Injected and Delivered: Fabricating Implicit Control over Actuation Systems by Spoofing Inertial Sensors

Inertial sensors provide crucial feedback for control systems to determine motional status and make timely, automated decisions. Prior efforts tried to control the output of inertial sensors with acoustic signals. However, their approaches did not consider sample rate drifts in analog-to-digital converters as well as many other realistic factors. As a result, few attacks demonstrated effective control over inertial sensors embedded in real systems. This work studies the out-of-band signal injection methods to deliver adversarial control to embedded MEMS inertial sensors and evaluates consequent vulnerabilities exposed in control systems relying on them. Acoustic signals injected into inertial sensors are out-of-band analog signals. Consequently, slight sample rate drifts could be amplified and cause deviations in the frequency of digital signals. Such deviations result in fluctuating sensor output; nevertheless, we characterize two methods to control the output: digital amplitude adjusting and phase pacing. Based on our analysis, we devise non-invasive attacks to manipulate the sensor output as well as the derived inertial information to deceive control systems. We test 25 devices equipped with MEMS inertial sensors and find that 17 of them could be implicitly controlled by our attacks. Furthermore, we investigate the generalizability of our methods and show the possibility to manipulate the digital output through signals with relatively low frequencies in the sensing channel.Comment: Original publication in the proceedings of the 27th USENIX Security Symposium, 201

Toward a unified PNT, Part 1: Complexity and context: Key challenges of multisensor positioning

The next generation of navigation and positioning systems must provide greater accuracy and reliability in a range of challenging environments to meet the needs of a variety of mission-critical applications. No single navigation technology is robust enough to meet these requirements on its own, so a multisensor solution is required. Known environmental features, such as signs, buildings, terrain height variation, and magnetic anomalies, may or may not be available for positioning. The system could be stationary, carried by a pedestrian, or on any type of land, sea, or air vehicle. Furthermore, for many applications, the environment and host behavior are subject to change. A multi-sensor solution is thus required. The expert knowledge problem is compounded by the fact that different modules in an integrated navigation system are often supplied by different organizations, who may be reluctant to share necessary design information if this is considered to be intellectual property that must be protected

Instructor Activity Recognition Using Smartwatch and Smartphone Sensors

During a classroom session, an instructor performs several activities, such as writing on the board, speaking to the students, gestures to explain a concept. A record of the time spent in each of these activities could be valuable information for the instructors to virtually observe their own style of instruction. It can help in identifying activities that engage the students more, thereby enhancing teaching effectiveness and efficiency. In this work, we present a preliminary study on profiling multiple activities of an instructor in the classroom using smartwatch and smartphone sensor data. We use 2 benchmark datasets to test out the feasibility of classifying the activities. Comparing multiple machine learning techniques, we finally propose a hybrid deep recurrent neural network based approach that performs better than the other techniques

