1,588 research outputs found
Feedback-Aware Precoding for Millimeter Wave Massive MIMO Systems
Millimeter wave (mmWave) communication is a promising solution for coping
with the ever-increasing mobile data traffic because of its large bandwidth. To
enable a sufficient link margin, a large antenna array employing directional
beamforming, which is enabled by the availability of channel state information
at the transmitter (CSIT), is required. However, CSIT acquisition for mmWave
channels introduces a huge feedback overhead due to the typically large number
of transmit and receive antennas. Leveraging properties of mmWave channels,
this paper proposes a precoding strategy which enables a flexible adjustment of
the feedback overhead. In particular, the optimal unconstrained precoder is
approximated by selecting a variable number of elements from a basis that is
constructed as a function of the transmitter array response, where the number
of selected basis elements can be chosen according to the feedback constraint.
Simulation results show that the proposed precoding scheme can provide a
near-optimal solution if a higher feedback overhead can be afforded. For a low
overhead, it can still provide a good approximation of the optimal precoder.Comment: 7 pages, 5 figures, to appear at the IEEE International Symposium on
Personal, Indoor and Mobile Radio Communications (PIMRC) 201
Hybrid Transceiver Optimization for Multi-Hop Communications
Multi-hop communication with the aid of large-scale antenna arrays will play
a vital role in future emergence communication systems. In this paper, we
investigate amplify-and-forward based and multiple-input multiple-output
assisted multi-hop communication, in which all nodes employ hybrid
transceivers. Moreover, channel errors are taken into account in our hybrid
transceiver design. Based on the matrix-monotonic optimization framework, the
optimal structures of the robust hybrid transceivers are derived. By utilizing
these optimal structures, the optimizations of analog transceivers and digital
transceivers can be separated without loss of optimality. This fact greatly
simplifies the joint optimization of analog and digital transceivers. Since the
optimization of analog transceivers under unit-modulus constraints is
non-convex, a projection type algorithm is proposed for analog transceiver
optimization to overcome this difficulty. Based on the derived analog
transceivers, the optimal digital transceivers can then be derived using
matrix-monotonic optimization. Numeral results obtained demonstrate the
performance advantages of the proposed hybrid transceiver designs over other
existing solutions.Comment: 32 pages, 6 figures. This manuscript has been submitted to IEEE
Journal on Selected Areas in Communications (special issue on Multiple
Antenna Technologies for Beyond 5G
Hybrid Beamforming via the Kronecker Decomposition for the Millimeter-Wave Massive MIMO Systems
Despite its promising performance gain, the realization of mmWave massive
MIMO still faces several practical challenges. In particular, implementing
massive MIMO in the digital domain requires hundreds of RF chains matching the
number of antennas. Furthermore, designing these components to operate at the
mmWave frequencies is challenging and costly. These motivated the recent
development of hybrid-beamforming where MIMO processing is divided for separate
implementation in the analog and digital domains, called the analog and digital
beamforming, respectively. Analog beamforming using a phase array introduces
uni-modulus constraints on the beamforming coefficients, rendering the
conventional MIMO techniques unsuitable and call for new designs. In this
paper, we present a systematic design framework for hybrid beamforming for
multi-cell multiuser massive MIMO systems over mmWave channels characterized by
sparse propagation paths. The framework relies on the decomposition of analog
beamforming vectors and path observation vectors into Kronecker products of
factors being uni-modulus vectors. Exploiting properties of Kronecker mixed
products, different factors of the analog beamformer are designed for either
nulling interference paths or coherently combining data paths. Furthermore, a
channel estimation scheme is designed for enabling the proposed hybrid
beamforming. The scheme estimates the AoA of data and interference paths by
analog beam scanning and data-path gains by analog beam steering. The
performance of the channel estimation scheme is analyzed. In particular, the
AoA spectrum resulting from beam scanning, which displays the magnitude
distribution of paths over the AoA range, is derived in closed-form. It is
shown that the inter-cell interference level diminishes inversely with the
array size, the square root of pilot sequence length and the spatial separation
between paths.Comment: Submitted to IEEE JSAC Special Issue on Millimeter Wave
Communications for Future Mobile Networks, minor revisio
- …