2,291 research outputs found
Adaptive channel selection for DOA estimation in MIMO radar
We present adaptive strategies for antenna selection for Direction of Arrival
(DoA) estimation of a far-field source using TDM MIMO radar with linear arrays.
Our treatment is formulated within a general adaptive sensing framework that
uses one-step ahead predictions of the Bayesian MSE using a parametric family
of Weiss-Weinstein bounds that depend on previous measurements. We compare in
simulations our strategy with adaptive policies that optimize the Bobrovsky-
Zaka{\i} bound and the Expected Cram\'er-Rao bound, and show the performance
for different levels of measurement noise.Comment: Submitted to the 25th European Signal Processing Conference
(EUSIPCO), 201
Robust Design of Transmit Waveform and Receive Filter For Colocated MIMO Radar
We consider the problem of angle-robust joint transmit waveform and receive
filter design for colocated Multiple-Input Multiple-Output (MIMO) radar, in the
presence of signal-dependent interferences. The design problem is cast as a
max-min optimization problem to maximize the worst-case output
signal-to-interference-plus-noise-ratio (SINR) with respect to the unknown
angle of the target of interest. Based on rank-one relaxation and semi-definite
programming (SDP) representation of a nonnegative trigonometric polynomial, a
cyclic optimization algorithm is proposed to tackle this problem. The
effectiveness of the proposed method is illustrated via numerical examples.Comment: 6 pages, 13 figures, part of this work was submitted to IEEE Signal
Processing Letters; (short introduction; typos corrected; revised statement
in section III-B and IV; revised figure labels
MIMO Radar Waveform Optimization With Prior Information of the Extended Target and Clutter
The concept of multiple-input multiple-output (MIMO) radar allows each transmitting antenna element to transmit an arbitrary waveform. This provides extra degrees of freedom compared to the traditional transmit beamforming approach. It has been shown in the recent literature that MIMO radar systems have many advantages. In this paper, we consider the joint optimization of waveforms and receiving filters in the MIMO radar for the case of extended target in clutter. A novel iterative algorithm is proposed to optimize the waveforms and receiving filters such that the detection performance can be maximized. The corresponding iterative algorithms are also developed for the case where only the statistics or the uncertainty set of the target impulse response is available. These algorithms guarantee that the SINR performance improves in each iteration step. Numerical results show that the proposed methods have better SINR performance than existing design methods
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
Efficient Transmit Beamspace Design for Search-free Based DOA Estimation in MIMO Radar
In this paper, we address the problem of transmit beamspace design for
multiple-input multiple-output (MIMO) radar with colocated antennas in
application to direction-of-arrival (DOA) estimation. A new method for
designing the transmit beamspace matrix that enables the use of search-free DOA
estimation techniques at the receiver is introduced. The essence of the
proposed method is to design the transmit beamspace matrix based on minimizing
the difference between a desired transmit beampattern and the actual one under
the constraint of uniform power distribution across the transmit array
elements. The desired transmit beampattern can be of arbitrary shape and is
allowed to consist of one or more spatial sectors. The number of transmit
waveforms is even but otherwise arbitrary. To allow for simple search-free DOA
estimation algorithms at the receive array, the rotational invariance property
is established at the transmit array by imposing a specific structure on the
beamspace matrix. Semi-definite relaxation is used to transform the proposed
formulation into a convex problem that can be solved efficiently. We also
propose a spatial-division based design (SDD) by dividing the spatial domain
into several subsectors and assigning a subset of the transmit beams to each
subsector. The transmit beams associated with each subsector are designed
separately. Simulation results demonstrate the improvement in the DOA
estimation performance offered by using the proposed joint and SDD transmit
beamspace design methods as compared to the traditional MIMO radar technique.Comment: 32 pages, 10 figures, submitted to the IEEE Trans. Signal Processing
in May 201
Target Localization Accuracy Gain in MIMO Radar Based Systems
This paper presents an analysis of target localization accuracy, attainable
by the use of MIMO (Multiple-Input Multiple-Output) radar systems, configured
with multiple transmit and receive sensors, widely distributed over a given
area. The Cramer-Rao lower bound (CRLB) for target localization accuracy is
developed for both coherent and non-coherent processing. Coherent processing
requires a common phase reference for all transmit and receive sensors. The
CRLB is shown to be inversely proportional to the signal effective bandwidth in
the non-coherent case, but is approximately inversely proportional to the
carrier frequency in the coherent case. We further prove that optimization over
the sensors' positions lowers the CRLB by a factor equal to the product of the
number of transmitting and receiving sensors. The best linear unbiased
estimator (BLUE) is derived for the MIMO target localization problem. The
BLUE's utility is in providing a closed form localization estimate that
facilitates the analysis of the relations between sensors locations, target
location, and localization accuracy. Geometric dilution of precision (GDOP)
contours are used to map the relative performance accuracy for a given layout
of radars over a given geographic area.Comment: 36 pages, 5 figures, submitted to IEEE Transaction on Information
Theor
- âŠ