RapidChiplet: A Toolchain for Rapid Design Space Exploration of Chiplet Architectures

Chiplet architectures are a promising paradigm to overcome the scaling challenges of monolithic chips. Chiplets offer heterogeneity, modularity, and cost-effectiveness. The design space of chiplet architectures is huge as there are many degrees of freedom such as the number, size and placement of chiplets, the topology of the inter-chiplet interconnect and many more. Existing tools for cost and performance prediction are often too slow to explore this design space. We present RapidChiplet, a fast, open-source toolchain to predict latency and throughput of the inter-chiplet interconnect, as well as a chip's manufacturing cost and thermal stability

Vertical III-V Nanowire Transistors for Low-Power Logic and Reconfigurable Applications

With rapid increase in energy consumption of electronics used in our daily life, the building blocks — transistors — need to work in a way that has high energy efficiency and functional density to meet the demand of further scaling. III-V channel combined with vertical nanowire gate-all-around (GAA) device architecture is a promising alternative to conventional Si transistors due to its excellent electrical properties in the channel and electrostatic control across the gate oxide in addition to reduced footprint. Based on this platform, two major objectives of this thesis are included: 1) to improve the performance of III-V p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) and tunnel FETs (TFETs) for low-power digital applications; 2) to integrate HfO2-based ferroelectric gate onto III-V FETs (FeFETs) and TFETs (ferro-TFETs) to enable reconfigurable operation for high functional density.The key bottleneck for all-III-V CMOS is its p-type MOSFETs (p-FETs) which are mainly made of GaSb or InGaSb. Rich surface states of III-Sb materials not only lead to decreased effective channel mobility due to more scattering, but also deteriorate the electrostatics. In this thesis, several approaches to improve p-FET performance have been explored. One strategy is to enhance the hole mobility by introducing compressive strain into III-Sb channel. For the first time, a high and uniform compressive strain near 1% along the transport direction has been achieved in downscaled GaSb nanowires by growing and engineering GaSb-GaAsSb core-shell structure, aiming for potential hole mobility enhancement. In addition, surface passivation using digital etch has been developed to improve the electrostatics with subthreshold swing (SS) down to 107 mV/dec. Moreover, the on-state performance including on-current (Ion) and transconductance (gm) have been enhanced by ∼50% using annealing with H2-based forming gas. Lastly, a novel p-FET structure with (In)GaAsSb channel has been developed and further improved off-state performance with SS = 71 mV/dec, which is the lowest value among all reported III-V p-FETs.Despite subthermionic operation, TFETs usually suffer from low drive current as well as the current operating below 60 mV/dec (I60). The second focus of this thesis is to fine-tune the InAs/(In)GaAsSb heterostructure tunnel junction and the doping in the source segment during epitaxy. As a result, a substantially increased I60 (>1 µA/µm) and Ion up to 40 µA/µm at source-drain bias of 0.5 V have been achieved, reaching a record compared to other reported TFETs.Finally, emerging ferroelectric oxide based on Zr-doped HfO2 (HZO) has been successfully integrated onto III-V vertical nanowire transistors to form FeFETs and ferro-TFETs with GAA architecture. The corresponding electrical performance and reliability have been carefully characterized with both DC and pulsed I-V measurements. The unique band-to-band tunneling in InAs/(In)GaAsSb/GaSb heterostructure TFET creates an ultrashort effective channel, leading to detection of localized potential variation induced by single domains and defects in nanoscale ferroelectric HZO without physical gate-length scaling. By introducing gate/source overlap structure in the ferro-TFET, non-volatile reconfigurable signal modulation with multiple modes including signal transmission, phase shift, frequency doubling, and mixing has been achieved in a single device with low drive voltage and only ∼0.01 µm2 footprint, thus increasing both functional density andenergy efficiency