An Omnidirectional Aerial Manipulation Platform for Contact-Based Inspection

This paper presents an omnidirectional aerial manipulation platform for robust and responsive interaction with unstructured environments, toward the goal of contact-based inspection. The fully actuated tilt-rotor aerial system is equipped with a rigidly mounted end-effector, and is able to exert a 6 degree of freedom force and torque, decoupling the system's translational and rotational dynamics, and enabling precise interaction with the environment while maintaining stability. An impedance controller with selective apparent inertia is formulated to permit compliance in certain degrees of freedom while achieving precise trajectory tracking and disturbance rejection in others. Experiments demonstrate disturbance rejection, push-and-slide interaction, and on-board state estimation with depth servoing to interact with local surfaces. The system is also validated as a tool for contact-based non-destructive testing of concrete infrastructure.Comment: Accepted submission to Robotics: Science and Systems conference 2019. 9 pages, 12 figure

Fundamental Limitations of Disturbance Attenuation in the Presence of Side Information

In this paper, we study fundamental limitations of disturbance attenuation of feedback systems, under the assumption that the controller has a finite horizon preview of the disturbance. In contrast with prior work, we extend Bode's integral equation for the case where the preview is made available to the controller via a general, finite capacity, communication system. Under asymptotic stationarity assumptions, our results show that the new fundamental limitation differs from Bode's only by a constant, which quantifies the information rate through the communication system. In the absence of asymptotic stationarity, we derive a universal lower bound which uses Shannon's entropy rate as a measure of performance. By means of a case-study, we show that our main bounds may be achieved

Efficient quantum key distribution over a collective noise channel

We present two efficient quantum key distribution schemes over two different collective-noise channels. The accepted hypothesis of collective noise is that photons travel inside a time window small compared to the variation of noise. Noiseless subspaces are made up of two Bell states and the spatial degree of freedom is introduced to form two nonorthogonal bases. Although these protocols resort to entangled states for encoding the key bit, the receiver is only required to perform single-particle product measurements and there is no basis mismatch. Moreover, the detection is passive as the receiver does not switch his measurements between two conjugate measurement bases to get the key.Comment: 6 pages, 1 figure; the revised version of the paper published in Phys. Rev. A 78, 022321 (2008). Some negligible errors on the error rates of eavesdropping check are correcte

Neural Network Based Min-Max Predictive Control. Application to a Heat Exchanger

IFAC Adaptation and Learning in Control and Signal Processing. Cemobbio-Como. Italy. 2001Min-max model predictive controllers (MMMPC) have been proposed for the control of linear plants subject to bounded uncertainties. The implementation of MMMPC suffers a large computational burden due to the numerical optimization problem that has to be solved at every sampling time. This fact severely limits the class of processes in which this control is suitable. In this paper the use of a Neural Network (NN) to approximate the solution of the min-max problem is proposed. The number of inputs of the NN is determined by the order and time delay of the model together with the control horizon. For large time delays the number of inputs can be prohibitive. A modification to the basic formulation is proposed in order to avoid this later problem. Simulation and experimental results are given using a heat exchanger

A Self-Tuning zSlices-Based General Type-2 Fuzzy PI Controller

The interval type-2 fuzzy Proportional-Integral (PI) controller (IT2-FPI) might be able to handle high levels of uncertainties to produce a satisfactory control performance, which could be potentially due to the robust performance as a result of the smoother control surface around the steady state. However, the transient state and disturbance rejection performance of the IT2-FPI may degrade in comparison with the type-1 fuzzy PI (T1-FPI) counterpart. This drawback can be resolved via general type-2 fuzzy PI controllers which can provide a tradeoff between the robust control performance of the IT2-FPI and the acceptable transient and disturbance rejection performance of the type-1 PI controllers. In this paper, we will present a zSlices-based general type-2 fuzzy PI controller (zT2-FPI), where the secondary membership functions (SMFs) of the antecedent general type-2 fuzzy sets are adjusted in an online manner. We will examine the effect of the SMF on the closed-system control performance to investigate their induced performance improvements. This paper will focus on the case followed in conventional or self-tuning fuzzy controller design strategies, where the aim is to decrease the integral action sufficiently around the steady state to have robust system performance against noises and parameter variations. The zSlices approach will give the opportunity to construct the zT2-FPI controller as a collection of IT2-FPI and T1-FPI controllers. We will present a new way to design a zT2-FPI controller based on a single tuning parameter where the features of T1-FPI (speed) and IT2-FPI (robustness) are combined without increasing the computational complexity much when compared with the IT2-FPI structure. This will allow the proposed zT2-FPI controller to achieve the desired transient state response and provide an efficient disturbance rejection and robust control performance. We will present several simulation studies on benchmark systems, in addition to real-world experiments that were performed using the PIONEER 3-DX mobile robot that will act as a platform to evaluate the proposed systems. The results will show that the control performance of the self-tuning zT2-FPI control structure enhances both the transient state and disturbance rejection performances when compared with the type-1 and IT2-FPI counterparts. In addition, the self-tuning zT2-FPI is more robust to disturbances, noise, and uncertainties when compared with the type-1 and interval type-2 fuzzy counterparts

Optimal control of ankle joint moment: Toward unsupported standing in paraplegia

This paper considers part of the problem of how to provide unsupported standing for paraplegics by feedback control. In this work our overall objective is to stabilize the subject by stimulation only of his ankle joints while the other joints are braced, Here, we investigate the problem of ankle joint moment control. The ankle plantarflexion muscles are first identified with pseudorandom binary sequence (PRBS) signals, periodic sinusoidal signals, and twitches. The muscle is modeled in Hammerstein form as a static recruitment nonlinearity followed by a linear transfer function. A linear-quadratic-Gaussian (LQG)-optimal controller design procedure for ankle joint moment was proposed based on the polynomial equation formulation, The approach was verified by experiments in the special Wobbler apparatus with a neurologically intact subject, and these experimental results are reported. The controller structure is formulated in such a way that there are only two scalar design parameters, each of which has a clear physical interpretation. This facilitates fast controller synthesis and tuning in the laboratory environment. Experimental results show the effects of the controller tuning parameters: the control weighting and the observer response time, which determine closed-loop properties. Using these two parameters the tradeoff between disturbance rejection and measurement noise sensitivity can be straightforwardly balanced while maintaining a desired speed of tracking. The experimentally measured reference tracking, disturbance rejection, and noise sensitivity are good and agree with theoretical expectations