Evaluating the more suitable ISM frequency band for iot-based smart grids: a quantitative study of 915 MHz vs. 2400 MHz

IoT has begun to be employed pervasively in industrial environments and critical infrastructures thanks to its positive impact on performance and efficiency. Among these environments, the Smart Grid (SG) excels as the perfect host for this technology, mainly due to its potential to become the motor of the rest of electrically-dependent infrastructures. To make this SG-oriented IoT cost-effective, most deployments employ unlicensed ISM bands, specifically the 2400 MHz one, due to its extended communication bandwidth in comparison with lower bands. This band has been extensively used for years by Wireless Sensor Networks (WSN) and Mobile Ad-hoc Networks (MANET), from which the IoT technologically inherits. However, this work questions and evaluates the suitability of such a "default" communication band in SG environments, compared with the 915 MHz ISM band. A comprehensive quantitative comparison of these bands has been accomplished in terms of: power consumption, average network delay, and packet reception rate. To allow such a study, a dual-band propagation model specifically designed for the SG has been derived, tested, and incorporated into the well-known TOSSIM simulator. Simulation results reveal that only in the absence of other 2400 MHz interfering devices (such as WiFi or Bluetooth) or in small networks, is the 2400 MHz band the best option. In any other case, SG-oriented IoT quantitatively perform better if operating in the 915 MHz band.This research was supported by the MINECO/FEDER project grants TEC2013-47016-C2-2-R (COINS) and TEC2016-76465-C2-1-R (AIM). The authors would like to thank Juan Salvador Perez Madrid nd Domingo Meca (part of the Iberdrola staff) for the support provided during the realization of this work. Ruben M. Sandoval also thanks the Spanish MICINN for an FPU (REF FPU14/03424) pre-doctoral fellowship

Dosimetric study of the radiolectric influence of humans into complex environments through determistic simulations and the implementation of a simplified model

The research presented in this thesis falls under the framework of dosimetry and deterministic estimations. A dosimetric study is carried out with the aid of a 3D Ray Launching simulation technique, by means of an in-house developed code at UPNA. Dosimetry is defined as the calculation of the absorbed dose when a tissue is exposed to electromagnetic radiation, in this case, non-ionizing radiation. It has reached a great importance since a part of the society starts to show concern about the exposure of people to artificial exposures caused by mobile phones or Wi-Fi networks. In fact, some entities (administrations and health bodies) are involved in the regulation and the release of guidelines about this subject. The objective of this thesis is to study dosimetry through 3D Ray Launching simulation technique, calibrating it by the implementation of several scenarios where the simulation tool is tested throughout the comparison of theoretical and measurement results. A simplified human body has been also developed with the aim of employing it in different scenarios, performing dosimetric estimations and providing insight on its influence in the electromagnetic power distribution inside an indoor scenario. Finally, obtained results are compared with different guideline thresholds giving an idea of the compliance of the law when usual wireless communication systems are emitting.Programa Oficial de Doctorado en Tecnologías de las Comunicaciones (RD 1393/2007)Komunikazioen Teknologietako Doktoretza Programa Ofiziala (ED 1393/2007

Contribution to the integration, performance improvement, and smart management of data and resources in the Internet of Things

[SPA] Esta tesis doctoral se presenta bajo la modalidad de compendio de publicaciones.[ENG] This doctoral dissertation has been presented in the form of thesis by publication. The IoT has seen a tremendous growth in the last few years. Not only due to its potential to transform societies, but also as an enabling technology for many other technological advances. Unfortunately, the IoT is a relatively recent paradigm that lacks the maturity of other well-established (not so recent) revolutions like the internet itself or Wireless Sensor Networks; upon which the IoT is built. The presented Thesis contributes to this maturation process by researching on the underlying communication mechanisms that enable a truly ubiquitous and effective IoT. As a Thesis by compilation, 5 relevant articles are introduced and discussed. Each of such articles delve into different key aspects that, in their own way, help closing the gap between what the IoT is expected to bring and what the IoT actually brings. As thoroughly commented throughout the main text, the comprehensive approach taken in this Thesis ensures that multiple angles of the same plane --the communication plane-- are analyzed and studied. From the mathematical analysis of how electromagnetic waves propagate through complex environments to the utilization of recent Machine Learning techniques, this Thesis explore a wide range of scientific and researching tools that are shown to improve the final performance of the IoT. In the first three chapters of this document, the reader will be introduced to the current context and state-of-the-art of the IoT while, at the same time, the formal objectives of this Thesis are outlined and set into such a global context. In the next five chapters, the five corresponding articles are presented and commented. For each and every of these articles: a brief abstract, a methodology summary, a highlight on the results and contributions and final conclusions are also added. Lastly, in the two last chapters, the final conclusions and future lines of this Thesis are commented.Los artículos que componen la tesis son los siguientes: 1. R. M. Sandoval, A.-J. J. Garcia-Sanchez, F. Garcia-Sanchez, and J. Garcia-Haro, \Evaluating the More Suitable ISM Frequency Band for IoT-Based Smart Grids: A Quantitative Study of 915 MHz vs. 2400 MHz," Sensors, vol. 17, no. 1, p. 76, Dec. 2016. 2. R. M. Sandoval, A.-J. J. Garcia-Sanchez, J.-M. M. Molina-Garcia-Pardo, F. Garcia-Sanchez, and J. Garcia-Haro, \Radio-Channel Characterization of Smart Grid Substations in the 2.4-GHz ISM Band," IEEE Trans. Wirel. Commun., vol. 16, no. 2, pp. 1294{1307, Feb. 2017. 3. R. M. Sandoval, A. J. Garcia-Sanchez, and J. Garcia-Haro, \Improving RSSI-based path-loss models accuracy for critical infrastructures: A smart grid substation case-study," IEEE Trans. Ind. Informatics, vol. 14, no. 5, pp. 2230{2240, 2018. 4. R. M. Sandoval, A.-J. Garcia-Sanchez, J. Garcia-Haro, and T. M. Chen, \Optimal policy derivation for Transmission Duty-Cycle constrained LPWAN," IEEE Internet Things J., vol. 5, no. 4, pp. 1{1, Aug. 2018. 5. R. M. Sandoval, S. Canovas-Carrasco, A. Garcia-Sanchez, and J. Garcia-Haro, \Smart Usage of Multiple RAT in IoT-oriented 5G Networks: A Reinforcement Learning Approach," in 2018 ITU Kaleidoscope: Machine Learning for a 5G Future (ITU K), 2018, pp. 1-8.Escuela Internacional de Doctorado de la Universidad Politécnica de CartagenaUniversidad Politécnica de CartagenaPrograma de Doctorado en Tecnologías de la Información y las Comunicaciones por la Universidad Politécnica de Cartagen