317 research outputs found
Symbol-Level Multiuser MISO Precoding for Multi-level Adaptive Modulation
Symbol-level precoding is a new paradigm for multiuser downlink systems which
aims at creating constructive interference among the transmitted data streams.
This can be enabled by designing the precoded signal of the multiantenna
transmitter on a symbol level, taking into account both channel state
information and data symbols. Previous literature has studied this paradigm for
MPSK modulations by addressing various performance metrics, such as power
minimization and maximization of the minimum rate. In this paper, we extend
this to generic multi-level modulations i.e. MQAM and APSK by establishing
connection to PHY layer multicasting with phase constraints. Furthermore, we
address adaptive modulation schemes which are crucial in enabling the
throughput scaling of symbol-level precoded systems. In this direction, we
design signal processing algorithms for minimizing the required power under
per-user SINR or goodput constraints. Extensive numerical results show that the
proposed algorithm provides considerable power and energy efficiency gains,
while adapting the employed modulation scheme to match the requested data rate
Optimizing performance and energy efficiency of group communication and internet of things in cognitive radio networks
Data traffic in the wireless networks has grown at an unprecedented rate. While traditional wireless networks follow fixed spectrum assignment, spectrum scarcity problem becomes a major challenge in the next generations of wireless networks. Cognitive radio is a promising candidate technology that can mitigate this critical challenge by allowing dynamic spectrum access and increasing the spectrum utilization. As users and data traffic demands increases, more efficient communication methods to support communication in general, and group communication in particular, are needed. On the other hand, limited battery for the wireless network device in general makes it a bottleneck for enhancing the performance of wireless networks. In this thesis, the problem of optimizing the performance of group communication in CRNs is studied. Moreover, energy efficient and wireless-powered group communication in CRNs are considered. Additionally, a cognitive mobile base station and a cognitive UAV are proposed for the purpose of optimizing energy transfer and data dissemination, respectively.
First, a multi-objective optimization for many-to-many communication in CRNs is considered. Given a many-to-many communication request, the goal is to support message routing from each user in the many-to-many group to each other. The objectives are minimizing the delay and the number of used links and maximizing data rate. The network is modeled using a multi-layer hyper graph, and the secondary users\u27 transmission is scheduled after establishing the conflict graph. Due to the difficulty of solving the problem optimally, a modified version of an Ant Colony meta-heuristic algorithm is employed to solve the problem. Additionally, energy efficient multicast communication in CRNs is introduced while considering directional and omnidirectional antennas. The multicast service is supported such that the total energy consumption of data transmission and channel switching is minimized. The optimization problem is formulated as a Mixed Integer Linear Program (MILP), and a heuristic algorithm is proposed to solve the problem in polynomial time.
Second, wireless-powered machine-to-machine multicast communication in cellular networks is studied. To incentivize Internet of Things (IoT) devices to participate in forwarding the multicast messages, each IoT device participates in messages forwarding receives Radio Frequency (RF) energy form Energy Transmitters (ET) not less than the amount of energy used for messages forwarding. The objective is to minimize total transferred energy by the ETs. The problem is formulated mathematically as a Mixed Integer
Nonlinear Program (MINLP), and a Generalized Bender Decomposition with Successive Convex Programming (GBD-SCP) algorithm is introduced to get an approximate solution since there is no efficient way in general to solve the problem optimally. Moreover, another algorithm, Constraints Decomposition with SCP and Binary Variable Relaxation (CDR), is proposed to get an approximate solution in a more efficient way. On the other hand, a cognitive mobile station base is proposed to transfer data and energy to a group of IoT devices underlying a primary network. Total energy consumed by the cognitive base station in its mobility, data transmission and energy transfer is minimized. Moreover, the cognitive base station adjusts its location and transmission power and transmission schedule such that data and energy demands are supported within a certain tolerable time and the primary users are protected from harmful interference.
Finally, we consider a cognitive Unmanned Aerial Vehicle (UAV) to disseminate data to IoT devices. The UAV senses the spectrum and finds an idle channel, then it predicts when the corresponding primary user of the selected channel becomes active based on the elapsed time of the off period. Accordingly, it starts its transmission at the beginning of the next frame right after finding the channel is idle. Moreover, it decides the number of the consecutive transmission slots that it will use such that the number of interfering slots to the corresponding primary user does not exceed a certain threshold. A mathematical problem is formulated to maximize the minimum number of bits received by the IoT devices. A successive convex programming-based algorithm is used to get a solution for the problem in an efficiency way. It is shown that the used algorithm converges to a Kuhn Tucker point
Energy-Efficient Symbol-Level Precoding in Multiuser MISO Based on Relaxed Detection Region
This paper addresses the problem of exploiting interference among
simultaneous multiuser transmissions in the downlink of multiple-antenna
systems. Using symbol-level precoding, a new approach towards addressing the
multiuser interference is discussed through jointly utilizing the channel state
information (CSI) and data information (DI). The interference among the data
streams is transformed under certain conditions to a useful signal that can
improve the signal-to-interference noise ratio (SINR) of the downlink
transmissions and as a result the system's energy efficiency. In this context,
new constructive interference precoding techniques that tackle the transmit
power minimization (min power) with individual SINR constraints at each user's
receiver have been proposed. In this paper, we generalize the CI precoding
design under the assumption that the received MPSK symbol can reside in a
relaxed region in order to be correctly detected. Moreover, a weighted
maximization of the minimum SNR among all users is studied taking into account
the relaxed detection region. Symbol error rate analysis (SER) for the proposed
precoding is discussed to characterize the tradeoff between transmit power
reduction and SER increase due to the relaxation. Based on this tradeoff, the
energy efficiency performance of the proposed technique is analyzed. Finally,
extensive numerical results show that the proposed schemes outperform other
state-of-the-art techniques.Comment: Submitted to IEEE transactions on Wireless Communications. arXiv
admin note: substantial text overlap with arXiv:1408.470
Constructive Multiuser Interference in Symbol Level Precoding for the MISO Downlink Channel
This paper investigates the problem of interference among the simultaneous
multiuser transmissions in the downlink of multiple antennas systems. Using
symbol level precoding, a new approach towards the multiuser interference is
discussed along this paper. The concept of exploiting the interference between
the spatial multiuser transmissions by jointly utilizing the data information
(DI) and channel state information (CSI), in order to design symbol-level
precoders, is proposed. In this direction, the interference among the data
streams is transformed under certain conditions to useful signal that can
improve the signal to interference noise ratio (SINR) of the downlink
transmissions. We propose a maximum ratio transmission (MRT) based algorithm
that jointly exploits DI and CSI to glean the benefits from constructive
multiuser interference. Subsequently, a relation between the constructive
interference downlink transmission and physical layer multicasting is
established. In this context, novel constructive interference precoding
techniques that tackle the transmit power minimization (min power) with
individual SINR constraints at each user's receivers is proposed. Furthermore,
fairness through maximizing the weighted minimum SINR (max min SINR) of the
users is addressed by finding the link between the min power and max min SINR
problems. Moreover, heuristic precoding techniques are proposed to tackle the
weighted sum rate problem. Finally, extensive numerical results show that the
proposed schemes outperform other state of the art techniques.Comment: Submitted to IEEE Transactions on Signal Processin
- …