Graphdiyne as a Promising Substrate for Stabilizing Pt Nanoparticle Catalyst

At present, Pt nanoparticle catalysts in fuel cells suffer from aggregation and loss of chemical activity. In this work, graphdiyne, which has natural porous structure, was proposed as substrate with high adsorption ability to stabilize Pt nanoparticles. Using multiscale calculations by ab initio method and the ReaxFF potential, geometry optimizations, molecular dynamics simulations, Metropolis Monte Carlo simulations and minimum energy paths calculations were performed to investigate the adsorption energy and the rates of desorption and migration of Pt nanoparticles on graphdiyne and graphene. According to the comparison between graphdiyne and graphene, it was found that the high adsorption ability of graphdiyne can avoid Pt nanoparticle migration and aggregation on substrate. Then, simulations indicated the potential catalytic ability of graphdiyne-Pt-nanoparticle system to the oxygen reduction reaction in fuel cells. In summary, graphdiyne should be an excellent material to replace graphite or amorphous carbon matrix for stabilizing Pt nanoparticle catalysts

Platinized tin oxide catalysts for CO2 lasers: Effects of pretreatment

Platinized tin oxide surfaces used for low-temperature CO oxidation in CO2 lasers have been characterized before and after reduction in CO at 125 and 250 C using ion scattering spectroscopy (ISS) and X ray photoelectron spectroscopy (XPS). XPS indicates that the Pt is present initially as PtO2. Reduction at 125 C converts the PtO2 to Pt(OH)2 while reduction at 250 C converts the PtO2 to metallic Pt. ISS shows that the Pt in the outermost atomic layer of the catalyst is mostly covered by substrate species during the 250 C reduction. Both the ISS and XPS results are consistent with Pt/Sn alloy formation. The surface dehydration and migration of substrate species over surface Pt and Sn appear to explain why a CO pretreatment at 250 C produces inferior CO oxidation activities compared to a 125 C pretreatment

Monte Carlo simulation of metal deposition on foreign substrates

The deposition of a metal on a foreign substrate is studied by means of grand canonical Monte Carlo simulations and a lattice-gas model with pair potential interactions between nearest neighbors. The influence of temperature and surface defects on adsorption isotherms and differential heat of adsorption is considered. The general trends can be explained in terms of the relative interactions between adsorbate atoms and substrate atoms. The systems Ag/Au(100), Ag/Pt(100), Au/Ag(100) and Pt/Ag(100) are analyzed as examples.Comment: 26 pages, 9 figure

Composite nanostructured solid-acid fuel-cell electrodes via electrospray deposition

Stable, porous, nanostructured composite electrodes were successfully fabricated via the inexpensive and scalable method of electrospray deposition, in which a dissolved solute is deposited onto a substrate using an electric field to drive droplet migration. The desirable characteristics of high porosity and high surface area were obtained under conditions that favored complete solvent evaporation from the electrospray droplets prior to contact with the substrate. Solid acid (CsH_2PO_4) feature sizes of 100 nm were obtained from electrosprayed water–methanol solutions with 10 g L^(−1) CsH_2PO_4 and 5 g L^(−1) Pt catalyst particles suspended using polyvinylpyrrolidone (PVP). Alternative additives such as Pt on carbon and carbon-nanotubes (CNTs) were also successfully incorporated by this route, and in all cases the PVP could be removed from the electrode by oxygen plasma treatment without damage to the structure. In the absence of additives (Pt, Pt/C and CNTs), the feature sizes were larger, 300 nm, and the structure morphologically unstable, with significant coarsening evident after exposure to ambient conditions for just two days. Electrochemical impedance spectroscopy under humidified hydrogen at 240 °C indicated an interfacial impedance of ~1.5 Ω cm^2 for the Pt/CsH_2PO_4 composite electrodes with a total Pt loading of 0.3 ± 0.2 mg cm^(−2). This result corresponds to a 30-fold decrease in Pt loading relative to mechanically milled electrodes with comparable activity, but further increases in activity and Pt utilization are required if solid acid fuel cells are to attain widespread commercial adoption

Layer-resolved optical conductivity of Co|Pt multilayers

The complex optical conductivity tensor is calculated for the Co|Pt systems by applying a contour integration technique within the framework of the spin-polarized relativistic screened Korringa-Kohn-Rostoker method. It is shown that the optical conductivity of the Co|Pt multilayer systems is dominated by contributions arising from the Pt cap and/or substrate layers.Comment: 7 pages (LaTeX), 2 (a,b) figures (Encapsulated PostScript), J. Magn. Magn. Materials, in pres