New Preamble Design for Reduced-Complexity Timing Acquisition in UWB Systems

Abstract-Low-complexity rapid timing acquisition is one of the most pivotal challenges in ultra-wideband (UWB) wireless technology whose short duration pulse results in high resolution in time. In this paper, we propose a new preamble which can reduce the performance degradation caused by diminishing the operational complexity of the coarse timing acquisition. In the reduced-complexity acquisition algorithm, the received preamble is shortened by summing its elements group-by-group and correlated with the known PN sequence having reduced length to find the maximum output value of the correlators. This acquisition algorithm introduces performance deterioration since it loses the impulsive autocorrelation property of the PN sequence after summation. Therefore, we judiciously design a new preamble sequence whose slide correlator output function shows a distinct peak at zero delay and the symmetry even after summation. Simulation results demonstrate that the reducedcomplexity acquisition algorithm exploiting the proposed preamble outperforms the algorithm using the PN sequence as the preamble, while the amount of computational reduction remains the same

Initial synchronisation of wideband and UWB direct sequence systems: single- and multiple-antenna aided solutions

This survey guides the reader through the open literature on the principle of initial synchronisation in single-antenna-assisted single- and multi-carrier Code Division Multiple Access (CDMA) as well as Direct Sequence-Ultra WideBand (DS-UWB) systems, with special emphasis on the DownLink (DL). There is a paucity of up-to-date surveys and review articles on initial synchronization solutions for MIMO-aided and cooperative systems - even though there is a plethora of papers on both MIMOs and on cooperative systems, which assume perfect synchronization. Hence this paper aims to ?ll the related gap in the literature

A VHDL-AMS Simulation Environment for an UWB Impulse Radio Transceiver

Ultra-Wide-Band (UWB) communication based on the impulse radio paradigm is becoming increasingly popular. According to the IEEE 802.15 WPAN Low Rate Alternative PHY Task Group 4a, UWB will play a major role in localization applications, due to the high time resolution of UWB signals which allow accurate indirect measurements of distance between transceivers. Key for the successful implementation of UWB transceivers is the level of integration that will be reached, for which a simulation environment that helps take appropriate design decisions is crucial. Owing to this motivation, in this paper we propose a multiresolution UWB simulation environment based on the VHDL-AMS hardware description language, along with a proper methodology which helps tackle the complexity of designing a mixed-signal UWB System-on-Chip. We applied the methodology and used the simulation environment for the specification and design of an UWB transceiver based on the energy detection principle. As a by-product, simulation results show the effectiveness of UWB in the so-called ranging application, that is the accurate evaluation of the distance between a couple of transceivers using the two-way-ranging metho

A low-cost time-hopping impulse radio system for high data rate transmission

We present an efficient, low-cost implementation of time-hopping impulse radio that fulfills the spectral mask mandated by the FCC and is suitable for high-data-rate, short-range communications. Key features are: (i) all-baseband implementation that obviates the need for passband components, (ii) symbol-rate (not chip rate) sampling, A/D conversion, and digital signal processing, (iii) fast acquisition due to novel search algorithms, (iv) spectral shaping that can be adapted to accommodate different spectrum regulations and interference environments. Computer simulations show that this system can provide 110Mbit/s at 7-10m distance, as well as higher data rates at shorter distances under FCC emissions limits. Due to the spreading concept of time-hopping impulse radio, the system can sustain multiple simultaneous users, and can suppress narrowband interference effectively.Comment: To appear in EURASIP Journal on Applied Signal Processing (Special Issue on UWB - State of the Art

Energy Detection UWB Receiver Design using a Multi-resolution VHDL-AMS Description

Ultra Wide Band (UWB) impulse radio systems are appealing for location-aware applications. There is a growing interest in the design of UWB transceivers with reduced complexity and power consumption. Non-coherent approaches for the design of the receiver based on energy detection schemes seem suitable to this aim and have been adopted in the project the preliminary results of which are reported in this paper. The objective is the design of a UWB receiver with a top-down methodology, starting from Matlab-like models and refining the description down to the final transistor level. This goal will be achieved with an integrated use of VHDL for the digital blocks and VHDL-AMS for the mixed-signal and analog circuits. Coherent results are obtained using VHDL-AMS and Matlab. However, the CPU time cost strongly depends on the description used in the VHDL-AMS models. In order to show the functionality of the UWB architecture, the receiver most critical functions are simulated showing results in good agreement with the expectations

Synchronization for Impulse-Radio UWB With Energy-Detection and Multi-User Interference: Algorithms and Application to IEEE 802.15.4a

Energy-detection (ED) receivers can take advantage of the ranging and multipath resistance capabilities of impulse-radio ultra-wideband (IR-UWB) physical layers at a much lower complexity than coherent receivers. However, ED receivers are extremely vulnerable to multi-user interference (MUI). Therefore, the design of IR-UWB ED architectures must take MUI into account. In this paper, we present the design and evaluation of two complementary algorithms for reliable and robust synchronization of IR-UWB ED receivers in the presence of MUI: 1) power-independent detection and preamble code interference cancellation (PICNIC) and 2) detection of start-frame-delimiter through sequential ratio tests (DESSERT). PICNIC addresses packet detection and timing acquisition while DESSERT focuses on start-frame-delimiter (SFD) detection. Both algorithms are evaluated with the IEEE 802.15.4a IR-UWB physical layer, standardized for low data-rate networks. The performance evaluation with extensive simulations show that our algorithms outperform nonrobust synchronization algorithms by up to two orders of magnitude in the presence of MUI