High Capacity CDMA and Collaborative Techniques

The thesis investigates new approaches to increase the user capacity and improve the error performance of Code Division Multiple Access (CDMA) by employing adaptive interference cancellation and collaborative spreading and space diversity techniques. Collaborative Coding Multiple Access (CCMA) is also investigated as a separate technique and combined with CDMA. The advantages and shortcomings of CDMA and CCMA are analysed and new techniques for both the uplink and downlink are proposed and evaluated. Multiple access interference (MAI) problem in the uplink of CDMA is investigated first. The practical issues of multiuser detection (MUD) techniques are reviewed and a novel blind adaptive approach to interference cancellation (IC) is proposed. It exploits the constant modulus (CM) property of digital signals to blindly suppress interference during the despreading process and obtain amplitude estimation with minimum mean squared error for use in cancellation stages. Two new blind adaptive receiver designs employing successive and parallel interference cancellation architectures using the CM algorithm (CMA) referred to as ‘CMA-SIC’ and ‘BA-PIC’, respectively, are presented. These techniques have shown to offer near single user performance for large number of users. It is shown to increase the user capacity by approximately two fold compared with conventional IC receivers. The spectral efficiency analysis of the techniques based on output signal-to interference-and-noise ratio (SINR) also shows significant gain in data rate. Furthermore, an effective and low complexity blind adaptive subcarrier combining (BASC) technique using a simple gradient descent based algorithm is proposed for Multicarrier-CDMA. It suppresses MAI without any knowledge of channel amplitudes and allows large number of users compared with equal gain and maximum ratio combining techniques normally used in practice. New user collaborative schemes are proposed and analysed theoretically and by simulations in different channel conditions to achieve spatial diversity for uplink of CCMA and CDMA. First, a simple transmitter diversity and its equivalent user collaborative diversity techniques for CCMA are designed and analysed. Next, a new user collaborative scheme with successive interference cancellation for uplink of CDMA referred to as collaborative SIC (C-SIC) is investigated to reduce MAI and achieve improved diversity. To further improve the performance of C-SIC under high system loading conditions, Collaborative Blind Adaptive SIC (C-BASIC) scheme is proposed. It is shown to minimize the residual MAI, leading to improved user capacity and a more robust system. It is known that collaborative diversity schemes incur loss in throughput due to the need of orthogonal time/frequency slots for relaying source’s data. To address this problem, finally a novel near-unity-rate scheme also referred to as bandwidth efficient collaborative diversity (BECD) is proposed and evaluated for CDMA. Under this scheme, pairs of users share a single spreading sequence to exchange and forward their data employing a simple superposition or space-time encoding methods. At the receiver collaborative joint detection is performed to separate each paired users’ data. It is shown that the scheme can achieve full diversity gain at no extra bandwidth as inter-user channel SNR becomes high. A novel approach of ‘User Collaboration’ is introduced to increase the user capacity of CDMA for both the downlink and uplink. First, collaborative group spreading technique for the downlink of overloaded CDMA system is introduced. It allows the sharing of the same single spreading sequence for more than one user belonging to the same group. This technique is referred to as Collaborative Spreading CDMA downlink (CS-CDMA-DL). In this technique T-user collaborative coding is used for each group to form a composite codeword signal of the users and then a single orthogonal sequence is used for the group. At each user’s receiver, decoding of composite codeword is carried out to extract the user’s own information while maintaining a high SINR performance. To improve the bit error performance of CS-CDMA-DL in Rayleigh fading conditions, Collaborative Space-time Spreading (C-STS) technique is proposed by combining the collaborative coding multiple access and space-time coding principles. A new scheme for uplink of CDMA using the ‘User Collaboration’ approach, referred to as CS-CDMA-UL is presented next. When users’ channels are independent (uncorrelated), significantly higher user capacity can be achieved by grouping multiple users to share the same spreading sequence and performing MUD on per group basis followed by a low complexity ML decoding at the receiver. This approach has shown to support much higher number of users than the available sequences while also maintaining the low receiver complexity. For improved performance under highly correlated channel conditions, T-user collaborative coding is also investigated within the CS-CDMA-UL system

