Hydroxyapatite promotes superior adhesion and proliferation of telomerase transformed keratocytes in comparison with inert plastic skirt materials used in leading contemporary keratoprostheses

Aim: Published clinical series suggest the osteoodontokeratoprosthesis (OOKP) may have a lower extrusion rate than current synthetic keratoprostheses. The OOKP is anchored in the eye wall by autologous tooth. The authors’ aim was to compare adhesion, proliferation, and morphology for telomerase transformed keratocytes seeded on calcium hydroxyapatite (the principal mineral constituent of tooth) and materials used in the anchoring elements of commercially available synthetic keratoprostheses. Methods: Test materials were hydroxyapatite, polytetrafluoroethylene (PTFE), polyhydroxyethyl methacrylate (HEMA), and glass (control). Cell adhesion and viability were quantified at 4 hours, 24 hours, and 1 week using a calcein-AM/EthD-1 viability/cytotoxicity assay. Focal contact expression and cytoskeletal organisation were studied at 24 hours by confocal microscopy with immunoflourescent labelling. Further studies of cell morphology were performed using light and scanning electron microscopy. Results: Live cell counts were significantly greater on hydroxyapatite surfaces at each time point (p<0.04). Dead cell counts were significantly higher for PTFE at 7 days (p<0.002). Β1 integrin expression was highest on hydroxyapatite. Adhesion structures were well expressed in flat, spread out keratocytes on both HA and glass. Keratocytes tended to be thinner and spindle shaped on PTFE. The relatively few keratocytes visible on HEMA test surfaces were rounded and poorly adherent. Conclusions: Keratocyte adhesion, spreading, and viability on hydroxyapatite test surfaces is superior to that seen on PTFE and HEMA. Improving the initial cell adhesion environment in the skirt element of keratoprostheses may enhance tissue integration and reduce device failure rates

Nitrate And Bicarbonate Selective Chemfets

The development of durable anion selective CHEMFET micro sensors is described. Selectivity in these sensors is either obtained from differences in hydration energy of the anions (the Hlofmeister series, giving nitrate selectivity) or by introduction of a new class of uranyl salophene ionophores (bicarbonate selectivity). The durability of the nitrate sensor was enhanced by using polysiloxane membranes in which 1 cationic tetraalkylammonium sites were covalently bound to the membrane matrix

Synthesis and Characterization of a Smart Super Absorbent Hydrogel

This research work aims to give an overview of the synthesis of a smart super absorbent semi interpenetrating hydrogel and their characterizations. The main objective is to mix polyacrylamide with Tamarind gum and to check how the parameters are varying to create a good strength sustained delivery system. We tried to optimize the process parameters of polyacrylamide and tamarind gum semi interpenetrating hydrogel. Swelling measurements were done and mechanical properties were investigated. Cyclic compression, creep & stress relaxation properties are observed. XRD and FTIR studies were analyzed, Biocompatibility is checked and cross linking density is calculated. Tamarind gum converted the polyacrylamide into a super absorbent. With the increasing concentration of tamarind gum, cross-link density increases. Addition of Tamarind gum increased the swelling capability of polyacrylamide gel and increased its pH sensitivity. From the mechanical test data, we can conclude that with increasing concentration of tamarind gum viscoelastic property is increased. From the XRD pattern, it is seen that the composite is highly amorphous. From the FTIR analysis, we can say that all the components used for making the composite are present. With the increasing concentration of tamarind gum, biocompatibility of the hydrogel increase

Biomaterials Used in Injectable Implants (Liquid Embolics) for Percutaneous Filling of Vascular Spaces

The biomaterials currently used in injectable implants (liquid embolics) for minimally invasive image-guided treatment of vascular lesions undergo, once injected in situ, a phase transition based on a variety of physicochemical principles. The mechanisms leading to the formation of a solid implant include polymerization, precipitation and cross-linking through ionic or thermal process. The biomaterial characteristics have to meet the requirements of a variety of treatment conditions. The viscosity of the liquid is adapted to the access instrument, which can range from 0.2 mm to 3 mm in diameter and from a few centimeters up to 200 cm in length. Once such liquid embolics reach the vascular space, they are designed to become occlusive by inducing thrombosis or directly blocking the lesion when hardening of the embolics occurs. The safe delivery of such implants critically depends on their visibility and their hardening mechanism. Once delivered, the safety and effectiveness issues are related to implant functions such as biocompatibility, biodegradability or biomechanical properties. We review here the available and the experimental products with respect to the nature of the polymer, the mechanism of gel cast formation and the key characteristics that govern the choice of effective injectable implant

Sorption of DNA by diatomite-Zn (II) embedded supermacroporous monolithic p(HEMA) cryogels

