88 research outputs found
Scheduling of Multicast and Unicast Services under Limited Feedback by using Rateless Codes
Many opportunistic scheduling techniques are impractical because they require
accurate channel state information (CSI) at the transmitter. In this paper, we
investigate the scheduling of unicast and multicast services in a downlink
network with a very limited amount of feedback information. Specifically,
unicast users send imperfect (or no) CSI and infrequent acknowledgements (ACKs)
to a base station, and multicast users only report infrequent ACKs to avoid
feedback implosion. We consider the use of physical-layer rateless codes, which
not only combats channel uncertainty, but also reduces the overhead of ACK
feedback. A joint scheduling and power allocation scheme is developed to
realize multiuser diversity gain for unicast service and multicast gain for
multicast service. We prove that our scheme achieves a near-optimal throughput
region. Our simulation results show that our scheme significantly improves the
network throughput over schemes employing fixed-rate codes or using only
unicast communications
AirSync: Enabling Distributed Multiuser MIMO with Full Spatial Multiplexing
The enormous success of advanced wireless devices is pushing the demand for
higher wireless data rates. Denser spectrum reuse through the deployment of
more access points per square mile has the potential to successfully meet the
increasing demand for more bandwidth. In theory, the best approach to density
increase is via distributed multiuser MIMO, where several access points are
connected to a central server and operate as a large distributed multi-antenna
access point, ensuring that all transmitted signal power serves the purpose of
data transmission, rather than creating "interference." In practice, while
enterprise networks offer a natural setup in which distributed MIMO might be
possible, there are serious implementation difficulties, the primary one being
the need to eliminate phase and timing offsets between the jointly coordinated
access points.
In this paper we propose AirSync, a novel scheme which provides not only time
but also phase synchronization, thus enabling distributed MIMO with full
spatial multiplexing gains. AirSync locks the phase of all access points using
a common reference broadcasted over the air in conjunction with a Kalman filter
which closely tracks the phase drift. We have implemented AirSync as a digital
circuit in the FPGA of the WARP radio platform. Our experimental testbed,
comprised of two access points and two clients, shows that AirSync is able to
achieve phase synchronization within a few degrees, and allows the system to
nearly achieve the theoretical optimal multiplexing gain. We also discuss MAC
and higher layer aspects of a practical deployment. To the best of our
knowledge, AirSync offers the first ever realization of the full multiuser MIMO
gain, namely the ability to increase the number of wireless clients linearly
with the number of jointly coordinated access points, without reducing the per
client rate.Comment: Submitted to Transactions on Networkin
Millimetre wave frequency band as a candidate spectrum for 5G network architecture : a survey
In order to meet the huge growth in global mobile data traffic in 2020 and beyond, the development of the 5th Generation (5G) system is required as the current 4G system is expected to fall short of the provision needed for such growth. 5G is anticipated to use a higher carrier frequency in the millimetre wave (mm-wave) band, within the 20 to 90 GHz, due to the availability of a vast amount of unexploited bandwidth. It is a revolutionary step to use these bands because of their different propagation characteristics, severe atmospheric attenuation, and hardware constraints. In this paper, we carry out a survey of 5G research contributions and proposed design architectures based on mm-wave communications. We present and discuss the use of mm-wave as indoor and outdoor mobile access, as a wireless backhaul solution, and as a key enabler for higher order sectorisation. Wireless standards such as IEE802.11ad, which are operating in mm-wave band have been presented. These standards have been designed for short range, ultra high data throughput systems in the 60 GHz band. Furthermore, this survey provides new insights regarding relevant and open issues in adopting mm-wave for 5G networks. This includes increased handoff rate and interference in Ultra-Dense Network (UDN), waveform consideration with higher spectral efficiency, and supporting spatial multiplexing in mm-wave line of sight. This survey also introduces a distributed base station architecture in mm-wave as an approach to address increased handoff rate in UDN, and to provide an alternative way for network densification in a time and cost effective manner
Probabilistic Rateless Multiple Access for Machine-to-Machine Communication
Future machine to machine (M2M) communications need to support a massive
number of devices communicating with each other with little or no human
intervention. Random access techniques were originally proposed to enable M2M
multiple access, but suffer from severe congestion and access delay in an M2M
system with a large number of devices. In this paper, we propose a novel
multiple access scheme for M2M communications based on the capacity-approaching
analog fountain code to efficiently minimize the access delay and satisfy the
delay requirement for each device. This is achieved by allowing M2M devices to
transmit at the same time on the same channel in an optimal probabilistic
manner based on their individual delay requirements. Simulation results show
that the proposed scheme achieves a near optimal rate performance and at the
same time guarantees the delay requirements of the devices. We further propose
a simple random access strategy and characterized the required overhead.
Simulation results show the proposed approach significantly outperforms the
existing random access schemes currently used in long term evolution advanced
(LTE-A) standard in terms of the access delay.Comment: Accepted to Publish in IEEE Transactions on Wireless Communication
Short Block-length Codes for Ultra-Reliable Low-Latency Communications
This paper reviews the state of the art channel coding techniques for
ultra-reliable low latency communication (URLLC). The stringent requirements of
URLLC services, such as ultra-high reliability and low latency, have made it
the most challenging feature of the fifth generation (5G) mobile systems. The
problem is even more challenging for the services beyond the 5G promise, such
as tele-surgery and factory automation, which require latencies less than 1ms
and failure rate as low as . The very low latency requirements of
URLLC do not allow traditional approaches such as re-transmission to be used to
increase the reliability. On the other hand, to guarantee the delay
requirements, the block length needs to be small, so conventional channel
codes, originally designed and optimised for moderate-to-long block-lengths,
show notable deficiencies for short blocks. This paper provides an overview on
channel coding techniques for short block lengths and compares them in terms of
performance and complexity. Several important research directions are
identified and discussed in more detail with several possible solutions.Comment: Accepted for publication in IEEE Communications Magazin
- …