Smart Chips for Smart Surroundings -- 4S

The overall mission of the 4S project (Smart Chips for Smart Surroundings) was to define and develop efficient flexible, reconfigurable core building blocks, including the supporting tools, for future Ambient System Devices. Reconfigurability offers the needed flexibility and adaptability, it provides the efficiency needed for these systems, it enables systems that can adapt to rapidly changing environmental conditions, it enables communication over heterogeneous wireless networks, and it reduces risks: reconfigurable systems can adapt to standards that may vary from place to place or standards that have changed during and after product development. In 4S we focused on heterogeneous building blocks such as analogue, hardwired functions, fine and coarse grain reconfigurable tiles and microprocessors. Such a platform can adapt to a wide application space without the need for specialized ASICs. A novel power aware design flow and runtime system was developed. The runtime system decides dynamically about the near-optimal application mapping to the given hardware platform. The overall concept was verified on hardware platforms based on an existing SoC and in a second step with novel silicon. DRM (Digital Radio Mondiale) and MPEG4 Video applications have been implemented on the platforms demonstrating the adaptability of the 4S concept

The Chameleon Architecture for Streaming DSP Applications

We focus on architectures for streaming DSP applications such as wireless baseband processing and image processing. We aim at a single generic architecture that is capable of dealing with different DSP applications. This architecture has to be energy efficient and fault tolerant. We introduce a heterogeneous tiled architecture and present the details of a domain-specific reconfigurable tile processor called Montium. This reconfigurable processor has a small footprint (1.8 mm$^2$ in a 130 nm process), is power efficient and exploits the locality of reference principle. Reconfiguring the device is very fast, for example, loading the coefficients for a 200 tap FIR filter is done within 80 clock cycles. The tiles on the tiled architecture are connected to a Network-on-Chip (NoC) via a network interface (NI). Two NoCs have been developed: a packet-switched and a circuit-switched version. Both provide two types of services: guaranteed throughput (GT) and best effort (BE). For both NoCs estimates of power consumption are presented. The NI synchronizes data transfers, configures and starts/stops the tile processor. For dynamically mapping applications onto the tiled architecture, we introduce a run-time mapping tool

Optimising and evaluating designs for reconfigurable hardware

Growing demand for computational performance, and the rising cost for chip design and manufacturing make reconfigurable hardware increasingly attractive for digital system implementation. Reconfigurable hardware, such as field-programmable gate arrays (FPGAs), can deliver performance through parallelism while also providing flexibility to enable application builders to reconfigure them. However, reconfigurable systems, particularly those involving run-time reconfiguration, are often developed in an ad-hoc manner. Such an approach usually results in low designer productivity and can lead to inefficient designs. This thesis covers three main achievements that address this situation. The first achievement is a model that captures design parameters of reconfigurable hardware and performance parameters of a given application domain. This model supports optimisations for several design metrics such as performance, area, and power consumption. The second achievement is a technique that enhances the relocatability of bitstreams for reconfigurable devices, taking into account heterogeneous resources. This method increases the flexibility of modules represented by these bitstreams while reducing configuration storage size and design compilation time. The third achievement is a technique to characterise the power consumption of FPGAs in different activity modes. This technique includes the evaluation of standby power and dedicated low-power modes, which are crucial in meeting the requirements for battery-based mobile devices

Survey of FPGA applications in the period 2000 – 2015 (Technical Report)

Romoth J, Porrmann M, Rückert U. Survey of FPGA applications in the period 2000 – 2015 (Technical Report).; 2017.Since their introduction, FPGAs can be seen in more and more different fields of applications. The key advantage is the combination of software-like flexibility with the performance otherwise common to hardware. Nevertheless, every application field introduces special requirements to the used computational architecture. This paper provides an overview of the different topics FPGAs have been used for in the last 15 years of research and why they have been chosen over other processing units like e.g. CPUs

