Scenario driven requirement engineering for design and deployment of mobile communication networks

The numbers of users and usage of mobile data service are increasing dramatically due to the introduction of smartphones and mobile broadband dongles. For the next decade the mobile broadband market is expected to grow and reach a level where the average data consumption per user is orders of magnitude greater than today. For the telecom industry it is a magnificent challenge to design and deploy these s high-capacity wireless networks taking into account limitations in cost, energy and radio spectrum. The objective of this paper is to highlight the need to consider a multitude of scenarios for the requirements, design and deployment of mobile broad band networks. The R&D has for many years been targeting high peak data rates enabled by improved spectral efficiency, adding more spectrum bands, aggregation of frequency bands and offloading to local wireless networks connected via public fixed phones or broadband. However, many of these features driving the technology development are representative for the conditions in US and Western Europe. The wireless networks also need to be designed assuming deployment in regions in the world where both the availability of spectrum as well as the penetration of fixed phones and broadband are limited. --Mobile broadband networks,cost and capacity,spectrum,deployment strategies,telecommunications,management of technology and R&D,economic development of natural resources

Load balancing using cell range expansion in LTE advanced heterogeneous networks

The use of heterogeneous networks is on the increase, fueled by consumer demand for more data. The main objective of heterogeneous networks is to increase capacity. They offer solutions for efficient use of spectrum, load balancing and improvement of cell edge coverage amongst others. However, these solutions have inherent challenges such as inter-cell interference and poor mobility management. In heterogeneous networks there is transmit power disparity between macro cell and pico cell tiers, which causes load imbalance between the tiers. Due to the conventional user-cell association strategy, whereby users associate to a base station with the strongest received signal strength, few users associate to small cells compared to macro cells. To counter the effects of transmit power disparity, cell range expansion is used instead of the conventional strategy. The focus of our work is on load balancing using cell range expansion (CRE) and network utility optimization techniques to ensure fair sharing of load in a macro and pico cell LTE Advanced heterogeneous network. The aim is to investigate how to use an adaptive cell range expansion bias to optimize Pico cell coverage for load balancing. Reviewed literature points out several approaches to solve the load balancing problem in heterogeneous networks, which include, cell range expansion and utility function optimization. Then, we use cell range expansion, and logarithmic utility functions to design a load balancing algorithm. In the algorithm, user and base station associations are optimized by adapting CRE bias to pico base station load status. A price update mechanism based on a suboptimal solution of a network utility optimization problem is used to adapt the CRE bias. The price is derived from the load status of each pico base station. The performance of the algorithm was evaluated by means of an LTE MATLAB toolbox. Simulations were conducted according to 3GPP and ITU guidelines for modelling heterogeneous networks and propagation environment respectively. Compared to a static CRE configuration, the algorithm achieved more fairness in load distribution. Further, it achieved a better trade-off between cell edge and cell centre user throughputs. [Please note: this thesis file has been deferred until December 2016

Fundamentals of Inter-cell Overhead Signaling in Heterogeneous Cellular Networks

Heterogeneous base stations (e.g. picocells, microcells, femtocells and distributed antennas) will become increasingly essential for cellular network capacity and coverage. Up until now, little basic research has been done on the fundamentals of managing so much infrastructure -- much of it unplanned -- together with the carefully planned macro-cellular network. Inter-cell coordination is in principle an effective way of ensuring different infrastructure components behave in a way that increases, rather than decreases, the key quality of service (QoS) metrics. The success of such coordination depends heavily on how the overhead is shared, and the rate and delay of the overhead sharing. We develop a novel framework to quantify overhead signaling for inter-cell coordination, which is usually ignored in traditional 1-tier networks, and assumes even more importance in multi-tier heterogeneous cellular networks (HCNs). We derive the overhead quality contour for general K-tier HCNs -- the achievable set of overhead packet rate, size, delay and outage probability -- in closed-form expressions or computable integrals under general assumptions on overhead arrivals and different overhead signaling methods (backhaul and/or wireless). The overhead quality contour is further simplified for two widely used models of overhead arrivals: Poisson and deterministic arrival process. This framework can be used in the design and evaluation of any inter-cell coordination scheme. It also provides design insights on backhaul and wireless overhead channels to handle specific overhead signaling requirements.Comment: 21 pages, 9 figure

Green Cellular Networks: A Survey, Some Research Issues and Challenges

Energy efficiency in cellular networks is a growing concern for cellular operators to not only maintain profitability, but also to reduce the overall environment effects. This emerging trend of achieving energy efficiency in cellular networks is motivating the standardization authorities and network operators to continuously explore future technologies in order to bring improvements in the entire network infrastructure. In this article, we present a brief survey of methods to improve the power efficiency of cellular networks, explore some research issues and challenges and suggest some techniques to enable an energy efficient or "green" cellular network. Since base stations consume a maximum portion of the total energy used in a cellular system, we will first provide a comprehensive survey on techniques to obtain energy savings in base stations. Next, we discuss how heterogeneous network deployment based on micro, pico and femto-cells can be used to achieve this goal. Since cognitive radio and cooperative relaying are undisputed future technologies in this regard, we propose a research vision to make these technologies more energy efficient. Lastly, we explore some broader perspectives in realizing a "green" cellular network technologyComment: 16 pages, 5 figures, 2 table