Demonstrator for Selectively Compliant Morphing Systems with Multi-stable Structures

The field of morphing wings presents significant potential for increasing the efficiency of aircraft. Conventional designs used in the industry limit the adaptability of aerodynamic surfaces to address an engineering trade-off between load-carrying and compliance. This same trade-off remains a factor in morphing wings, which must also balance weight considerations while attempting to remain competitive with conventional designs. The current state-of-the-art in morphing wings is briefly described in this work. This is followed by an investigation into a new application of the principle of selective stiffness, by which local changes in stiffness may be applied to affect the global structural characteristics. In this manner, this trade-off is addressed by providing the ability to allow a deformation mode when undergoing shape change and restrict it when sustained load-carrying is required. This principle has previously been explored using pre-stressed composite laminates to produce a bi-stable structure with unique curvature in each stable state. Geometrically bi-stable structures are explored for the same purpose in this research. Three types of bi-stable element are explored and presented. The last of these is then embedded in a simple airfoil concept. The placement and geometry of this element are optimized, and a physical model is produced using additive manufacturing. This physical model is finally mechanically tested to assess the stiffness in each stable state of the embedded element

Path-designed 3D printing for topological optimized continuous carbon fibre reinforced composite structures

In current 3D printing technologies, it remains a great challenge to print continuous carbon fibre reinforced composites with complex shapes and high mechanical performances. The main reason lies in the limitation of printing path design, which cannot guarantee to print carbon fibres along load transmission paths of composite parts. Here we address this issue by proposing an ingenious path-designed 3D (PD-3D) printing approach that considers the load transmission path and anisotropic property of the continuous carbon fibre reinforced filament. Complex structures of carbon fibre reinforced composites, with enhanced lightweight, were demonstrated. Such structures of carbon fibres paving along load transmission paths, greatly reduce stress concentration and achieve a quasi-isotropic performance. By comparing printed specimens with drilled holes and semicircles, the PD-3D printed specimens with holes and semicircles are 67.5% and 62.4% higher in tensile and flexural strength, respectively. And the strength to weight ratio of the tensile and flexural specimens also increase by 55.1% and 35.2%, compared with the drilled ones

Analysis to Support Design for Additive Manufacturing with Desktop 3D Printing

[ES] En los últimos años, la fabricación aditiva a través de la extrusión de materiales ha experimentado un desarrollo y adopción acelerados gracias a la amplia disponibilidad de máquinas y materiales de bajo costo. El tamaño de estas máquinas se ha reducido del tamaño del taller al tamaño del escritorio, lo que permite su uso en configuraciones de oficina o en el hogar. Este cambio ha permitido la adopción de la tecnología por la gama más amplia de usuarios que nunca, con o sin experiencia en diseño de ingeniería. Este nuevo paradigma ha creado el desafío de cómo habilitar que estos nuevos usuarios aprovechen las capacidades proporcionadas por esta tecnología. Esta tecnología permite la creación de geometrías complejas y productos personalizados con un coste inferior a los procesos de fabricación convencionales. Además, la gran cantidad de usuarios dispuestos a compartir sus diseños permite encontrar soluciones de diseño desde otros diseñadores. Sin embargo, la amplia gama de configuraciones de máquina, parámetros y materiales requiere brindar soporte para obtener resultados exitosos para cualquier combinación. Esta tesis aborda este desafío identificando las características de diseño y fabricación a considerar e investigando las consideraciones mecánicas y de pos procesamiento. Se propone y evalúa un nuevo marco de diseño que permite a los nuevos usuarios aprovechar las capacidades y considerar las limitaciones. Esta investigación encuentra que es posible crear un conjunto de herramientas de diseño que permita a los usuarios no capacitados diseñar productos utilizando la complejidad habilitada por la tecnología al tiempo que garantiza la funcionalidad y la capacidad de fabricación del producto.[CA] En els últims anys, la fabricació additiva a través de l'extrusió de materials ha experimentat un desenvolupament i adopció accelerats gràcies a l'àmplia disponibilitat de màquines i materials de baix cost. La grandària d'aquestes màquines s'ha reduït de la grandària del taller a la grandària de l'escriptori, la qual cosa permet el seu ús en configuracions d'oficina o en a casa. Aquest canvi ha permés l'adopció de la tecnologia per la gamma més àmplia d'usuaris que mai, amb o sense experiència en disseny o enginyeria. Aquest nou paradigma ha creat el desafiament de com habilitar que aquests nous usuaris aprofiten les capacitats proporcionades per aquesta tecnologia. Aquesta tecnologia permet la creació de geometries complexes i productes personalitzats amb un cost inferior als processos de fabricació convencionals. A més, la gran quantitat d'usuaris disposats a compartir els seus dissenys permet trobar solucions de disseny des d'altres dissenyadors. No obstant això, l'àmplia gamma de configuracions de màquina, paràmetres i materials requereix brindar suport per a obtindre resultats reeixits per a qualsevol combinació. Aquesta tesi aborda aquest desafiament identificant les característiques de disseny i fabricació a considerar i investigant les consideracions mecàniques i de post processament. Es proposa i avalua un nou marc de disseny que permet als nous usuaris aprofitar les capacitats i considerar les limitacions. Aquesta investigació troba que és possible crear un conjunt d'eines de disseny que permeta als usuaris no capacitats dissenyar productes utilitzant la complexitat habilitada per la tecnologia al mateix temps que garanteix la funcionalitat i la capacitat de fabricació del producte.[EN] In recent years, additive manufacturing through material extrusion has experienced accelerated development and adoption thanks to the wide availability of low-cost machines and materials. The size of these machines has been reduced from shop floor to desktop size, enabling their usage in office setups or at home. This change has allowed the adoption of the technology by the broadest range of users than ever, with or without an engineering design background. This new paradigm has created the challenge of how to enable these novel users to leverage the capabilities provided by this technology. This technology allows the creation of complex geometry and customised products with a cost lower than conventional manufacturing processes. Furthermore, the large number of users willing to share their designs allows finding design solutions from other designers. However, the wide range of machine configurations, parameters and materials requires providing support to obtain successful results under any combination. This thesis addresses this challenge by identifying the design and manufacturing characteristics to be considered and investigating the mechanical and post-processing considerations. A new design framework that enables new users to leverage the capabilities and consider the limitations is proposed and evaluated. This research finds that it is possible to create a design toolkit that enables untrained users to design products using the complexity enabled by the technology whilst ensuring the product's functionality and manufacturability.Fernández Vicente, M. (2022). Analysis to Support Design for Additive Manufacturing with Desktop 3D Printing [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/185344TESI

