Nanotoxicity for E. Coli and Characterization of Silver Quantum Dots Produced by Biosynthesis with Eichhornia crassipes

Nanomaterials are widely used in health and biomedical applications, however, only a few studies investigate their toxic effects. The present report signifies a contribution to the study of the toxic effects of silver nanoparticles on E. coli cells, which is a model organism of anthropogenic pollution. The toxicity of nanoparticles depends on their chemical and surface properties, shape and size. Nanoparticles that have the same chemical composition but different shapes or sizes might have different effects on cells. In this work, Ag nanoparticles were biosynthesized with an Eichhornia crassipes biomass, and it was demonstrated for the first time, that the amounts of hydrolysable tannins in this plant, are directly related to the size, shape, structure and composition of the Ag nanoparticles ; furthermore, the toxic effect was studied using E. coli cell culture. The EC was divided in three sections, i.e. roots, stems and leaves. Particle aggregation seems to be influenced by the amount of tannins present in the biomass. For each plant part, the amounts of hydrolysable tannins were determined, the highest amounts of these chemicals were present in the leaves, and hence these Ag nanoparticles dissolutions were used for the nanotoxicity experiments. . The cytotoxicity of Ag nanoparticles in a suspension was tested using the Ag nanoparticles synthesized with leaves, against Escherichia Coli ATCC 25992 where the concentration that inhibited 100% of bacterial growth, was 5 mg/L in contrast with a commercial solution which needed 10mg/L of Ag. For the most part, the Ag nanoparticles seemed to be of a nearly spherical shape, although on closer examination were determined to be mainly polyhedral. Leaves biomass, produced mainly quantum dot nanoparticles with sizes below 10 nm and the Ag nanoparticles were mostly AgO. The cytotoxicity of Ag NPs in a suspension tested using the Ag nanoparticles on E. coli was highly effective towards inhibition of bacterial growth

Quantum Manifestation of Elastic Constants in Nanostructures

Generally, there are two distinct effects in modifying the properties of low-dimensional nanostructures: surface effect (SS) due to increased surface-volume ratio and quantum size effect (QSE) due to quantum confinement in reduced dimension. The SS has been widely shown to affect the elastic constants and mechanical properties of nanostructures. Here, using Pb nanofilm and graphene nanoribbon as model systems, we demonstrate the QSE on the elastic constants of nanostructures by first-principles calculations. We show that generally QSE is dominant in affecting the elastic constants of metallic nanostructures while SS is more pronounced in semiconductor and insulator nanostructures. Our findings have broad implications in quantum aspects of nanomechanics

Realization of aligned three-dimensional single-crystal chromium nanostructures by thermal evaporation

Aligned three-dimensional single-crystal chromium nanostructures are fabricated onto a silicon substrate by thermal evaporation in a conventional thermal evaporator, where the incident angle of Cr vapor flux with respect to the substrate surface normal is fixed at 88°. The effects of the deposition time and incident angle on the morphology of the resulting nanostructures are investigated. The achieved Cr nanostructures are characterized by scanning electron microscopy, energy dispersive X-ray analysis, X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, and surface area measurement. This study provides a convenient way to fabricate three-dimensional single-crystal Cr nanostructures, which is suitable for batch fabrication and mass production. Finally, the same technique is employed to fabricate the nanostructures of other metals such as Ag, Au, Pd, and Ni

Fabrication of three-dimensional suspended, interlayered and hierarchical nanostructures by accuracy-improved electron beam lithography overlay

Nanofabrication techniques are essential for exploring nanoscience and many closely related research fields such as materials, electronics, optics and photonics. Recently, three-dimensional (3D) nanofabrication techniques have been actively investigated through many different ways, however, it is still challenging to make elaborate and complex 3D nanostructures that many researchers want to realize for further interesting physics studies and device applications. Electron beam lithography, one of the two-dimensional (2D) nanofabrication techniques, is also feasible to realize elaborate 3D nanostructures by stacking each 2D nanostructures. However, alignment errors among the individual 2D nanostructures have been difficult to control due to some practical issues. In this work, we introduce a straightforward approach to drastically increase the overlay accuracy of sub-20 nm based on carefully designed alignmarks and calibrators. Three different types of 3D nanostructures whose designs are motivated from metamaterials and plasmonic structures have been demonstrated to verify the feasibility of the method, and the desired result has been achieved. We believe our work can provide a useful approach for building more advanced and complex 3D nanostructures.114sciescopu

