No-reference analysis of decoded MPEG images for PSNR estimation and post-processing

We propose no-reference analysis and processing of DCT (Discrete Cosine Transform) coded images based on estimation of selected MPEG parameters from the decoded video. The goal is to assess MPEG video quality and perform post-processing without access to neither the original stream nor the code stream. Solutions are presented for MPEG-2 video. A method to estimate the quantization parameters of DCT coded images and MPEG I-frames at the macro-block level is presented. The results of this analysis is used for deblocking and deringing artifact reduction and no-reference PSNR estimation without code stream access. An adaptive deringing method using texture classification is presented. On the test set, the quantization parameters in MPEG-2 I-frames are estimated with an overall accuracy of 99.9% and the PSNR is estimated with an overall average error of 0.3dB. The deringing and deblocking algorithms yield improvements of 0.3dB on the MPEG-2 decoded test sequences

A hybrid system for video compression based on H.264 and JPEG2000

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.Includes bibliographical references (leaves 55-56).A video compression system is created that combines the JPEG2000 and H.264 standards. JPEG2000 is used to encode the I-frames, while H.264 is used to encode the P-frames. The goal of this thesis is to evaluate the performance of this hybrid system. The system is evaluated using a set of eight test video sequences, which cover a range of resolutions (CIF to 1920 x 1080) and picture content. Rate-distortion performance analysis shows the two systems to be comparable. Subjective analysis reveals that the artifacts of JPEG2000 are propagated to the P-frames. This can be useful in reducing blocking artifacts at low bit-rates. However, blurriness and fuzzy edges, which are the artifacts of JPEG2000, replace the blocking artifacts.by Zhenya Gu.M.Eng

Development of Some Efficient Lossless and Lossy Hybrid Image Compression Schemes

Digital imaging generates a large amount of data which needs to be compressed, without loss of relevant information, to economize storage space and allow speedy data transfer. Though both storage and transmission medium capacities have been continuously increasing over the last two decades, they dont match the present requirement. Many lossless and lossy image compression schemes exist for compression of images in space domain and transform domain. Employing more than one traditional image compression algorithms results in hybrid image compression techniques. Based on the existing schemes, novel hybrid image compression schemes are developed in this doctoral research work, to compress the images effectually maintaining the quality

Adaptive Nonlocal Signal Restoration and Enhancement Techniques for High-Dimensional Data

The large number of practical applications involving digital images has motivated a significant interest towards restoration solutions that improve the visual quality of the data under the presence of various acquisition and compression artifacts. Digital images are the results of an acquisition process based on the measurement of a physical quantity of interest incident upon an imaging sensor over a specified period of time. The quantity of interest depends on the targeted imaging application. Common imaging sensors measure the number of photons impinging over a dense grid of photodetectors in order to produce an image similar to what is perceived by the human visual system. Different applications focus on the part of the electromagnetic spectrum not visible by the human visual system, and thus require different sensing technologies to form the image. In all cases, even with the advance of technology, raw data is invariably affected by a variety of inherent and external disturbing factors, such as the stochastic nature of the measurement processes or challenging sensing conditions, which may cause, e.g., noise, blur, geometrical distortion and color aberration. In this thesis we introduce two filtering frameworks for video and volumetric data restoration based on the BM3D grouping and collaborative filtering paradigm. In its general form, the BM3D paradigm leverages the correlation present within a nonlocal emph{group} composed of mutually similar basic filtering elements, e.g., patches, to attain an enhanced sparse representation of the group in a suitable transform domain where the energy of the meaningful part of the signal can be thus separated from that of the noise through coefficient shrinkage. We argue that the success of this approach largely depends on the form of the used basic filtering elements, which in turn define the subsequent spectral representation of the nonlocal group. Thus, the main contribution of this thesis consists in tailoring specific basic filtering elements to the the inherent characteristics of the processed data at hand. Specifically, we embed the local spatial correlation present in volumetric data through 3-D cubes, and the local spatial and temporal correlation present in videos through 3-D spatiotemporal volumes, i.e. sequences of 2-D blocks following a motion trajectory. The foundational aspect of this work is the analysis of the particular spectral representation of these elements. Specifically, our frameworks stack mutually similar 3-D patches along an additional fourth dimension, thus forming a 4-D data structure. By doing so, an effective group spectral description can be formed, as the phenomena acting along different dimensions in the data can be precisely localized along different spectral hyperplanes, and thus different filtering shrinkage strategies can be applied to different spectral coefficients to achieve the desired filtering results. This constitutes a decisive difference with the shrinkage traditionally employed in BM3D-algorithms, where different hyperplanes of the group spectrum are shrunk subject to the same degradation model. Different image processing problems rely on different observation models and typically require specific algorithms to filter the corrupted data. As a consequent contribution of this thesis, we show that our high-dimensional filtering model allows to target heterogeneous noise models, e.g., characterized by spatial and temporal correlation, signal-dependent distributions, spatially varying statistics, and non-white power spectral densities, without essential modifications to the algorithm structure. As a result, we develop state-of-the-art methods for a variety of fundamental image processing problems, such as denoising, deblocking, enhancement, deflickering, and reconstruction, which also find practical applications in consumer, medical, and thermal imaging

