Magnetodielectric effect in nickel nanosheet-Na-4 mica composites

Nickel nanosheets of thickness 0.6 nm were grown within the nanochannels of Na-4 mica template. The specimens show magnetodielectric effect at room temperature with a change of dielectric constant as a function of magnetic field, the electric field frequency varying from 100 to 700 kHz. A decrease of 5% in the value of dielectric constant was observed up to a field of 1.2 Tesla. This is explained by an inhomogeneous two-component composite model as theoretically proposed recently. The present approach will open up synthesis of various nanocomposites for sensor applications.Comment: 11 pages, 7 figure

Synthesis of Al and Ag nanoparticles through ultra-sonic dissociation of thermal evaporation deposited thin films for promising clinical applications as polymer nanocomposite

Nanoparticles (NPs) having well-defined shape, size and clean surface serve as ideal model system to investigate surface/interfacial reactions. Ag and Al NPs are receiving great interest due to their wide applications in bio-medical field, aerospace and space technology as combustible additives in propellants and hydrogen generation. Hence, in this study, we have synthesized Ag and Al NPs using an innovative approach of ultra-sonic dissociation of thin films. Phase and particle size distributions of the Ag and Al NPs have been determined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Thin film dissociation/dissolution mechanism, hence conversion into NPs has been characterized by SEM- scanning electron microscope. EDXA & ICPMS have been performed for chemical analysis of NPs. Optical properties have been characterized by UV-Vis and PL spectroscopy. These NPs have also been investigated for their anti-bacterial activity against Escherichia coli bacteria. To the best of our knowledge, this is the first time when NPs has been synthesized by ultra-sonic dissociation of thin films. As an application, these NPs were used further for synthesis of nanocomposite polymer membranes, which show excellent activity against bio film formation

Nanomaterials for Healthcare Biosensing Applications

In recent years, an increasing number of nanomaterials have been explored for their applications in biomedical diagnostics, making their applications in healthcare biosensing a rapidly evolving field. Nanomaterials introduce versatility to the sensing platforms and may even allow mobility between different detection mechanisms. The prospect of a combination of different nanomaterials allows an exploitation of their synergistic additive and novel properties for sensor development. This paper covers more than 290 research works since 2015, elaborating the diverse roles played by various nanomaterials in the biosensing field. Hence, we provide a comprehensive review of the healthcare sensing applications of nanomaterials, covering carbon allotrope-based, inorganic, and organic nanomaterials. These sensing systems are able to detect a wide variety of clinically relevant molecules, like nucleic acids, viruses, bacteria, cancer antigens, pharmaceuticals and narcotic drugs, toxins, contaminants, as well as entire cells in various sensing media, ranging from buffers to more complex environments such as urine, blood or sputum. Thus, the latest advancements reviewed in this paper hold tremendous potential for the application of nanomaterials in the early screening of diseases and point-of-care testing

Multifunctional Magnetoelectric Materials for Device Applications

Mutiferroics are a novel class of next generation multifunctional materials, which display simultaneous magnetic spin, electric dipole, and ferroelastic ordering, and have drawn increasing interest due to their multi-functionality for a variety of device applications. Since single-phase materials exist rarely in nature with such cross-coupling properties, an intensive research activity is being pursued towards the discovery of new single-phase multiferroic materials and the design of new engineered materials with strong magneto-electric (ME) coupling. This review article summarizes the development of different kinds of multiferroic material: single-phase and composite ceramic, laminated composite, and nanostructured thin films. Thin-film nanostructures have higher magnitude direct ME coupling values and clear evidence of indirect ME coupling compared with bulk materials. Promising ME coupling coefficients have been reported in laminated composite materials in which signal to noise ratio is good for device fabrication. We describe the possible applications of these materials

Synthesis of Mesoporous Silica@Co–Al Layered Double Hydroxide Spheres: Layer-by-Layer Method and Their Effects on the Flame Retardancy of Epoxy Resins

Hierarchical mesoporous silica@Co–Al layered double hydroxide (m-SiO2@Co–Al LDH) spheres were prepared through a layer-by-layer assembly process, in order to integrate their excellent physical and chemical functionalities. TEM results depicted that, due to the electrostatic potential difference between m-SiO2 and Co–Al LDH, the synthetic m-SiO2@Co–Al LDH hybrids exhibited that m-SiO2 spheres were packaged by the Co–Al LDH nanosheets. Subsequently, the m-SiO2@Co–Al LDH spheres were incorporated into epoxy resin (EP) to prepare specimens for investigation of their flame-retardant performance. Cone results indicated that m-SiO2@Co–Al LDH incorporated obviously improved fire retardant of EP. A plausible mechanism of fire retardant was hypothesized based on the analyses of thermal conductivity, char residues, and pyrolysis fragments. Labyrinth effect of m-SiO2 and formation of graphitized carbon char catalyzed by Co–Al LDH play pivotal roles in the flame retardance enhancement

DLI-CVD of TiO2–Cu antibacterial thin films: Growth and characterization

TiO2–Cu nanocomposite films were grown by pulsed direct liquid injection chemical vapor deposition (DLICVD) on stainless steel, silicon and glass substrates with the goal to produce bactericidal surfaces. Copper bis (2,2,6,6-tetramethyl-3,5-heptadionate), Cu(TMHD)2, and titanium tetra-iso-propoxide, TTIP, were used as metalorganic precursors. Liquid solutions of these compounds in xylene were injected in a flash vaporization chamber connected to a cold wall MOCVD reactor. The deposition temperature was typically 683 K and the total pressure was 800 Pa. The copper content of the layers was controlled by the mole fraction of Cu (TMHD)2 which was adjusted by the injection parameters (injection frequency and concentration of the starting solution). The chemical, structural and physical characteristics of the films were investigated by XRD, XPS, FEG-SEM and TEM. Copper is incorporated as metal particles with a relatively large size distribution ranging from 20 to 400 nm (with a large majority in 20–100 nm) depending on the copper content of the films. The influence of the growth conditions on the structural features and the antibacterial properties of the thin films are reported and discussed