3,897 research outputs found
Laser induced magnetization switching in films with perpendicular anisotropy: a comparison between measurements and a multi-macrospin model
Thermally-assisted ultra-fast magnetization reversal in a DC magnetic field
for magnetic multilayer thin films with perpendicular anisotropy has been
investigated in the time domain using femtosecond laser heating. The experiment
is set-up as an optically pumped stroboscopic Time Resolved Magneto-Optical
Kerr Effect magnetometer. It is observed that a modest laser fluence of about
0.3 mJ/square-cm induces switching of the magnetization in an applied field
much less than the DC coercivity (0.8 T) on the sub-nanosecond time-scale. This
switching was thermally-assisted by the energy from the femtosecond pump-pulse.
The experimental results are compared with a model based on the Landau
Lifschitz Bloch equation. The comparison supports a description of the reversal
process as an ultra-fast demagnetization and partial recovery followed by
slower thermally activated switching due to the spin system remaining at an
elevated temperature after the heating pulse.Comment: 8 pages, 10 figures, to be submitted to PR
Layer-resolved imaging of domain wall interactions in magnetic tunnel junction-like trilayers
We have performed a layer-resolved, microscopic study of interactions between
domain walls in two magnetic layers separated by a non-magnetic one, using
high-resolution x-ray photoemission electron microscopy. Domain walls in the
hard magnetic Co layer of a Co/Al2O3/FeNi trilayer with in-plane uniaxial
anisotropy strongly modify the local magnetization direction in the soft
magnetic FeNi layer. The stray fields associated to the domain walls lead to an
antiparallel coupling between the local Co and FeNi moments. For domain walls
parallel to the easy magnetization axis this interaction is limited to the
domain wall region itself. For strongly charged (head-on or tail-to-tail)
walls, the antiparallel coupling dominates the interaction over radial
distances up to several micrometers from the centre of the domain wall.Comment: Published version, J. Phys.: Condens. Matter 19, 476204 (2007
Sub-nanosecond signal propagation in anisotropy engineered nanomagnetic logic chains
Energy efficient nanomagnetic logic (NML) computing architectures propagate
and process binary information by relying on dipolar field coupling to reorient
closely-spaced nanoscale magnets. Signal propagation in nanomagnet chains of
various sizes, shapes, and magnetic orientations has been previously
characterized by static magnetic imaging experiments with low-speed adiabatic
operation; however the mechanisms which determine the final state and their
reproducibility over millions of cycles in high-speed operation (sub-ns time
scale) have yet to be experimentally investigated. Monitoring NML operation at
its ultimate intrinsic speed reveals features undetectable by conventional
static imaging including individual nanomagnetic switching events and
systematic error nucleation during signal propagation. Here, we present a new
study of NML operation in a high speed regime at fast repetition rates. We
perform direct imaging of digital signal propagation in permalloy nanomagnet
chains with varying degrees of shape-engineered biaxial anisotropy using
full-field magnetic soft x-ray transmission microscopy after applying single
nanosecond magnetic field pulses. Further, we use time-resolved magnetic
photo-emission electron microscopy to evaluate the sub-nanosecond dipolar
coupling signal propagation dynamics in optimized chains with 100 ps time
resolution as they are cycled with nanosecond field pulses at a rate of 3 MHz.
An intrinsic switching time of 100 ps per magnet is observed. These
experiments, and accompanying macro-spin and micromagnetic simulations, reveal
the underlying physics of NML architectures repetitively operated on nanosecond
timescales and identify relevant engineering parameters to optimize performance
and reliability.Comment: Main article (22 pages, 4 figures), Supplementary info (11 pages, 5
sections
Influence of topography and Co domain walls on the magnetization reversal of the FeNi layer in FeNi/AlO/Co magnetic tunnel junctions
We have studied the magnetization reversal dynamics of FeNi/AlO/Co
magnetic tunnel junctions deposited on step-bunched Si substrates using
magneto-optical Kerr effect and time-resolved x-ray photoelectron emission
microscopy combined with x-ray magnetic circular dichroism (XMCD-PEEM).
Different reversal mechanisms have been found depending on the substrate miscut
angle. Larger terraces (smaller miscut angles) lead to a higher nucleation
density and stronger domain wall pinning. The width of domain walls with
respect to the size of the terraces seems to play an important role in the
reversal. We used the element selectivity of XMCD-PEEM to reveal the strong
influence of the stray field of domain walls in the hard magnetic layer on the
magnetic switching of the soft magnetic layer.Comment: 8 Pages, 7 Figure
Interplay between magnetic anisotropy and interlayer coupling in nanosecond magnetization reversal of spin-valve trilayers
The influence of magnetic anisotropy on nanosecond magnetization reversal in
coupled FeNi/Cu/Co trilayers was studied using a photoelectron emission
microscope combined with x-ray magnetic circular dicroism. In quasi-isotropic
samples the reversal of the soft FeNi layer is determined by domain wall
pinning that leads to the formation of small and irregular domains. In samples
with uniaxial magnetic anisotropy, the domains are larger and the influence of
local interlayer coupling dominates the domain structure and the reversal of
the FeNi layer
4D Lorentz Electron Microscopy Imaging: Magnetic Domain Wall Nucleation, Reversal, and Wave Velocity
Magnetization reversal is an important topic of research in the fields of both basic and applied ferromagnetism. For the study of magnetization reversal dynamics and magnetic domain wall (DW) motion in ferromagnetic thin films, imaging techniques are indispensable. Here, we report 4D imaging of DWs by the out-of-focus Fresnel method in Lorentz ultrafast electron microscopy (UEM), with in situ spatial and temporal resolutions. The temporal change in magnetization, as revealed by changes in image contrast, is clocked using an impulsive optical field to produce structural deformation of the specimen, thus modulating magnetic field components in the specimen plane. Directly visualized are DW nucleation and subsequent annihilation and oscillatory reappearance (periods of 32 and 45 ns) in nickel films on two different substrates. For the case of Ni films on a Ti/Si_(3)N_4 substrate, under conditions of minimum residual external magnetic field, the oscillation is associated with a unique traveling wave train of periodic magnetization reversal. The velocity of DW propagation in this wave train is measured to be 172 m/s with a wavelength of 7.8 μm. The success of this study demonstrates the promise of Lorentz UEM for real-space imaging of spin switching, ferromagnetic resonance, and laser-induced demagnetization in ferromagnetic nanostructures
Tunable magnetization damping in transition metal ternary alloys
We show that magnetization damping in Permalloy, Ni80Fe20 (``Py''), can be
enhanced sufficiently to reduce post-switching magnetization precession to an
acceptable level by alloying with the transition metal osmium (Os). The damping
increases monotonically upon raising the Os-concentration in Py, at least up to
9% of Os. Other effects of alloying with Os are suppression of magnetization
and enhancement of in-plane anisotropy. Magnetization damping also increases
significantly upon alloying with the five other transition metals included in
this study (4d-elements: Nb, Ru, Rh; 5d-elements: Ta, Pt) but never as strongly
as with Os.Comment: 4 pages, submitted to Appl. Phys. Let
- …