In this study, the DNA sorption performance of diatomite-Zn(II) embedded supermacroporous monolithic p(HEMA) cryogels were investigated for the purpose of designing a novel adsorbent that can be utilized for DNA purification, separation and immunoadsorption studies such as removal of anti-dsDNA antibodies from systemic lupus erythematosus (SLE) patient plasma. Poly(2-hydroxyethyl methacrylate) [p(HEMA)]-based monolithic cryogel column embedded with Zn2+-diatomite particles was prepared by free radical cryocopolymerization of 2-hydroxyethyl methacrylate (HEMA) with N,N’-methylene-bis-acrylamide (MBAAm). The polymerization reaction was initiated by N,N,N’,N’-tetramethylene diamine (TEMED) and ammonium persulfate (APS) pair in an ice bath. After thawing, the monolithic composite cryogels were used for affinity sorption and then subsequent desorption of DNA molecules from aqueous solutions. Diatomite (DA) particles were characterized by XRF and BET method. The characterization of composite cryogel was done through SEM imaging. The effects of pH of the solution, initial DNA concentration, ionic strength, temperature and flow rates on adsorption were investigated to determine the optimum conditions for adsorption/desorption experiments. The particle embedding procedure was shown to yield significantly enhanced adsorption of DNA on the adsorbent. Furthermore, considering its excellent bio-compatibility, p(HEMA) cryogels are promising a candidate for further DNA sorption studies

The preparation of HEMA-MPC films for ocular drug delivery

There is a need to prolong drug residence time using a biocompatible formulation in the subconjunctival space after surgery to treat glaucoma. Drug releasing discs were prepared with 2-(hydroxyethyl)methacrylate (HEMA) and 2-methacryloyl-oxyethyl phosphorylcholine (MPC). The ratio of bound water (Wb) to free water (Wf) ratio increased from 1:0.3 to 1:6.8 with increasing MPC (0 to 50%, w/w). The optimal balance between water content, SR and mechanical strength were obtained with 10% MPC (w/w) hydrogels. Water-alcohol mixtures were examined to facilitate loading of poorly soluble drugs, and they showed greater hydrogel swelling than either water or alcohol alone. The SR was 1.2 ± 0.02 and 3.3 ± 0.1 for water and water:ethanol (1:1) respectively. HEMA-MPC (10%) discs were loaded with dexamethasone using either water:ethanol (1:1) or methanol alone. Drug release was examined in an outflow rig model that mimics the subconjunctival space in the eye. Dexamethasone loading increased from 0.3 to 1.9 mg/disc when the solvent was changed from water:ethanol (1:1) to methanol with the dexamethasone half-life (t½) increasing from 1.9 to 9.7 days respectively. These encouraging results indicate that HEMA-MPC hydrogels have the potential to sustain the residence time of a drug in the subconjunctival space of the eye

Advances in the healing of flexor tendon injuries

The intrasynovial flexor tendons of the hand are critical for normal hand function. Injury to these tendons can result in absent finger flexion, and a subsequent loss of overall hand function. The surgical techniques used to repair these tendons have improved in the past few decades, as have the postoperative rehabilitation protocols. In spite of these advances, intrasynovial flexor tendon repairs continue to be plagued by postoperative scar formation, which limits tendon gliding and prevents a full functional recovery. This paper describes the current challenges of flexor tendon repair, and evaluates the most recent advances and strategies for achieving an excellent functional outcome.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/106844/1/wrr12161.pd

In vivo performance of chitosan/soy-based membranes as wound dressing devices for acute skin wounds

Wound management represents a major clinical challenge on what concerns healing enhancement and pain control. The selection of an appropriate dressing plays an important role in both recovery and esthetic ap- pearance of the regenerated tissue. Despite the wide range of available dressings, the progress in the wound care market relies on the increasing interest in using natural-based biomedical products. Herein, a rat wound- dressing model of partial-thickness skin wounds was used to study newly developed chitosan/soy (cht/soy)- based membranes as wound-dressing materials. Healing and repair of nondressed, cht/soy membrane-dressed, and Epigard -dressed wounds were followed macroscopically and histologically for 1 and 2 weeks. cht/soy membranes performed better than the controls, promoting a faster wound repair. Re-epithelialization, ob- served 1 week after wounding, was followed by cornification of the outermost epidermal layer at the second week of dressing, indicating repair of the wounded tissue. The use of this rodent model, although in impaired healing conditions, may enclose some drawbacks regarding the inevitable wound contraction. Moreover, being the main purpose the evaluation of cht/soy-based membranes’ performance in the absence of growth factors, the choice of a clinically relevant positive control was limited to a polymeric mesh, without any growth factor influencing skin healing/repair, Epigard. These new cht/soy membranes possess the desired features regarding healing/repair stimulation, ease of handling, and final esthetic appearance-thus, valuable prop- erties for wound dressings.The author Tircia C. Santos acknowledges the Portuguese Foundation for Science and Technology (FCT) for her PhD grant (SFRH/BD/40861/2007). This work was developed under the scope of the European Network of Excellence EXPERTISSUES (NMP3-CT-2004-5000283)

Polymeric Functionalized Stationary Phase for Separation of Ionic Compounds by IC

Synthesis and properties are described of multilayered stationary phases containing quaternary amine functional groups used for the analysis of inorganic anions by ion chromatography. The bonded phases were characterized by elemental analysis, solid state 13C NMR spectroscopy and chromatographic methods. The surface of polyhydroxyethyl methacrylate (solid support) was coated with polymeric layers formed by condensation polymerization of primary amine with diepoxide. Each layer of the anion exchange stationary phase consisted of methylamine and 1,4-butanedioldiglycidyl ether copolymer. A series of stationary phases with different number of polymerized layers were tested. Separation of inorganic anions, such as F−, Cl−, NO2−, Br−, NO3−, were performed. Aqueous hydroxide, carbonate and bicarbonate solutions were used as mobile phases