3D FDM production and mechanical behavior of polymeric sandwich specimens embedding classical and honeycomb cores

Abstract Desktop 3D FDM (Fused Deposition Modelling) printers are usually employed for the production of nonstructural objects. In recent years, the present authors tried to use this technology also to produce structural elements employed in the construction of small UAVs (Unmanned Aerial Vehicles). Mechanical stresses are not excessive for small multirotor UAVs. Therefore, the FDM technique combined with polymers, such as the ABS (Acrylonitrile Butadiene Styrene) and the PLA(Poly Lactic Acid), can be successfully employed to produce structural components. The present new work is devoted to the production and preliminary structural analysis of sandwich configurations. These new lamination schemes could lead to an important weight reduction without significant decreases of mechanical properties. Therefore, it could be possible, for the designed application (e.g., a multifunctional small UAV produced via FDM), to have stiffener and lighter structures easy to be manufactured with a low-cost 3D printer. The new sandwich specimens here proposed are PLA sandwich specimens embedding a PLA honeycomb core produced by means of the same extruder, multilayered specimens with ABS external layers and an internal homogeneous PLA core using different extruders for the two materials, sandwich specimens with external ABS skins and an internal PLA honeycomb core using different extruders for the two materials, and sandwich specimens where two different extruders have been employed for PLA material used for skins and for the internal honeycomb core. For all the proposed configurations, a detailed description of the production activity is given.Moreover, several preliminary results about three-point bending tests, different mechanical behaviors and relative delamination problems for each sandwich configuration will be discussed in depth

Development of design criteria for novel 3D-printed quadric-surfaced sludge digesters for wastewater infrastructure

The quadric-surfaced sludge digester (QSD), also known as the egg-shaped sludge digester, has proven its advantages over traditional cylindrical digesters recently. A reduction in operational cost is the dominant factor. Its shell can be described as a revolution of a parabola with the apex and base being either tapered or spherical. This shape provides a surface free of discontinuities, which is advantageous regarding the efficiency during mixing. Since the shape does not produce areas of inactive fluid motion within the tank, sludge settlement and an eventual grit build-up are avoided. The stresses developed in the shell of the sludge digester, vary along the meridian and equatorial diameters. A non-dimensional parameter, ξ, defines the height-to-diameter aspect ratio which is used to delineate the parametric boundary conditions of the shell’s surface. Three groups of analyses were conducted to determine the orthogonal stresses in the shell of the QSD. The first-principles numerical models ran reasonably quickly, and many iterations were made during the study. The results showed that they were in within the range 5.34% to 7.2% to 2D FEA simulations. The 3D FEA simulations were within the range of 8.3% to 9.2% to the MATLAB time-history models. This is a good indicator that the first principles numerical models are an excellent time-saving method to predict the behaviour of the QSD under seismic excitation. Upon examining the criteria for the design, analysing the results for the 2D FEA simulations showed that the fill height is not a significant variable with sloshing however the 3D FEA showed that the hydrostatic pressure is a significant variable. With the maximum tensile stress of the 3D-printed ABS being 24.4 MPa, the overall maximum stress of 5.45 MPa, the material can be a viable option for the use of QSD construction in small island developing states (SIDS)