Interaction of NH3_3 gas on α\alpha-MoO3_3 nanostructures −- a DFT investigation

The structural stability, electronic properties and NH$_3$ adsorption properties of pristine, Ti, Zr and F substituted $\alpha$-MoO$_3$ nanostructures are successfully studied using density functional theory with B3LYP/LanL2DZ basis set. The structural stability of $\alpha$-MoO$_3$ nanostructures is discussed in terms of formation energy. The electronic properties of pristine, Ti, Zr and F incorporated $\alpha$-MoO$_3$ nanostructures are discussed in terms of HOMO-LUMO gap, ionization potential and electron affinity. $\alpha$-MoO$_3$ nanostructures can be fine-tuned with suitable substitution impurity to improve the adsorption characteristics of ammonia, which can be used to detect NH$_3$ in a mixed environment. The present work gives an insight into tailoring $\alpha$-MoO$_3$ nanostructures for NH$_3$ detection.Comment: 16 pages, 20 figures, 2 table

Fast synthesis of platinum nanopetals and nanospheres for highly-sensitive non-enzymatic detection of glucose and selective sensing of ions

Novel methods to obtain Pt nanostructured electrodes have raised particular interest due to their high performance in electrochemistry. Several nanostructuration methods proposed in the literature use costly and bulky equipment or are time-consuming due to the numerous steps they involve. Here, Pt nanostructures were produced for the first time by one-step template-free electrodeposition on Pt bare electrodes. The change in size and shape of the nanostructures is proven to be dependent on the deposition parameters and on the ratio between sulphuric acid and chloride-complexes (i.e., hexachloroplatinate or tetrachloroplatinate). To further improve the electrochemical properties of electrodes, depositions of Pt nanostructures on previously synthesised Pt nanostructures are also performed. The electroactive surface areas exhibit a two order of magnitude improvement when Pt nanostructures with the smallest size are used. All the biosensors based on Pt nanostructures and immobilised glucose oxidase display higher sensitivity as compared to bare Pt electrodes. Pt nanostructures retained an excellent electrocatalytic activity towards the direct oxidation of glucose. Finally, the nanodeposits were proven to be an excellent solid contact for ion measurements, significantly improving the time-stability of the potential. The use of these new nanostructured coatings in electrochemical sensors opens new perspectives for multipanel monitoring of human metabolism

Evidence of diffusive fractal aggregation of TiO2 nanoparticles by femtosecond laser ablation at ambient conditions

The specific mechanisms which leads to the formation of fractal nanostructures by pulsed laser deposition remain elusive despite intense research efforts, motivated mainly by the technological interest in obtaining tailored nanostructures with simple and scalable production methods. Here we focus on fractal nanostructures of titanium dioxide, $TiO_2$, a strategic material for many applications, obtained by femtosecond laser ablation at ambient conditions. We model the fractal formation through extensive Monte Carlo simulations based on a set of minimal assumptions: irreversible sticking and size independent diffusion. Our model is able to reproduce the fractal dimensions and the area distributions of the nanostructures obtained in the experiments for different densities of the ablated material. The comparison of theory and experiment show that such fractal aggregates are formed after landing of the ablated material on the substrate surface by a diffusive mechanism. Finally we discuss the role of the thermal conductivity of the substrate and the laser fluence on the properties of the fractal nanostructures. Our results represent an advancement towards controlling the production of fractal nanostructures by pulsed laser deposition.Comment: 21 page

Surface optical Raman modes in InN nanostructures

Raman spectroscopic investigations are carried out on one-dimensional nanostructures of InN,such as nanowires and nanobelts synthesized by chemical vapor deposition. In addition to the optical phonons allowed by symmetry; A1, E1 and E2(high) modes, two additional Raman peaks are observed around 528 cm-1 and 560 cm-1 for these nanostructures. Calculations for the frequencies of surface optical (SO) phonon modes in InN nanostructures yield values close to those of the new Raman modes. A possible reason for large intensities for SO modes in these nanostructures is also discussed.Comment: 13 pages, 4 figures, Submitted in Journa