적분 및 매개변수 기법 융합을 이용한 스마트폰 다중 동작에서 보행 항법

학위논문 (박사) -- 서울대학교 대학원 : 공과대학 기계항공공학부, 2020. 8. 박찬국.In this dissertation, an IA-PA fusion-based PDR (Pedestrian Dead Reckoning) using low-cost inertial sensors is proposed to improve the indoor position estimation. Specifically, an IA (Integration Approach)-based PDR algorithm combined with measurements from PA (Parametric Approach) is constructed so that the algorithm is operated even in various poses that occur when a pedestrian moves with a smartphone indoors. In addition, I propose an algorithm that estimates the device attitude robustly in a disturbing situation by an ellipsoidal method. In addition, by using the machine learning-based pose recognition, it is possible to improve the position estimation performance by varying the measurement update according to the poses. First, I propose an adaptive attitude estimation based on ellipsoid technique to accurately estimate the direction of movement of a smartphone device. The AHRS (Attitude and Heading Reference System) uses an accelerometer and a magnetometer as measurements to calculate the attitude based on the gyro and to compensate for drift caused by gyro sensor errors. In general, the attitude estimation performance is poor in acceleration and geomagnetic disturbance situations, but in order to effectively improve the estimation performance, this dissertation proposes an ellipsoid-based adaptive attitude estimation technique. When a measurement disturbance comes in, it is possible to update the measurement more accurately than the adaptive estimation technique without considering the direction by adjusting the measurement covariance with the ellipsoid method considering the direction of the disturbance. In particular, when the disturbance only comes in one axis, the proposed algorithm can use the measurement partly by updating the other two axes considering the direction. The proposed algorithm shows its effectiveness in attitude estimation under disturbances through the rate table and motion capture equipment. Next, I propose a PDR algorithm that integrates IA and PA that can be operated in various poses. When moving indoors using a smartphone, there are many degrees of freedom, so various poses such as making a phone call, texting, and putting a pants pocket are possible. In the existing smartphone-based positioning algorithms, the position is estimated based on the PA, which can be used only when the pedestrian's walking direction and the device's direction coincide, and if it does not, the position error due to the mismatch in angle is large. In order to solve this problem, this dissertation proposes an algorithm that constructs state variables based on the IA and uses the position vector from the PA as a measurement. If the walking direction and the device heading do not match based on the pose recognized through machine learning technique, the position is updated in consideration of the direction calculated using PCA (Principal Component Analysis) and the step length obtained through the PA. It can be operated robustly even in various poses that occur. Through experiments considering various operating conditions and paths, it is confirmed that the proposed method stably estimates the position and improves performance even in various indoor environments.본 논문에서는 저가형 관성센서를 이용한 보행항법시스템 (PDR: Pedestrian Dead Reckoning)의 성능 향상 알고리즘을 제안한다. 구체적으로 보행자가 실내에서 스마트폰을 들고 이동할 때 발생하는 다양한 동작 상황에서도 운용될 수 있도록, 매개변수 기반 측정치를 사용하는 적분 기반의 보행자 항법 알고리즘을 구성한다. 또한 타원체 기반 자세 추정 알고리즘을 구성하여 외란 상황에서도 강인하게 자세를 추정하는 알고리즘을 제안한다. 추가적으로 기계학습 기반의 동작 인식 정보를 이용, 동작에 따른 측정치 업데이트를 달리함으로써 위치 추정 성능을 향상시킨다. 먼저 스마트폰 기기의 이동 방향을 정확하게 추정하기 위해 타원체 기법 기반 적응 자세 추정을 제안한다. 자세 추정 기법 (AHRS: Attitude and Heading Reference System)은 자이로를 기반으로 자세를 계산하고 자이로 센서오차에 의해 발생하는 드리프트를 보정하기 위해 측정치로 가속도계와 지자계를 사용한다. 일반적으로 가속 및 지자계 외란 상황에서는 자세 추정 성능이 떨어지는데, 추정 성능을 효과적으로 향상시키기 위해 본 논문에서는 타원체 기반 적응 자세 추정 기법을 제안한다. 측정치 외란이 들어오는 경우, 외란의 방향을 고려하여 타원체 기법으로 측정치 공분산을 조정해줌으로써 방향을 고려하지 않은 적응 추정 기법보다 정확하게 측정치 업데이트를 할 수 있다. 특히 외란이 한 축으로만 들어오는 경우, 제안한 알고리즘은 방향을 고려해 나머지 두 축에 대해서는 업데이트 해줌으로써 측정치를 부분적으로 사용할 수 있다. 레이트 테이블, 모션 캡쳐 장비를 통해 제안한 알고리즘의 자세 성능이 향상됨을 확인하였다. 다음으로 다양한 동작에서도 운용 가능한 적분 및 매개변수 기법을 융합하는 보행항법 알고리즘을 제안한다. 스마트폰을 이용해 실내를 이동할 때에는 자유도가 크기 때문에 전화 걸기, 문자, 바지 주머니 넣기 등 다양한 동작이 발생 가능하다. 기존의 스마트폰 기반 보행 항법에서는 매개변수 기법을 기반으로 위치를 추정하는데, 이는 보행자의 진행 방향과 기기의 방향이 일치하는 경우에만 사용 가능하며 일치하지 않는 경우 자세 오차로 인한 위치 오차가 크게 발생한다. 이러한 문제를 해결하기 위해 본 논문에서는 적분 기반 기법을 기반으로 상태변수를 구성하고 매개변수 기법을 통해 나오는 위치 벡터를 측정치로 사용하는 알고리즘을 제안한다. 만약 기계학습을 통해 인식한 동작을 바탕으로 진행 방향과 기기 방향이 일치하지 않는 경우, 주성분 분석을 통해 계산한 진행방향을 이용해 진행 방향을, 매개변수 기법을 통해 얻은 보폭으로 거리를 업데이트해 줌으로써 보행 중 발생하는 여러 동작에서도 강인하게 운용할 수 있다. 다양한 동작 상황 및 경로를 고려한 실험을 통해 위에서 제안한 방법이 다양한 실내 환경에서도 안정적으로 위치를 추정하고 성능이 향상됨을 확인하였다.Chapter 1 Introduction 1 1.1 Motivation and Background 1 1.2 Objectives and Contribution 5 1.3 Organization of the Dissertation 6 Chapter 2 Pedestrian Dead Reckoning System 8 2.1 Overview of Pedestrian Dead Reckoning 8 2.2 Parametric Approach 9 2.2.1 Step detection algorithm 11 2.2.2 Step length estimation algorithm 13 2.2.3 Heading estimation 14 2.3 Integration Approach 15 2.3.1 Extended Kalman filter 16 2.3.2 INS-EKF-ZUPT 19 2.4 Activity Recognition using Machine Learning 21 2.4.1 Challenges in HAR 21 2.4.2 Activity recognition chain 22 Chapter 3 Attitude Estimation in Smartphone 26 3.1 Adaptive Attitude Estimation in Smartphone 26 3.1.1 Indirect Kalman filter-based attitude estimation 26 3.1.2 Conventional attitude estimation algorithms 29 3.1.3 Adaptive attitude estimation using ellipsoidal methods 30 3.2 Experimental Results 36 3.2.1 Simulation 36 3.2.2 Rate table experiment 44 3.2.3 Handheld rotation experiment 46 3.2.4 Magnetic disturbance experiment 49 3.3 Summary 53 Chapter 4 Pedestrian Dead Reckoning in Multiple Poses of a Smartphone 54 4.1 System Overview 55 4.2 Machine Learning-based Pose Classification 56 4.2.1 Training dataset 57 4.2.2 Feature extraction and selection 58 4.2.3 Pose classification result using supervised learning in PDR 62 4.3 Fusion of the Integration and Parametric Approaches in PDR 65 4.3.1 System model 67 4.3.2 Measurement model 67 4.3.3 Mode selection 74 4.3.4 Observability analysis 76 4.4 Experimental Results 82 4.4.1 AHRS results 82 4.4.2 PCA results 84 4.4.3 IA-PA results 88 4.5 Summary 100 Chapter 5 Conclusions 103 5.1 Summary of the Contributions 103 5.2 Future Works 105 국문초록 125 Acknowledgements 127Docto

