channel gain from the interferer to receiver is high compared to the channel gain from the intended transmitter. The near-far situation is more common in V2V broadcast communication scenario due to high dynamic range of the channel gain and penetration loss by intermediate vehicles. This thesis investigates the impact of ACI on V2V communication and methods to mitigate it by proper radio resource management (RRM), i.e., scheduling and power control.In [Paper A], we first study ACI models for various transmission schemes and its impact on V2V communication. We propose a problem formulation for a) optimal scheduling as a Boolean linear programming (BLP) problem and b) optimal power control as a mixed Boolean linear programming (MBLP) problem. The objective of the problem formulation is to maximize the connectivity among VUEs in the network. Near-optimal schedules and power values are computed by solving first a) and then b) for smaller size instances of the problem. To handle larger-size instances of the problem, heuristic scheduling and power control algorithms with less computational complexity are proposed. We also propose a simple distributed block interleaver scheduler (BIS), which can be used as a baseline method.In [Paper B], we formulate the joint scheduling and power control problem as an MBLP to maximize the connectivity among VUEs. A column generation method is proposed to address the scalability of the network, i.e., to reduce the computational complexity of the joint problem. Moreover, the scheduling problem is observed to be numerically sensitive due to the high dynamic range of channel values and adjacent channel interference ratio (ACIR) values. Therefore, a novel method is proposed to reduce the sensitivity and compute a numerically stable optimal solution at the price of increased computational complexity.In [Paper C], we extend the RRM problem formulation to include various objectives, such as maximizing connectivity/throughput and minimizing age of information (AoI). In order to account for the fairness, we also formulate the problem to improve the worst-case throughput, connectivity, and AoI of a link in the network. All the problems are formulated as MBLP problems. In order to support a large V2V network, a clustering algorithm is proposed whose computational complexity scale well with the network size. Moreover, a multihop distributed scheduling scheme is proposed to handle zero channel state information (CSI) case

    Distributed Artificial Intelligence Solution for D2D Communication in 5G Networks

    Full text link
    Device to Device (D2D) Communication is one of the technology components of the evolving 5G architecture, as it promises improvements in energy efficiency, spectral efficiency, overall system capacity, and higher data rates. The above noted improvements in network performance spearheaded a vast amount of research in D2D, which have identified significant challenges that need to be addressed before realizing their full potential in emerging 5G Networks. Towards this end, this paper proposes the use of a distributed intelligent approach to control the generation of D2D networks. More precisely, the proposed approach uses Belief-Desire-Intention (BDI) intelligent agents with extended capabilities (BDIx) to manage each D2D node independently and autonomously, without the help of the Base Station. The paper includes detailed algorithmic description for the decision of transmission mode, which maximizes the data rate, minimizes the power consumptions, while taking into consideration the computational load. Simulations show the applicability of BDI agents in jointly solving D2D challenges.Comment: 10 pages,9 figure

    Cellular-V2X Communications for Platooning: Design and Evaluation

    Get PDF
    Abstract: Platooning is a cooperative driving application where autonomous/semi-autonomous vehicles move on the same lane in a train-like manner, keeping a small constant inter-vehicle distance, in order to reduce fuel consumption and gas emissions and to achieve safe and efficient transport. To this aim, they may exploit multiple on-board sensors (e.g., radars, lidars, positioning systems) and direct vehicle-to-vehicle communications to synchronize their manoeuvres. The main objective of this paper is to discuss the design choices and factors that determine the performance of a platooning application, when exploiting the emerging cellular vehicle-to-everything (C-V2X) communication technology and considering the scheduled mode, specified by 3GPP for communications over the sidelink assisted by the eNodeB. Since no resource management algorithm is currently mandated by 3GPP for this new challenging context, we focus on analyzing the feasibility and performance of the dynamic scheduling approach, with platoon members asking for radio resources on a per-packet basis. We consider two ways of implementing dynamic scheduling, currently unspecified by 3GPP: the sequential mode, that is somehow reminiscent of time division multiple access solutions based on IEEE 802.11p – till now the only investigated access technology for platooning – and the simultaneous mode with spatial frequency reuse enabled by the eNodeB. The evaluation conducted through system-level simulations provides helpful insights about the proposed configurations and C-V2X parameter settings that mainly affect the reliability and latency performance of data exchange in platoons, under different load settings. Achieved results show that the proposed simultaneous mode succeeds in reducing the latency in the update cycle in each vehicle’s controller, thus enabling future high-density platooning scenarios

