278 research outputs found
Efficient Resource Management Mechanism for 802.16 Wireless Networks Based on Weighted Fair Queuing
Wireless Networking continues on its path of being one of the most commonly used means of communication. The evolution of this technology has taken place through the design of various protocols. Some common wireless protocols are the WLAN, 802.16 or WiMAX, and the emerging 802.20, which specializes in high speed vehicular networks, taking the concept from 802.16 to higher levels of performance. As with any large network, congestion becomes an important issue. Congestion gains importance as more hosts join a wireless network. In most cases, congestion is caused by the lack of an efficient mechanism to deal with exponential increases in host devices. This can effectively lead to very huge bottlenecks in the network causing slow sluggish performance, which may eventually reduce the speed of the network. With continuous advancement being the trend in this technology, the proposal of an efficient scheme for wireless resource allocation is an important solution to the problem of congestion. The primary area of focus will be the emerging standard for wireless networks, the 802.16 or âWiMAXâ. This project, attempts to propose a mechanism for an effective resource management mechanism between subscriber stations and the corresponding base station
Performance Analysis for Bandwidth Allocation in IEEE 802.16 Broadband Wireless Networks using BMAP Queueing
This paper presents a performance analysis for the bandwidth allocation in
IEEE 802.16 broadband wireless access (BWA) networks considering the
packet-level quality-of-service (QoS) constraints. Adaptive Modulation and
Coding (AMC) rate based on IEEE 802.16 standard is used to adjust the
transmission rate adaptively in each frame time according to channel quality in
order to obtain multiuser diversity gain. To model the arrival process and the
traffic source we use the Batch Markov Arrival Process (BMAP), which enables
more realistic and more accurate traffic modelling. We determine analytically
different performance parameters, such as average queue length, packet dropping
probability, queue throughput and average packet delay. Finally, the analytical
results are validated numerically.Comment: 16 page
Connection admission control and packet scheduling for IEEE 802.16 networks
Includes bibliographical references.The IEEE 802.16 standard introduced as one of the Wireless Metropolitan Area Networks (WMAN) for Broadband Wireless Access (BWA) which is known as Worldwide Interoperability for Microwave Access (WiMAX), provides a solution of broadband connectivity to areas where wired infrastructure is economically and technically infeasible. Apart from the advantage of having high speeds and low costs, IEEE 802.16 has the capability to simultaneously support various service types with required QoS characteristics. ... While IEEE 802.16 standard defines medium access control (MAC) and physical (PHY) layers specification, admission control and packet scheduling mechanisms which are important elements of QoS provisioning are left to vendors to design and implement for service differentiation and QoS support
Recommended from our members
Investigation of efficient resource allocation schemes for WiMAX networks
This thesis was submitted for the degree of Master of Philosophy and was awarded by Brunel University on 9 July 2008.WiMax (Worldwide Interoperability for Microwave Access) is a promising wireless technology with the aim of providing the last mile wireless broadband access designed for both fixed and mobile consumers as an alternative solution to the wired DSL and cable access schemes. The purpose of this research project is to investigate efficient resource allocation algorithms for WiMax. To achieve this goal, we investigate efficient PHY layer Partial Usage of SubCarriers (PUSC) allocation as well as MAC layer piggyback bandwidth request mechanisms. At the PHY layer we proposed improvements on the Uplink and Downlink PUSC subcarrier allocation scheme. For the Uplink PUSC we suggested a method by allocating different frequencies to neighbouring cells in combination with the Integer Frequency Reuse (IFR) and Fractional Frequency Reuse (FFR) in order to reduce interferences and collisions. The simulation results exhibit that collision rates can be reduced to zero for both IFR and FFR patterns with the proposed improvement by assuming that perfect power control is used in the system. In addition, there is no collision at cell edges. The results also show that FFR patterns achieve lower inter-cell interference and higher capacities as compared to the IFR patterns. For the Downlink PUSC we introduced an offset scheme with the purpose of increasing the number of users in the system. At the MAC layer we propose an improvement on the piggyback bandwidth request mechanism by increasing the size of the piggyback bandwidth request in order to reduce the number of bandwidth requests and hence improve the resource utilisation. The simulation results demonstrate that our improved scheme achieves higher throughput, less delay and packet loss rates as compared to the standardised piggyback bandwidth request mechanism
Recommended from our members
Design of interface selection protocols for multi-homed wireless networks
This thesis was submitted for the degree of Doctor of Philosophy and was awarded by Brunel University on 10 December 2010.The IEEE 802.11/802.16 standards conformant wireless communication stations have multi-homing transmission capability. To achieve greater communication efficiency, multi-homing capable stations use handover mechanism to select appropriate transmission channel according to variations in the channel quality. This thesis presents three internal-linked handover schemes, (1) Interface Selection Protocol (ISP), belonging to Wireless Local Area Network (WLAN)- Worldwide Interoperability for Microwave Access (WiMAX) environment (2) Fast Channel Scanning (FCS) and (3) Traffic Manager (TM), (2) and (3) belonging to WiMAX Environment. The proposed schemes in this thesis use a novel mechanism of providing a reliable communication route. This solution is based on a cross-layer communication framework, where the interface selection module uses various network related parameters from Medium Access Control (MAC) sub-layer/Physical Layer (PHY) across the protocol suite for decision making at the Network layer. The proposed solutions are highly responsive when compared with existing multi-homed schemes; responsiveness is one of the key factors in the design of such protocols. Selected route under these schemes is based on the most up to date link-layer information. Therefore, such a route is not only reliable in terms of route optimization but it also fulfils the application demands in terms of throughput and delay. Design of ISP protocol use probing frames during the route discovery process. The 802.11 mandates the use of different rates for data transmission frames. The ISP-metric can be incorporated into various routing aspects and its applicability is determined by the possibility of provision of MAC dependent parameters that are used to determine the best path metric values. In many cases, higher device density, interference and mobility cause variable medium access delays. It causes creation of âunreachable zonesâ, where destination is marked as unreachable. However, by use of the best path metric, the destination has been made reachable, anytime and anywhere, because of the intelligent use of the probing frames and interface selection algorithm implemented. The IEEE 802.16e introduces several MAC level queues for different access categories, maintaining service requirement within these queues; which imply that frames from a higher priority queue, i.e. video frames, are serviced more frequently than those belonging to lower priority queues. Such an enhancement at the MAC sub-layer introduces uneven queuing delays. Conventional routing protocols are unaware of such MAC specific constraints and as a result, these factors are not considered which result in channel performance degradation. To meet such challenges, the thesis presents FCS and TM schemes for WiMAX. For FCS, Its solution is to improve the mobile WiMAX handover and address the scanning latency. Since minimum scanning time is the most important issue in the handover process. This handover scheme aims to utilize the channel efficiently and apply such a procedure to reduce the time it takes to scan the neighboring access stations. TM uses MAC and physical layer (PHY) specific information in the interface metric and maintains a separate path to destination by applying an alternative interface operation. Simulation tests and comparisons with existing multi-homed protocols and handover schemes demonstrate the effectiveness of incorporating the medium dependent parameters. Moreover, show that suggested schemes, have shown better performance in terms of end-to-end delay and throughput, with efficiency up to 40% in specific test scenarios
A Scalable QoS Scheduling Architecture For WiMAX Multi-Hop Relay Networks.
WiMAX Mobile Multi-hop Relay (MMR) network has been introduced to increase the capacity and extend the
coverage area of a single WiMAX Base Station (BS) by the use of a Relay Station (RS)
- âŠ