Video enhancement : content classification and model selection

The purpose of video enhancement is to improve the subjective picture quality. The field of video enhancement includes a broad category of research topics, such as removing noise in the video, highlighting some specified features and improving the appearance or visibility of the video content. The common difficulty in this field is how to make images or videos more beautiful, or subjectively better. Traditional approaches involve lots of iterations between subjective assessment experiments and redesigns of algorithm improvements, which are very time consuming. Researchers have attempted to design a video quality metric to replace the subjective assessment, but so far it is not successful. As a way to avoid heuristics in the enhancement algorithm design, least mean square methods have received considerable attention. They can optimize filter coefficients automatically by minimizing the difference between processed videos and desired versions through a training. However, these methods are only optimal on average but not locally. To solve the problem, one can apply the least mean square optimization for individual categories that are classified by local image content. The most interesting example is Kondo’s concept of local content adaptivity for image interpolation, which we found could be generalized into an ideal framework for content adaptive video processing. We identify two parts in the concept, content classification and adaptive processing. By exploring new classifiers for the content classification and new models for the adaptive processing, we have generalized a framework for more enhancement applications. For the part of content classification, new classifiers have been proposed to classify different image degradations such as coding artifacts and focal blur. For the coding artifact, a novel classifier has been proposed based on the combination of local structure and contrast, which does not require coding block grid detection. For the focal blur, we have proposed a novel local blur estimation method based on edges, which does not require edge orientation detection and shows more robust blur estimation. With these classifiers, the proposed framework has been extended to coding artifact robust enhancement and blur dependant enhancement. With the content adaptivity to more image features, the number of content classes can increase significantly. We show that it is possible to reduce the number of classes without sacrificing much performance. For the part of model selection, we have introduced several nonlinear filters to the proposed framework. We have also proposed a new type of nonlinear filter, trained bilateral filter, which combines both advantages of the original bilateral filter and the least mean square optimization. With these nonlinear filters, the proposed framework show better performance than with linear filters. Furthermore, we have shown a proof-of-concept for a trained approach to obtain contrast enhancement by a supervised learning. The transfer curves are optimized based on the classification of global or local image content. It showed that it is possible to obtain the desired effect by learning from other computationally expensive enhancement algorithms or expert-tuned examples through the trained approach. Looking back, the thesis reveals a single versatile framework for video enhancement applications. It widens the application scope by including new content classifiers and new processing models and offers scalabilities with solutions to reduce the number of classes, which can greatly accelerate the algorithm design

Enhancement to the patient's health care image encryption system, using several layers of DNA computing and AES (MLAESDNA)

Keeping patient health data private has been a big issue for decades, and this issue will not go away anytime soon. As an integral part of many developing technologies, cryptographic Internet communications ICs (e.g. fog computing and cloud computing) are a main focus of IoT research. Just keep trying all the potential keys until you find the correct one. New and future technologies must have a model of DNA cryptography in order to assure the efficient flow of these technologies. Public-key cryptography is also required to make DNA sequence testing devices for the Internet of Things interoperable. This method employs DNA layers and AES in such a way that it may be easier to design a trustworthy hybrid encryption algorithm that uses DNA layers and AES. In order to guard against brute-force decryption attacks, DNA sequences are encrypted using three keys: (I) the main key, which is the key to the AES encryption algorithm; (II) the rule 1 key, which is the base DNA structure; and (III) the rule 2 key, which is the DNA helical structure binding probability. This key was created with increased security in mind. multi-layered AES encryption and DNA computing were applied to "Covid 19" images in this research (MLAESDNA). With cloud computing, the MLAESDNA team was able to show that IoT signals could be enhanced with encrypted data