PRE-FILTERING IN MC-CDMA DOWNLINK TRANSMISSIONS

Future wireless communication systems are expected to support high-speed and high-quality multimedia services. In theseapplications the received signal is typically affected byfrequency-selective fading, which must be properly counteracted toavoid a severe degradation of the system performance. MC-CDMA is a multiplexing technique that combines OFDM with direct sequence CDMA. It is robust to frequency-selective fading thanks to the underlying OFDM modulation and exploits frequency diversity by spreading the data of different users in the frequency domain. For these reasons it is considered as a promising candidate for the physical layer of future high-speed wireless communications. Recent publications show that MC-CDMA is particularly suitable for downlink transmissions, i.e., from the base station to the mobile terminals. In these applications orthogonal spreading codes are usually employed to provide protection against co-channel interference. In the presence of multipath propagation, however, signals undergo frequency-selective fading and the code orthogonality is lost. This gives rise to multiple-access interference, which strongly limits the system performance. In the past few years several advanced multi-user detection techniques have been proposed and discussed for interference mitigation. However, in spite of their effectiveness, all these methods are quite unattractive for downlink applications since they would entail high complexity and excessive power consumption at the remote units. As an alternative to multi-user detection, pre-filtering techniques can be employed in downlink transmissions to mitigate multiple-access interference and channel distortions. The idea behind pre-filtering is to vary the gain assigned to each subcarrier so that interference is reduced and the signal at the receiver appears undistorted. In this way, simple and low complex single-user detectors can be employed at the remote units, thereby moving most of the computational burden to the base station, where power consumption and computational resources are not critical issues. In general terms, the main contribution of this dissertation is threefold. First, we propose and discuss several linear and non-linear pre-filtering schemes for the downlink of MC-CDMA systems equipped with multiple transmit antennas and operating in a time-division-duplex mode. The resulting schemes are derived according to different optimization criteria and aim at combating the detrimental effects of MAI while maintaining the complexity of the remote units as low as possible. A second contribution comes from providing a unified framework for investigating pre-filtering in the downlink of both MC-CDMA and OFDMA systems. The use of a unified framework comprising both MC-CDMA and OFDMA allows a fair comparison between these multiple-access technologies under the same operating conditions. It turns out that OFDMA outperforms MC-CDMA when the system resources are optimally assigned to the active users according to the actual channel realization. As we shall see, in order to work properly, all the proposed schemes require explicit knowledge of the channel responses of the active users. In time-division-duplex systems this information can be achieved by exploiting the channel reciprocity between alternative uplink and downlink transmissions. If channel variations are sufficiently slow, the channel estimates of the active users can be derived at the base station during an uplink time-slot and reused for pre-filtering in the subsequent downlink time-slot. Thus, a third contribution comes from addressing the problem of channel acquisition in the uplink of an MC-CDMA system equipped with multiple receive antennas

Abstracts on Radio Direction Finding (1899 - 1995)

The files on this record represent the various databases that originally composed the CD-ROM issue of "Abstracts on Radio Direction Finding" database, which is now part of the Dudley Knox Library's Abstracts and Selected Full Text Documents on Radio Direction Finding (1899 - 1995) Collection. (See Calhoun record https://calhoun.nps.edu/handle/10945/57364 for further information on this collection and the bibliography). Due to issues of technological obsolescence preventing current and future audiences from accessing the bibliography, DKL exported and converted into the three files on this record the various databases contained in the CD-ROM. The contents of these files are: 1) RDFA_CompleteBibliography_xls.zip [RDFA_CompleteBibliography.xls: Metadata for the complete bibliography, in Excel 97-2003 Workbook format; RDFA_Glossary.xls: Glossary of terms, in Excel 97-2003 Workbookformat; RDFA_Biographies.xls: Biographies of leading figures, in Excel 97-2003 Workbook format]; 2) RDFA_CompleteBibliography_csv.zip [RDFA_CompleteBibliography.TXT: Metadata for the complete bibliography, in CSV format; RDFA_Glossary.TXT: Glossary of terms, in CSV format; RDFA_Biographies.TXT: Biographies of leading figures, in CSV format]; 3) RDFA_CompleteBibliography.pdf: A human readable display of the bibliographic data, as a means of double-checking any possible deviations due to conversion