Road Grade Estimation Using Crowd-Sourced Smartphone Data

Estimates of road grade/slope can add another dimension of information to existing 2D digital road maps. Integration of road grade information will widen the scope of digital map's applications, which is primarily used for navigation, by enabling driving safety and efficiency applications such as Advanced Driver Assistance Systems (ADAS), eco-driving, etc. The huge scale and dynamic nature of road networks make sensing road grade a challenging task. Traditional methods oftentimes suffer from limited scalability and update frequency, as well as poor sensing accuracy. To overcome these problems, we propose a cost-effective and scalable road grade estimation framework using sensor data from smartphones. Based on our understanding of the error characteristics of smartphone sensors, we intelligently combine data from accelerometer, gyroscope and vehicle speed data from OBD-II/smartphone's GPS to estimate road grade. To improve accuracy and robustness of the system, the estimations of road grade from multiple sources/vehicles are crowd-sourced to compensate for the effects of varying quality of sensor data from different sources. Extensive experimental evaluation on a test route of ~9km demonstrates the superior performance of our proposed method, achieving $5\times$ improvement on road grade estimation accuracy over baselines, with 90\% of errors below 0.3$^\circ$.Comment: Proceedings of 19th ACM/IEEE Conference on Information Processing in Sensor Networks (IPSN'20

Low Cost Inertial Sensors for the Motion Track-ing and Orientation Estimation of Human Upper Limbs in Neurological Rehabilitation

This paper presents the feasibility of utilizing low cost inertial sensors such as those found in Sony Move, Nintendo Wii (Wii Remote with Wii MotionPlus) and smartphones for upper limb motion mon-itoring in neurorehabilitation. Kalman and complementary filters based on data fusion are used to estimate sensor 3D orientation. Furthermore, a two-segment kinematic model was developed to estimate limb segment position tracking. Performance has been compared with a high-accuracy measurement system using the Xsens MTx. The experimental results show that Sony Move, Wii and smartphones can be used for measuring upper limb orientation, while Sony Move and smartphones can also be used for specific applications of upper limb segment joint orientation and position tracking during neurorehabilitation. Sony Move’s accuracy is within 1.5° for Roll and Pitch and 2.5° for Yaw and position tracking to within 0.5 cm over a 10 cm movement. This accuracy in measurement is thought to be adequate for upper limb orientation and position tracking. Low cost inertial sensors can be used for the accurate assessment/measurement of upper limb movement of patients with neurological disorders and also makes it a low cost replacement for upper limb motion measurements. The low cost inertial sensing systems were shown to be able to accurately measure upper limb joint orienta-tion and position during neurorehabilitation