Design, fabrication and test of integrated micro-scale vibration based electromagnetic generator

This paper discusses the design, fabrication and testing of electromagnetic microgenerators. Three different designs of power generators are partially microfabricated and assembled. Prototype A having a wire-wound copper coil, Prototype B, an electrodeposited copper coil both on a Deep Reactive Ion etched (DRIE) silicon, beam and paddle. Prototype C uses moving NdFeB magnets in between two microfabricated coils. The integrated coil, paddle and beam were fabricated using standard micro-Electro-Mechanical Systems (MEMS) processing techniques. For Prototype A, the maximum measured power output was 148 nW at 8.08 kHz resonant frequency and 3.9 m/s2 acceleration. For prototype B, the microgenerator gave a maximum load power of 23 nW for an acceleration of 9.8 m/s2, at a resonant frequency of 9.83 kHz. This is a substantial improvement in power generated over other microfabricated silicon based generators reported in literature. This generator has a volume of 0.1 cm3 which is lowest of all the silicon based microfabricated electromagnetic power generators reported. To verify the potential of integrated coils in electromagnetic generators, Prototype C was assembled. This generated a maximum load power of 5

Parylene-based electret power generators

n electret power generator is developed using a new electret made of a charged parylene HT® thin-film polymer. Here, parylene HT® is a room-temperature chemical-vapor-deposited thin-film polymer that is MEMS and CMOS compatible. With corona charge implantation, the surface charge density of parylene HT® is measured as high as 3.69 mC m^−2. Moreover, it is found that, with annealing at 400 °C for 1 h before charge implantation, both the long-term stability and the high-temperature reliability of the electret are improved. For the generator, a new design of the stator/rotor is also developed. The new micro electret generator does not require any sophisticated gap-controlling structure such as tethers. With the conformal coating capability of parylene HT®, it is also feasible to have the electret on the rotors, which is made of either a piece of metal or an insulator. The maximum power output, 17.98 µW, is obtained at 50 Hz with an external load of 80 MΩ. For low frequencies, the generator can harvest 7.7 µW at 10 Hz and 8.23 µW at 20 Hz

Combined hydro-wind generation bids in a pool-based electricity market

Present regulatory trends are promoting the irect participation of wind energy in electricity markets. The final result of these markets sets the production scheduling for the operation time, including a power commitment from the wind generators. However, wind resources are uncertain, and the final power delivered usually differs from the initial power committed. This imbalance produces an overcost in the system, which must be paid by those who produce it, e.g., wind generators among others. As a result, wind farm revenue decreases, but it could increase by allowing wind farms to submit their bids to the markets together with a hydro generating unit, which may easily modify its production according to the expected imbalance. This paper presents a stochastic optimization technique that maximizes the joint profit of hydro and wind generators in a pool-based electricity market, taking into account the uncertainty of wind power prediction.En prens

Mediating Market Power in Electricity Networks

We ask under what conditions transmission contracts increase or mitigate market power. We show that the allocation process of transmission rights is crucial. In an efficiently arbitraged uniform price auction generators will only obtain contracts that mitigate their market power. However, if generators inherit transmission contracts or buy them in a 'pay-as-bid' auction, then these contracts can enhance market power. In the two-node network case banning generators from holding transmission contracts that do not correspond to delivery of their own energy mitigates market power. Meshed networks differ in important ways as constrained links no longer isolate prices in competitive markets from market manipulation. The paper suggests ways of minimizing market power considerations when designing transmission contracts.

Design of all electric secondary power system for future advanced MALE UAV

SAvE (Systems for UAV Alternative Energy) is a research project funded in 2007 by Piemonte Regional Government, Italy, and assigned to Politecnico di Torino and Alenia Aeronautica. Aim of the project is the study of new, more efficient, more effective and more environmentally friendly on board systems for future advanced Unmanned Aerial Vehicles (UAV), particularly for future advanced MALE UAVs. The paper deals with the analysis and design of the all electric Secondary Power System of a future advanced MALE UAV, that we consider as "reference aircraft". After a thorough trade-off analysis of different configurations of the Secondary Power System, the hybrid configuration, characterized by generators (or better, starter/generators), fuel cells and traditional and innovative batteries, has been selected as the most promising. Detailed investigations to find the best way to apportion the supply of secondary power, considering the various power sources (generators or starter/generators, batteries and fuel cells) in the different modes of operations, have been performed thanks to an integrated simulation environment, where physical, functional and mission scenario simulations continuously exchange data and results

Improved Heat Demand Prediction of Individual Households

One of the options to increase the energy efficiency of current electricity network is the use of a Virtual Power Plant. By using multiple small (micro)generators distributed over the country, electricity can be produced more efficiently since these small generators are more efficient and located where the energy is needed. In this paper we focus on micro Combined Heat and Power generators. For such generators, the production capacity is determined and limited by the heat demand. To keep the global electricity network stable, information about the production capacity of the heat-driven generators is required in advance. In this paper we present methods to perform heat demand prediction of individual households based on neural network techniques. Using different input sets and a so called sliding window, the quality of the predictions can be improved significantly. Simulations show that these improvements have a positive impact on controlling the distributed microgenerators

Modelling of firm offer from combined wind and hydro generations

This paper analyses the impact of a firm combined offer by wind and small hydro generators located in the river chain, with a view to address the intermittency of wind generators. Both generations are dispatchable and cleared against their offer prices. They offer a firm, hourly-schedule (WH schedule) for 24 hours ahead of real-time operation to an auction based locational marginal price (LMP) market with other generators offering to meet the system loads. The model network consists of other generators and loads at different buses. The scheduled power is taken off at a predetermined bus, as a load at the bus. This schedule must be met by the wind and hydro combined generations. If necessary, a notional thermal generation is available at a considerable higher price to meet the schedule, at the offtake point. The objective is to minimise the total supply cost for 24 hours and examine LMPs and constraint-on costs while respecting the given WH schedule, nodal power balance constraint, generation limits, branch flow and other limits. Discussion is based on New Zealand (NZ) Electricity Market rules, where generators are self-committed into the market. Three scenarios are studied and the results presented