3,320 research outputs found
A Scalable Correlator Architecture Based on Modular FPGA Hardware, Reuseable Gateware, and Data Packetization
A new generation of radio telescopes is achieving unprecedented levels of
sensitivity and resolution, as well as increased agility and field-of-view, by
employing high-performance digital signal processing hardware to phase and
correlate large numbers of antennas. The computational demands of these imaging
systems scale in proportion to BMN^2, where B is the signal bandwidth, M is the
number of independent beams, and N is the number of antennas. The
specifications of many new arrays lead to demands in excess of tens of PetaOps
per second.
To meet this challenge, we have developed a general purpose correlator
architecture using standard 10-Gbit Ethernet switches to pass data between
flexible hardware modules containing Field Programmable Gate Array (FPGA)
chips. These chips are programmed using open-source signal processing libraries
we have developed to be flexible, scalable, and chip-independent. This work
reduces the time and cost of implementing a wide range of signal processing
systems, with correlators foremost among them,and facilitates upgrading to new
generations of processing technology. We present several correlator
deployments, including a 16-antenna, 200-MHz bandwidth, 4-bit, full Stokes
parameter application deployed on the Precision Array for Probing the Epoch of
Reionization.Comment: Accepted to Publications of the Astronomy Society of the Pacific. 31
pages. v2: corrected typo, v3: corrected Fig. 1
Design and Implementation of an RNS-based 2D DWT Processor
No abstract availabl
Architectures for block Toeplitz systems
In this paper efficient VLSI architectures of highly concurrent algorithms for the solution of block linear systems with Toeplitz or near-to-Toeplitz entries are presented. The main features of the proposed scheme are the use of scalar only operations, multiplications/divisions and additions, and the local communication which enables the development of wavefront array architecture. Both the mean squared error and the total squared error formulations are described and a variety of implementations are given
Lessons Learned from Designing the Montium - a Coarse-Grained Reconfigurable Processing Tile
In this paper we describe in retrospective the main results of a four year project, called Chameleon. As part of this project we developed a coarse-grained reconfigurable core for DSP algorithms in wirelessdevices denoted MONTIUM. After presenting the main achievements within this project we present the lessons learned from this project
NIKEL: Electronics and data acquisition for kilopixels kinetic inductance camera
A prototype of digital frequency multiplexing electronics allowing the real
time monitoring of microwave kinetic inductance detector (MKIDs) arrays for
mm-wave astronomy has been developed. Thanks to the frequency multiplexing, it
can monitor simultaneously 400 pixels over a 500 MHz bandwidth and requires
only two coaxial cables for instrumenting such a large array. The chosen
solution and the performances achieved are presented in this paper.Comment: 21 pages, 14 figure
- âŠ