    Scaling Laws for Vehicular Networks

    Get PDF
    Equipping automobiles with wireless communications and networking capabilities is becoming the frontier in the evolution to the next generation intelligent transportation systems (ITS). By means of vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications, information generated by the vehicle-borne computer, vehicle control system, on-board sensors, or roadside infrastructure, can be effectively disseminated among vehicles/infrastructure in proximity or to vehicles/infrastructure multiple hops away, known as vehicular networks (VANETs), to enhance the situational awareness of vehicles and provide motorist/passengers with an information-rich travel environment. Scaling law for throughput capacity and delay in wireless networks has been considered as one of the most fundamental issues, which characterizes the trend of throughput/delay behavior when the network size increases. The study of scaling laws can lead to a better understanding of intrinsic properties of wireless networks and theoretical guidance on network design and deployment. Moreover, the results could also be applied to predict network performance, especially for the large-scale vehicular networks. However, map-restricted mobility and spatio-temporal dynamics of vehicle density dramatically complicate scaling laws studies for VANETs. As an effort to lay a scientific foundation of vehicular networking, my thesis investigates capacity scaling laws for vehicular networks with and without infrastructure, respectively. Firstly, the thesis studies scaling law of throughput capacity and end-to-end delay for a social-proximity vehicular network, where each vehicle has a restricted mobility region around a specific social spot and services are delivered in a store-carry-and-forward paradigm. It has been shown that although the throughput and delay may degrade in a high vehicle density area, it is still possible to achieve almost constant scaling for per vehicle throughput and end-to-end delay. Secondly, in addition to pure ad hoc vehicular networks, the thesis derives the capacity scaling laws for networks with wireless infrastructure, where services are delivered uniformly from infrastructure to all vehicles in the network. The V2V communication is also required to relay the downlink traffic to the vehicles outside the coverage of infrastructure. Three kinds of infrastructures have been considered, i.e., cellular base stations, wireless mesh backbones (a network of mesh nodes, including one mesh gateway), and roadside access points. The downlink capacity scaling is derived for each kind of infrastructure. Considering that the deployment/operation costs of different infrastructure are highly variable, the capacity-cost tradeoffs of different deployments are examined. The results from the thesis demonstrate the feasibility of deploying non-cellular infrastructure for supporting high-bandwidth vehicular applications. Thirdly, the fundamental impact of traffic signals at road intersection on drive-thru Internet access is particularly studied. The thesis analyzes the time-average throughput capacity of a typical vehicle driving through randomly deployed roadside Wi-Fi networks. Interestingly, we show a significant throughput gain for vehicles stopping at intersections due to red signals. The results provide a quick and efficient way of determining the Wi-Fi deployment scale according to required quality of services. In summary, the analysis developed and the scaling laws derived in the thesis provide should be very useful for understanding the fundamental performance of vehicular networks

    Connected Vehicles: Solutions and Challenges

    Get PDF
    Abstract-Providing various wireless connectivities for vehicles enables the communication between vehicles and their internal and external environments. Such a connected vehicle solution is expected to be the next frontier for automotive revolution and the key to the evolution to next generation intelligent transportation systems (ITSs). Moreover, connected vehicles are also the building blocks of emerging Internet of Vehicles (IoV). Extensive research activities and numerous industrial initiatives have paved the way for the coming era of connected vehicles. In this paper, we focus on wireless technologies and potential challenges to provide vehicle-to-x connectivity. In particular, we discuss the challenges and review the state-of-the-art wireless solutions for vehicle-to-sensor, vehicleto-vehicle, vehicle-to-Internet, and vehicle-to-road infrastructure connectivities. We also identify future research issues for building connected vehicles
    • …
    corecore