High level compilation for gate reconfigurable architectures

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2001.Includes bibliographical references (p. 205-215).A continuing exponential increase in the number of programmable elements is turning management of gate-reconfigurable architectures as "glue logic" into an intractable problem; it is past time to raise this abstraction level. The physical hardware in gate-reconfigurable architectures is all low level - individual wires, bit-level functions, and single bit registers - hence one should look to the fetch-decode-execute machinery of traditional computers for higher level abstractions. Ordinary computers have machine-level architectural mechanisms that interpret instructions - instructions that are generated by a high-level compiler. Efficiently moving up to the next abstraction level requires leveraging these mechanisms without introducing the overhead of machine-level interpretation. In this dissertation, I solve this fundamental problem by specializing architectural mechanisms with respect to input programs. This solution is the key to efficient compilation of high-level programs to gate reconfigurable architectures. My approach to specialization includes several novel techniques. I develop, with others, extensive bitwidth analyses that apply to registers, pointers, and arrays. I use pointer analysis and memory disambiguation to target devices with blocks of embedded memory. My approach to memory parallelization generates a spatial hierarchy that enables easier-to-synthesize logic state machines with smaller circuits and no long wires.(cont.) My space-time scheduling approach integrates the techniques of high-level synthesis with the static routing concepts developed for single-chip multiprocessors. Using DeepC, a prototype compiler demonstrating my thesis, I compile a new benchmark suite to Xilinx Virtex FPGAs. Resulting performance is comparable to a custom MIPS processor, with smaller area (40 percent on average), higher evaluation speeds (2.4x), and lower energy (18x) and energy-delay (45x). Specialization of advanced mechanisms results in additional speedup, scaling with hardware area, at the expense of power. For comparison, I also target IBM's standard cell SA-27E process and the RAW microprocessor. Results include sensitivity analysis to the different mechanisms specialized and a grand comparison between alternate targets.by Jonathan William Babb.Ph.D

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

Generic low power reconfigurable distributed arithmetic processor

Higher performance, lower cost, increasingly minimizing integrated circuit components, and higher packaging density of chips are ongoing goals of the microelectronic and computer industry. As these goals are being achieved, however, power consumption and flexibility are increasingly becoming bottlenecks that need to be addressed with the new technology in Very Large-Scale Integrated (VLSI) design. For modern systems, more energy is required to support the powerful computational capability which accords with the increasing requirements, and these requirements cause the change of standards not only in audio and video broadcasting but also in communication such as wireless connection and network protocols. Powerful flexibility and low consumption are repellent, but their combination in one system is the ultimate goal of designers. A generic domain-specific low-power reconfigurable processor for the distributed arithmetic algorithm is presented in this dissertation. This domain reconfigurable processor features high efficiency in terms of area, power and delay, which approaches the performance of an ASIC design, while retaining the flexibility of programmable platforms. The architecture not only supports typical distributed arithmetic algorithms which can be found in most still picture compression standards and video conferencing standards, but also offers implementation ability for other distributed arithmetic algorithms found in digital signal processing, telecommunication protocols and automatic control. In this processor, a simple reconfigurable low power control unit is implemented with good performance in area, power and timing. The generic characteristic of the architecture makes it applicable for any small and medium size finite state machines which can be used as control units to implement complex system behaviour and can be found in almost all engineering disciplines. Furthermore, to map target applications efficiently onto the proposed architecture, a new algorithm is introduced for searching for the best common sharing terms set and it keeps the area and power consumption of the implementation at low level. The software implementation of this algorithm is presented, which can be used not only for the proposed architecture in this dissertation but also for all the implementations with adder-based distributed arithmetic algorithms. In addition, some low power design techniques are applied in the architecture, such as unsymmetrical design style including unsymmetrical interconnection arranging, unsymmetrical PTBs selection and unsymmetrical mapping basic computing units. All these design techniques achieve extraordinary power consumption saving. It is believed that they can be extended to more low power designs and architectures. The processor presented in this dissertation can be used to implement complex, high performance distributed arithmetic algorithms for communication and image processing applications with low cost in area and power compared with the traditional methods