Laser-Accelerated proton beams as diagnostics for cultural heritage

This paper introduces the first use of laser-generated proton beams as diagnostic for materials of interest in the domain of Cultural Heritage. Using laser-accelerated protons, as generated by interaction of a high-power short-pulse laser with a solid target, we can produce proton-induced X-ray emission spectroscopies (PIXE). By correctly tuning the proton flux on the sample, we are able to perform the PIXE in a single shot without provoking more damage to the sample than conventional methodologies. We verify this by experimentally irradiating materials of interest in the Cultural Heritage with laser-accelerated protons and measuring the PIXE emission. The morphological and chemical analysis of the sample before and after irradiation are compared in order to assess the damage provoked to the artifact. Montecarlo simulations confirm that the temperature in the sample stays safely below the melting point. Compared to conventional diagnostic methodologies, laser-driven PIXE has the advantage of being potentially quicker and more efficien

Accurate high-resolution depth profiling of magnetron sputtered transition metal alloy films containing light species: A multi-method approach

We present an assessment of a multi-method approach based on ion beam analysis to obtain high-resolution depth profiles of the total chemical composition of complex alloy systems. As a model system we employ an alloy based on several transition metals and containing light species. Samples have been investigated by a number of different ion-beam based techniques, i.e., Rutherford Backscattering Spectrometry, Particle-Induced X-ray Emission, Elastic Backscattering Spectrometry and Time-of-Flight/Energy Elastic Recoil Detection Analysis. Sets of spectra obtained from these different techniques were analyzed both independently and following an iterative and self-consistent approach yielding a more accurate depth profile of the sample, including both metallic heavy constituents (Cr, Fe and Ni) as well as the rather reactive light species (C, O) in the alloy. A quantitative comparison in terms of achievable precision and accuracy is made and the limitations of the single method approach are discussed for the different techniques. The multi-method approach is shown to yield significantly improved and accurate information on stoichiometry, depth distribution, and thickness of the alloy with the improvements being decisive for a detailed correlation of composition to the material properties such as corrosion strength. The study also shows the increased relative importance of experimental statistics for the achievable accuracy in the multi-method approach.Comment: 18 pages, 6 figures and 1 tabl

Nuclear Physics for Cultural Heritage

Nuclear physics applications in medicine and energy are well known and widely reported. Less well known are the many important nuclear and related techniques used for the study, characterization, assessment and preservation of cultural heritage. There has been enormous progress in this field in recent years and the current review aims to provide the public with a popular and accessible account of this work. The Nuclear Physics Division of the EPS represents scientists from all branches of nuclear physics across Europe. One of its aims is the dissemination of knowledge about nuclear physics and its applications. This review is led by Division board member Anna Macková, Head of the Tandetron Laboratory at the Nuclear Physics Institute of the Czech Academy of Sciences, and the review committee includes four other members of the nuclear physics board interested in this area: Faiçal Azaiez, Johan Nyberg, Eli Piasetzky and Douglas MacGregor. To create a truly authoritative account, the Scientific Editors have invited contributions from leading experts across Europe, and this publication is the combined result of their work. The review is extensively illustrated with important discoveries and examples from archaeology, pre-history, history, geography, culture, religion and curation, which underline the breadth and importance of this field. The large number of groups and laboratories working in the study and preservation of cultural heritage across Europe indicate the enormous effort and importance attached by society to this activity

PIXE and ToF-SIMS analysis of streaker samplers filters

This paper presents methodological innovations introduced in the characterisation of urban aerosol collected in Italy in a recent campaign. Two complementary ion beam analysis (IBA) techniques were used to analyse Nuclepore filters used in continuous streaker samplers to collect airborne particles in four Italian towns. Na to Pb elemental concentrations were obtained by particle induced X-ray emission (PIXE), while time of flight secondary ion mass spectrometry (ToF-SIMS) produced, on the same samples, time trends for several elements and molecular fragments. In addition, light attenuation measurements were used as a tracer for black carbon. The data produced by these three techniques was merged into a unique data set to address the characterisation of particulate matter sources. Correlations between elemental concentration trends (PIXE) and relative trends for molecular fragments (ToF-SIMS) and black carbon (light attenuation) have been studied by cluster and principal component analysis

LibCPIXE: a PIXE simulation open-source library for multilayered samples

Most particle induced X-ray emission (PIXE) data analysis codes are not focused on handling multilayered samples. We have developed an open-source library called "LibCPIXE", for PIXE data analysis. It is written in standard C and implements functions for simulating X-ray yields of PIXE spectra taken from arbitrary samples, including multilayered targets. The library is designed to be fast, portable, modular and scalable, as well as to facilitate its incorporation into any existing program. In order to demonstrate the capabilities of the library, a program called CPIXE was developed and used to analyze various real samples involving both bulk and layered samples. Just as the library, the CPIXE source code is freely available under the General Public License. We demonstrate that it runs both under GNU/Linux systems as well as under MS Windows. There is in principle no limitation to port it to other platforms

On the importance of background subtraction in the analysis of coronal loops observed with TRACE

In the framework of TRACE coronal observations, we compare the analysis and diagnostics of a loop after subtracting the background with two different and independent methods. The dataset includes sequences of images in the 171 A, 195 A filter bands of TRACE. One background subtraction method consists in taking as background values those obtained from interpolation between concentric strips around the analyzed loop. The other method is a pixel-to-pixel subtraction of the final image when the loop had completely faded out, already used by Reale & Ciaravella 2006. We compare the emission distributions along the loop obtained with the two methods and find that they are considerably different. We find differences as well in the related derive filter ratio and temperature profiles. In particular, the pixel-to-pixel subtraction leads to coherent diagnostics of a cooling loop. With the other subtraction the diagnostics are much less clear. The background subtraction is a delicate issue in the analysis of a loop. The pixel-to-pixel subtraction appears to be more reliable, but its application is not always possible. Subtraction from interpolation between surrounding regions can produce higher systematic errors, because of intersecting structures and of the large amount of subtracted emission in TRACE observations.Comment: 9 pages, 9 figure

Design and optimization of a laser-PIXE beamline for material science applications

Multi-MeV proton beams can be generated by irradiating thin solid foils with ultra-intense (>10^18 W/cm^2) short laser pulses. Several of their characteristics, such as high bunch charge and short pulse duration, make them a complementary alternative to conventional radio frequency-based accelerators. A potential material science application is the chemical analysis of cultural heritage (CH) artifacts. The complete chemistry of the bulk material (ceramics, metals) can be retrieved through sophisticated nuclear techniques such as particle-induced X-ray emission (PIXE). Recently, the use of laser-generated proton beams was introduced as diagnostics in material science (laser-PIXE or laser-driven PIXE): Coupling laser-generated proton sources to conventional beam steering devices successfully enhances the capture and transport of the laser-accelerated beam. This leads to a reduction of the high divergence and broad energy spread at the source. The design of our hybrid beamline is composed of an energy selector, followed by permanent quadrupole magnets aiming for better control and manipulation of the final proton beam parameters. This allows tailoring both, mean proton energy and spot sizes, yet keeping the system compact. We performed a theoretical study optimizing a beamline for laser-PIXE applications. Our design enables monochromatizing the beam and shaping its final spot size. We obtain spot sizes ranging between a fraction of mm up to cm scale at a fraction of nC proton charge per shot. These results pave the way for a versatile and tunable laserPIXE at a multi-Hz repetition rate using modern commercially available laser systems